Deutsch
EnglishMaintenance -> Checking the Wiper Blades for your Ford Kuga 2019-2025
Maintenance
Note: Do not move the wiper arm when the
ADJUSTING THE HEADLAMPS
ignition is on as it may cause damage to the
wiper motor.
Vertical and Horizontal Aim
Adjustment
Replace the wiper blades at least annually
for optimum performance.
Vertical and horizontal aim is adjustable.
We recommend that you see an authorized
dealer.
Front Wiper Blades
WASHER FLUID CHECK
When adding fluid, use a mixture of washer
fluid and water to help prevent freezing
and improve the cleaning capability. For
information on fluid dilution follow the
manufacturer's instructions.
Note: The reservoir supplies the front and
rear washer systems.
E129990
CHECKING THE WIPER
BLADES
1. Lift the wiper arm and then press the
wiper blade locking buttons together.
Note: Do not hold the wiper blade when
lifting the wiper arm.
Note: Make sure that the wiper arm does
not spring back against the glass when the
wiper blade is not attached.
2. Slightly rotate the wiper blade.
3. Remove the wiper blade.
4. Install in the reverse order.
E142463
Note: Make sure that the wiper blade locks
Run the tip of your fingers over the edge of
the blade to check for roughness.
into place.
Clean the wiper blades with washer fluid
or water applied with a soft sponge or
cloth.
CHANGING THE WIPER
BLADES
Clean the wiper blades and the windshield
to improve wiper performance.
380
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing
Maintenance
Note: Handle a halogen headlamp bulb
Rear Window Wiper Blade
carefully and keep out of children’s reach.
Grasp the bulb by only its plastic base and
do not touch the glass. The oil from your
hand could cause the bulb to break the next
time you operate the headlamps.
Note: If you accidentally touch the bulb,
clean it with rubbing alcohol before using it.
Headlamp
E271380
1. Lift the wiper arm.
E307881
Note: Do not hold the wiper blade when
lifting the wiper arm.
A
B
C
Park/Turn lamp
High beam headlamp
Low beam headlamp
Note: Make sure that the wiper arm does
not spring back against the glass when the
wiper blade is not attached.
2. Remove the wiper blade.
High beam headlamp
Note: Make sure that the wiper blade locks
into place.
CHANGING A BULB
Replacing Headlamp Bulbs
WARNING: Make sure the bulbs
have cooled down before removing
them. Failure to follow this warning could
result in serious personal injury.
E307882
1. Remove service cap.
381
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing
