Deutsch
EnglishSeats -> Head Restraints for your Ford Focus 2010-2017
Seats
Rear center head restraint
WARNINGS
The adjustable head restraint is a
safety device. Whenever possible, it
should be installed and properly
adjusted when the seat is occupied. Failure
to adjust the head restraint properly could
reduce its effectiveness during certain
impacts.
Install the head restraint properly to
help minimize the risk of neck injury
in the event of a crash.
E198013
Note: Adjust the seatback to an upright
driving position before adjusting the head
restraint. Adjust the head restraint so that
the top of it is level with the top of your head
and as far forward as possible. Make sure
that you remain comfortable. If you are
extremely tall, adjust the head restraint to
its highest position.
The head restraints consist of:
A
An energy absorbing head
restraint.
Two steel stems.
B
C
Guide sleeve adjust and release
button.
Frontseatandrearseatoutboardhead
D
Guide sleeve unlock and remove
button.
restraints
Adjusting the Head Restraint
Raising the Head Restraint
Pull the head restraint up.
Lowering the Head Restraint
1. Press and hold button C.
2. Push the head restraint down.
E138642
Removing the Head Restraint
1. Pull the head restraint up until it
reaches its highest position.
2. Press and hold buttons C and D.
3. Pull the head restraint up.
Note: For the front head restraints, you may
need to use a key or similar object to release
the head restraint. Press the key into the
guide sleeve unlock and remove button to
release the head restraint.
111
Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing
Seats
Installing the Head Restraint
Align the steel stems into the guide sleeves
and push the head restraint down until it
locks.
WARNINGS
Rock the seat backward and forward
after releasing the lever to make sure
that it is fully engaged.
Tilting Head Restraints (If Equipped)
The manual front seats may consist of:
The front head restraints tilt for extra
comfort. To tilt the head restraint, do the
following:
E197725
A
B
C
A bar to move the seat backward
and forward.
A lever to adjust the height of the
seat.
A lever to adjust the angle of the
seatback.
E144727
1. Adjust the seatback to an upright
driving or riding position.
2. Pivot the head restraint forward toward
POWER SEATS
your head to the desired position.
WARNINGS
After the head restraint reaches the
forward-most tilt position, pivoting it
forward again will then release it to the
rearward, un-tilted position.
Do not adjust the driver seat or
seatback when your vehicle is
moving. Adjusting your seatback
while your vehicle is in motion may cause
loss of control of your vehicle.
MANUAL SEATS
Reclining the seatback can cause an
occupant to slide under the seat's
safety belt, resulting in severe
WARNINGS
Do not adjust the driver seat or
seatback when your vehicle is
personal injuries in the event of a crash.
moving. Adjusting your seatback
while your vehicle is in motion may cause
loss of control of your vehicle.
112
Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing
Seats
E194195
1
Power Lumbar(If Equipped)
1
E187688
E156656
REAR SEATS
Folding the Seatback
1. Press the unlock buttons down.
2. Push the seatback forward.
Note: Before lowering the seatback(s),
remove the outboard head restraints. See
Head Restraints (page 110).
Note: Your vehicle may have split
seatbacks that must be folded individually.
113
Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing
