Deutsch
EnglishMaintenance -> Opening and Closing the Hood for your Ford Focus 2010-2017
Maintenance
Working with the Engine On
GENERAL INFORMATION
Have your vehicle serviced regularly to help
maintain its roadworthiness and resale
value. There is a large network of
WARNING
To reduce the risk of vehicle damage
and/or personal burn injuries, do not
start your engine with the air cleaner
removed and do not remove it while the
engine is running.
authorized dealers that are there to help
you with their professional servicing
expertise. We believe that their specially
trained technicians are best qualified to
service your vehicle properly and expertly.
They are supported by a wide range of
highly specialized tools developed
1. Set the parking brake and shift to park
(P).
2. Block the wheels.
specifically for servicing your vehicle.
If your vehicle requires professional service,
an authorized dealer can provide the
necessary parts and service. Check your
warranty information to find out which
parts and services are covered.
Use only recommended fuels, lubricants,
fluids and service parts conforming to
specifications. Motorcraft® parts are
designed and built to provide the best
performance in your vehicle.
OPENING AND CLOSING THE
HOOD
1. Inside the vehicle, pull the hood release
handle located under the left-hand
side of the instrument panel.
Precautions
•
•
Do not work on a hot engine.
Make sure that nothing gets caught in
moving parts.
•
Do not work on a vehicle with the
engine running in an enclosed space,
unless you are sure you have enough
ventilation.
E142457
•
Keep all open flames and other burning
material (such as cigarettes) away
from the battery and all fuel related
parts.
2. Go to the front of your vehicle and
locate the secondary release lever
under the front of the hood, left of
center, and push it to your right-hand
side to release.
Working with the Engine Off
1. Set the parking brake and shift to park
(P).
2. Switch off the engine.
3. Block the wheels.
212
Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing
Maintenance
3. Lift the hood and support it with the
prop rod.
4. To close the hood, remove the support
rod from the catch and secure
correctly.
5. Lower the hood and allow it to drop
under its own weight for the last 8 in
to 12 in (20 cm to 30 cm).
Note: Make sure the hood is fully closed.
E189028
213
Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing
Maintenance
UNDER HOOD OVERVIEW - 1.0L ECOBOOST™
B
A
C
E
D
I
H
G
F
E141341
A
Brake and clutch fluid reservoir (right-hand drive). See Brake Fluid Check
(page 222).
B
C
Engine oil filler cap. See Engine Oil Check (page 216).
Brake and clutch fluid reservoir (left-hand drive). See Brake Fluid Check (page
222).
D
E
F
G
H
I
Battery. See Changing the 12V Battery (page 223).
Power distribution box. See Fuses (page 201).
Air filter assembly. See Changing the Engine Air Filter (page 235).
Engine oil dipstick. See Engine Oil Dipstick (page 216).
Windshield washer fluid reservoir. See Washer Fluid Check (page 223).
Engine coolant reservoir. See Engine Coolant Check (page 218).
214
Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing
Maintenance
UNDER HOOD OVERVIEW - 2.0L
A
B
C
D
E
H
G
F
E212129
A
B
C
D
E
F
G
H
Engine coolant reservoir. See Engine Coolant Check (page 218).
Engine oil filler cap. See Engine Oil Check (page 216).
Brake and clutch fluid reservoir. See Clutch Fluid Check (page 222).
Battery. See Changing the 12V Battery (page 223).
Engine compartment fuse box. See Fuses (page 201).
Air filter assembly. See Changing the Engine Air Filter (page 235).
Engine oil dipstick. See Engine Oil Check (page 216).
Windshield washer fluid reservoir. See Washer Fluid Check (page 223).
215
Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing
