Deutsch
EnglishMaintenance -> Changing a Bulb for your Ford Fiesta 2017-2023
Maintenance
Reversing Lamp
CHANGING A BULB
WARNING: Switch the lamps and
the ignition off. Failure to do so could
result in serious personal injury.
WARNING: Lamps and associated
components become hot when in use.
Let them cool down before you remove
them.
3
Use the correct specification bulb. See
Bulb Specification Chart (page 311).
Headlamp
E236638
You may have to remove the headlamp
assembly prior to replacing a bulb. See
Removing a Headlamp (page 253).
1. Open the liftgate.
2. Carefully remove the cover.
Reflector Headlamp
3. Turn the wing nut counterclockwise
and remove it.
A
E249611
A
Daytime running lamp.
E238054
4. Remove the lamp.
5. Disconnect the electrical connector.
6. To install, reverse the removal
procedure.
255
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Maintenance
A
B
C
E236599
E249637
3. Turn the bulb holder counterclockwise
A
B
Front direction indicator.
and remove it.
High beam headlamp and
Note: You cannot separate the bulb from
daytime running lamp.
the bulb holder.
C
Low beam headlamp.
4. To install, reverse the removal
procedure.
Low Beam Headlamp
1. Carefully remove the cover.
Note: Do not touch the bulb glass.
Projector Headlamp
A
E249634
E249612
2. Press the clip up to release the bulb
holder.
A
Daytime running lamp.
3. Remove the bulb holder by pulling it
straight out.
A
B
C
4. Remove the bulb by pulling it straight
out.
5. To install, reverse the removal
procedure.
Note: Do not touch the bulb glass.
E236599
High Beam Headlamp and Daytime
Running Lamp
A
B
C
Front direction indicator.
High beam headlamp.
Low beam headlamp.
1. Carefully remove the cover.
2. Disconnect the electrical connector.
256
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Maintenance
Low Beam Headlamp
Daytime Running Lamp
1. Carefully remove the cover.
These lamps have LEDs.
2. Disconnect the electrical connector.
Note: We recommend that you have LEDs
changed by an authorized dealer.
Front Direction Indicator
E249647
3. Turn the bulb holder counterclockwise
and remove it.
E236630
4. Remove the bulb.
1. Turn the bulb holder counterclockwise
and remove it.
5. To install, reverse the removal
procedure.
2. Press the bulb in and turn the bulb
Note: Do not touch the bulb glass.
counterclockwise to remove it.
High Beam Headlamp
1. Carefully remove the cover.
3. To install, reverse the removal
procedure.
LED Headlamp
A
E249660
E272995
2. Press the clip up to release the bulb
holder.
A
Daytime running lamp.
3. Remove the bulb holder by pulling it
straight out.
These lamps have LEDs.
4. Remove the bulb by pulling it straight
out.
Note: We recommend that you have LEDs
changed by an authorized dealer.
5. To install, reverse the removal
procedure.
Note: Do not touch the bulb glass.
257
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Maintenance
Note: Do not touch the bulb glass.
Front Fog Lamp
ST, ST Line and Vignale
All Vehicles - Excluding: ST, ST Line
and Vignale
E159695
1. Use a suitable tool, for example a
screwdriver, to carefully remove the
wheel arch liner fasteners. Pull the
wheel liner back toward the tire to gain
access to the bulb.
E273066
1. Use a suitable tool, for example a
screwdriver, to carefully remove the
housing cover.
2. Disconnect the electrical connector.
2
2
2
E273068
2. Remove the screws and the lamp.
3. Disconnect the electrical connector.
4. Turn the bulb holder counterclockwise
and remove it.
Note: You cannot separate the bulb from
E236628
the bulb holder.
5. To install, reverse the removal
3. Turn the bulb holder counterclockwise
and remove it.
procedure.
Note: You cannot separate the bulb from
the bulb holder.
4. To install, reverse the removal
procedure.
258
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Maintenance
Side Direction Indicator
E283366
4. Use a suitable tool, for example a
E283364
screwdriver, to push the housing cover
through the access hole and remove it.
1. Use a suitable tool, for example a
screwdriver, to carefully lever the mirror
glass from the lower outer edge and
remove it.
2. Unplug the connector from the rear
side of the glass.
E283367
5. Use a T10 Torx screwdriver to remove
the lamp body.
E283365
3. Use a suitable tool, for example a
screwdriver, to carefully press the two
housing cover clips and release them.
259
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Maintenance
2. Press the bulb in and turn the bulb
counterclockwise to remove it.
3. To install, reverse the removal
procedure.
Note: High series have LEDs.
Note: We recommend that you have LEDs
changed by an authorized dealer.
Rear Direction Indicator
E283430
2
1
6. Turn the bulb holder clockwise and
remove it.
7. Pull the bulb straight out.
8. To install, reverse the removal
procedure.
Note: Make sure that both mirror housing
cover clips lock into position.
Note: We recommend that you have bulbs
E236635
changed by an authorized dealer.
1. Turn the bulb holder counterclockwise
and remove it.
Rear Lamp
Remove the rear lamp assembly prior to
replacing any bulb. See Removing a Rear
Lamp (page 254).
2. Press the bulb in and turn the bulb
counterclockwise to remove it.
3. To install, reverse the removal
procedure.
Rear Lamp and Stoplamp
Reversing Lamp
2
1
2
E236636
1. Turn the bulb holder counterclockwise
and remove it.
E236634
1. Turn the bulb holder counterclockwise
and remove it.
2. Press the bulb in and turn the bulb
counterclockwise to remove it.
260
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Maintenance
3. To install, reverse the removal
procedure.
License Plate Lamp
These lamps have LEDs.
Note: We recommend that you have LEDs
changed by an authorized dealer.
High Mounted Stoplamp
These lamps have LEDs.
Note: We recommend that you have LEDs
changed by an authorized dealer.
Rear Fog Lamp
Access the underside of your vehicle
behind the rear wheel.
2
E236637
1. Turn the bulb holder counterclockwise
and remove it.
2. Press the bulb in and turn the bulb
counterclockwise to remove it.
3. To install, reverse the removal
procedure.
261
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
