Deutsch
EnglishLighting -> Front Fog Lamps for your Ford Fiesta 2017-2023
Lighting
Switching Automatic High Beam Control On or Off
To switch the system on or off, use the information display controls on the steering
wheel to select the following:
Menu Item
Settings
Action
Press the menu button.
Press the OK button.
Press the OK button.
Press the OK button.
Vehicle settings
Lighting
Auto highbeam
Automatic High Beam Indicator
Overriding Automatic High Beam
Control
It illuminates to confirm when
the system is ready to assist.
Push the lever away from you to switch
between high beam and low beam.
Automatic High Beam Control Information Messages
Message
Description
Front camera Low visib- The camera has reduced visibility. Clean the windshield. If
ility Clean screen
the message continues to appear, have your vehicle checked
as soon as possible.
Front camera temporarily The camera has malfunctioned. Wait a short period of time
not available
for the camera to cool down. If the message continues to
appear, have your vehicle checked as soon as possible.
You can switch the front fog lamps on if
any of the following occur:
FRONT FOG LAMPS
•
•
•
You set the lighting control to the
parking lamps position.
SwitchingtheFrontFogLampsOn
You set the lighting control to the
headlamps position.
You set the lighting control to the
autolamps position and the headlamps
are on.
or Off
Only switch the front fog lamps on during
reduced visibility.
The front fog lamp button is on the lighting
control.
Press the button to switch the
front fog lamps on or off.
74
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Lighting
Note: The brightness of the daytime running
HEADLAMP LEVELING
lamps may decrease when the front fog
lamps are switched on.
To adjust the level of the headlamp
beams, do the following:
Front Fog Lamp Indicator
It illuminates when you switch
the front fog lamps on.
2
REAR FOG LAMPS
Switching the Rear Fog Lamps On
2
or Off
1
WARNING: Do not use the rear fog
lamps when it is raining or snowing and
visibility is more than 50 m (164.0 ft).
E132711
You can switch the rear fog lamps on if any
of the following occur:
1. Press to release the control.
•
•
You switched the front fog lamps on.
2. Rotate the control in accordance with
your vehicle load to prevent you from
distracting other road users when the
headlamps are on.
You set the lighting control to the
headlamps position.
•
You set the lighting control to the
autolamps position and the headlamps
are on.
Note: Set the control to zero when your
vehicle is unloaded.
Note: Set the headlamp beams to give
between 35–100 m (115–328 ft) of road
surface illumination when your vehicle is
partially or fully loaded.
The rear fog lamp button is on the lighting
control.
Press the button to switch the
rear fog lamps on or off.
3. Press to close the control.
Rear Fog Lamp Indicator
It illuminates when you switch
the rear fog lamps on.
75
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
