Deutsch
EnglishDriving Aids -> Traffic Sign Recognition for your Ford Fiesta 2017-2023
Driving Aids
Note: The system may not correctly operate
Note: Traffic sign data provided by the
navigation system contains information
integrated to the data carrier release.
when towing a trailer. For vehicles with a
trailer tow module and tow bar approved
by us, the system turns off when you attach
a trailer. For vehicles with an aftermarket
trailer tow module or tow bar, we
The system detects recognizable traffic
signs, for example:
•
•
•
•
Speed limit signs.
No overtaking signs.
Speed limit cancellation signs.
No overtaking cancellation signs.
recommend that you switch the system off
when you attach a trailer.
To permanently switch the system off,
contact an authorized dealer.
Note: The system may not detect all traffic
TRAFFIC SIGN RECOGNITION
Principle of Operation
signs and may incorrectly read signs.
Note: In cold and severe weather conditions
the system may not function. Rain, snow,
spray and large contrasts in lighting can all
prevent the sensor from correctly
functioning.
Note: If your vehicle has a suspension kit
not approved by us, the system may not
correctly function.
WARNING: You are responsible for
controlling your vehicle at all times. The
system is designed to be an aid and does
not relieve you of your responsibility to
drive with due care and attention. Failure
to follow this instruction could result in
the loss of control of your vehicle,
personal injury or death.
Note: Always fit Ford original parts when
replacing headlamp bulbs. Other bulbs may
reduce system performance.
The system turns on when you switch the
ignition on and you cannot switch the
system off.
WARNING: The system may not
operate properly if the sensor is blocked.
Keep the windshield free from
obstruction.
Using Traffic Sign Recognition
Setting the System Speed Warning
You can set the system speed warning to
alert you when the vehicle speed exceeds
the speed limit recognized by the system
by a certain speed tolerance.
The system is designed to detect traffic
signs to inform you of the current speed
limit and overtaking regulations. Detected
traffic signs appear in the information
display. The sensor is behind the interior
mirror.
Note: Do not carry out windshield repairs
in the immediate area surrounding the
sensor.
198
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Driving Aids
To switch the system speed warning on or off, or to adjust the speed warning
settings, use the information display controls on the steering wheel to select the
following:
Menu Item
Driver assist.
Traffic sign recognition
Action
Press the menu button.
Press the OK button.
Activate speed warning Press the OK button.
Speed warning
Tolerance
Press the menu button.
Press the OK button. Press the toggle button upward or
downward to choose your required speed setting. Press the
OK button.
Overspeed chime
Press the OK button.
The system displays recognizable traffic
Traffic Sign Recognition System
Display
signs in four stages as follows:
1. All new traffic signs appear brighter
than the others in the display.
2. After a predetermined time they
display normally.
3. After a predetermined distance they
are greyed out.
4. After another predetermined distance
they are deleted.
If the system detects a supplementary
traffic sign, it displays below the respective
traffic sign. For example, when passing a
reduced speed limit in wet road conditions
sign.
Note: If your vehicle has a navigation
system, stored traffic sign data may
influence the indicated speed limit value.
E132994
The system can display two traffic signs
in parallel.
You can view the status at any time using
the information display.
199
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Driving Aids
Traffic Sign Recognition System Messages
Message
Action
Traffic sign recognition
Reduced performance
See manual
The traffic sign data provided by the navigation system is
unavailable due to weak or no signal. Wait for a short period
of time for the signal to improve. If the message continues
to appear, have your vehicle checked as soon as possible.
Note: In cold and severe weather conditions
the system may not function. Rain, snow,
SPEED SIGN RECOGNITION
Principle of Operation
spray and large contrasts in lighting can all
prevent the sensor from correctly
functioning.
Note: If your vehicle has a suspension kit
not approved by us, the system may not
correctly function.
Note: Always fit Ford original parts when
replacing headlamp bulbs. Other bulbs may
reduce system performance.
The system turns on when you switch the
ignition on and you cannot switch the
system off.
WARNING: You are responsible for
controlling your vehicle at all times. The
system is designed to be an aid and does
not relieve you of your responsibility to
drive with due care and attention. Failure
to follow this instruction could result in
the loss of control of your vehicle,
personal injury or death.
WARNING: The system may not
operate properly if the sensor is blocked.
Keep the windshield free from
obstruction.
Using Speed Sign Recognition
Setting the System Speed Warning
You can set the system speed warning to
alert you when the vehicle speed exceeds
the speed limit recognized by the system
by a certain speed tolerance.
The system is designed to detect speed
limit signs to inform you of the current
speed limit. Detected speed signs appear
in the information display. The sensor is
behind the interior mirror.
Note: The system remembers the last
setting when you start your vehicle.
Note: Do not carry out windshield repairs
in the immediate area surrounding the
sensor.
Note: Speed sign data provided by the
navigation system contains information
integrated to the data carrier release.
1. Using the information display controls
on the steering wheel, select Driver
assist..
2. Select Traffic sign recognition.
3. Select Activate Traff. Sign Recog..
4. Select Activate speed warning.
5. Select Speed warning.
Note: The system may not detect all speed
signs and may incorrectly read signs.
6. Select Tolerance.
7. Select a setting and press the OK
button.
200
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
