Deutsch
EnglishDoors and Locks for your Ford Fiesta 2017-2023
Doors and Locks
Reprogramming the Unlocking
LOCKING AND UNLOCKING
Power Door Locks
Function
You can program the unlocking function
so that only the driver door unlocks.
The power door lock control is on the driver
door.
Press and hold the unlock and lock buttons
on the remote control simultaneously for
at least four seconds with the ignition off.
The direction indicators flash twice to
confirm the change.
Press the button to unlock all
doors.
Press the button to lock all
doors.
To return to the original unlocking function,
repeat the process.
You can also change between the
unlocking modes in the information
display.
Door Lock Indicator
An LED on the power door lock control
illuminates when you lock the door. It
remains on for up to five minutes after you
switch the ignition off.
Central Locking
Press the button to lock all
doors. One short flash of the
Door Lock Switch Inhibitor
direction indicators confirms that
your vehicle has locked.
When you electronically lock your vehicle,
the power door lock switch no longer
operates after 20 seconds. You must
unlock your vehicle with the remote
control, or switch the ignition on, to restore
function to these switches.
Note: The locking only operates if the front
doors are fully closed.
Double Locking the Doors
Remote Control
WARNING: Do not use double
locking when passengers or animals are
inside your vehicle. The doors cannot be
unlocked or opened from the inside when
double locked.
You can only use the remote control when
your vehicle is stationary.
Unlocking the Doors
Press the button to unlock all
Double locking is a theft protection feature
that prevents someone from opening the
doors from the inside. You can only double
lock the doors if all the doors are closed.
doors. One long flash of the
direction indicators confirms that
your vehicle has unlocked.
Note: You can unlock the driver door with
the key. Use the key if the remote control
does not operate.
Press the button twice within
three seconds. Three short
flashes of the direction
indicators confirms that your vehicle has
double locked.
Note: When you leave your vehicle
unattended for several weeks, the remote
control turns off. Unlocking and starting
your vehicle enables the remote control.
Note: If you unlock the liftgate, all other
doors return to the central locked state. You
must double lock your vehicle again.
54
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Doors and Locks
Vehicles without Anti-Theft Alarm
Mislock
When you press the lock button on the
remote control once, the direction
indicators do not flash if:
This warns you that your vehicle has not
locked.
Vehicles with Anti-Theft Alarm
•
Any door or the liftgate is open.
When you press the lock button once, the
The horn sounds when you press the lock
button on the remote control again within
three seconds and a door is open.
direction indicators do not flash if:
•
•
Any door or the liftgate is open.
The hood is open.
Switching Mislock On or Off
If you switch mislock off, the horn does not
sound if you press the lock button on the
remote control when a door is open.
The horn sounds when you press the lock
button on the remote control again within
three seconds and a door is open.
To switch mislock on or off, use the information display controls on the steering
wheel to select the following:
Menu Item
Action
Settings
Press the menu button.
Press the OK button.
Press the OK button.
Press the OK button.
Vehicle settings
Locks
Mislock chirp
Autounlock
Auto Relock
Autounlock unlocks all the doors when all
The doors automatically relock if you do
not open a door within 45 seconds of
unlocking the doors with the remote
control. The door locks and the alarm
return to their previous state.
of the following occur:
•
•
•
The ignition is on, all the doors are
closed and your vehicle is moving at a
speed greater than 20 km/h (12 mph).
Your vehicle comes to a stop and you
switch the ignition off or to the
accessory position.
You open the driver door within 10
minutes of switching the ignition off or
to the accessory position.
55
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Doors and Locks
Switching Autounlock On or Off
To switch autounlock on or off, use the information display controls on the steering
wheel to select the following:
Menu Item
Settings
Action
Press the menu button.
Press the OK button.
Press the OK button.
Press the OK button.
Vehicle settings
Locks
Auto unlock
3. Gently pull the lock cylinder cap toward
you to release it.
Locking and Unlocking the Doors
From Inside
Use the power door lock control on the
driver door to lock or unlock the doors from
inside.
4. Insert the key blade into the lock
cylinder.
Locking the Doors
Turn the top of the key toward the front of
Locking and Unlocking the Doors
your vehicle.
with the Key Blade
Double Locking the Doors
Removing the Lock Cylinder Cap
1. Release the key blade from the remote
control. See Remote Control (page
39).
Turn the top of the key toward the front of
your vehicle twice within three seconds.
Unlocking the Driver Door
Turn the top of the key toward the rear of
your vehicle.
Note: If the child safety locks are on and
you pull the interior handle, you only switch
off the emergency locking, not the child
safety lock. You can only open the doors
using the external door handle.
E243949
2. Fully insert the key blade into the key
slot.
56
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Doors and Locks
Reinstalling the Lock Cylinder Cap
If the central locking function does not
operate, lock the doors individually using
the key in the position shown.
Left-Hand Side
Turn counterclockwise to lock.
Right-Hand Side
Turn clockwise to lock.
Unlocking the Doors
If the central locking function does not
operate, unlock the driver door and then
unlock all other doors individually by
pulling the interior door handles.
Note: When the doors have been unlocked
using this method, the doors must be locked
individually until the central locking function
has been repaired.
E244050
1. Place the cap over the lock cylinder.
2. Push the cap forward until it clicks into
place. Make sure you have properly
installed the cap by trying to move it
rearward.
Locking and Unlocking the Doors
Individually with the Key Blade
KEYLESS ENTRY
Principle of Operation
Locking the Doors
The system allows you to lock and unlock
your vehicle without taking the passive key
out of your pocket or purse.
E78276
E112203
57
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Doors and Locks
A valid passive key must be within one of
After locking the doors with the lock
sensor, there is a brief delay before you can
unlock your vehicle. This delay lets you
pull the handle to make sure your vehicle
is locked. When the delay period is over,
you can unlock the doors again, provided
the passive key is within the respective
detection range.
the three external detection ranges. These
are approximately 1.5 m (5 ft) from the
front door handles and the liftgate.
The system could not function if:
•
The passive key remains stationary for
about a minute.
•
•
•
The vehicle battery has no charge.
The passive key battery has no charge.
Unlocking the Doors
Unlock sensors are on the back of the
The passive key frequencies are
exterior front door handles.
jammed.
•
The passive key is too close to metal
objects or electronic devices, for
example keys or a cell phone.
If the system does not function, use the
remote control or the key blade to lock and
unlock your vehicle.
E248553
Touch the unlock sensor to unlock your
vehicle and disarm the alarm. The
Locking the Doors
direction indicators flash. Do not touch the
Lock sensors are on the top of the exterior
lock sensor on the top of the door handle.
front door handles.
Keep the door handle clean to make sure
the system correctly operates.
After unlocking the doors with the unlock
sensor, there is a brief delay before you can
lock your vehicle. When the delay period
is over, you can lock the doors again,
provided the passive key is within the
respective detection range.
E248554
Touch a lock sensor once to lock your
vehicle and arm the alarm. The direction
indicators flash.
Touch a lock sensor twice within three
seconds to double lock your vehicle and
arm the alarm. The direction indicators
flash. Do not touch the unlock sensor on
the back of the door handle.
Unlocking the Driver Door
You can program the unlocking function
so that only the driver door unlocks when
you touch the unlock sensor. See Locking
and Unlocking (page 54).
Keep the door handle clean to make sure
the system correctly operates.
Note: Your vehicle does not automatically
lock. If you do not touch a lock sensor your
vehicle remains unlocked.
58
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
Doors and Locks
If you program the unlocking function so
Deactivated Passive Keys
that only the driver door unlocks, the
following occurs:
The system deactivates passive keys left
inside your vehicle when you lock it. You
cannot switch the ignition on using a
deactivated passive key. Press the unlock
button on the remote control to reactivate
a passive key.
•
If you open the driver door first, all
other doors remain locked. You can
unlock all of the other doors from inside
your vehicle using the power door lock
control on the driver door. You can
unlock individual doors by pulling the
interior door handles on those doors.
Switching Keyless Entry On or Off
1. Using the information display controls
•
If you open the front passenger door
first, all of the other doors and the
liftgate unlock.
on the steering wheel, select Settings.
2. Select Vehicle settings.
3. Select Locks.
4. Select KeyFree.
Unlocking the Liftgate
E190028
Press the exterior release button hidden
above the license plate.
Note: A valid passive key must be within
the detection range.
Locking the Liftgate
The liftgate locks after you fully close it.
Smart Unlocks for Passive Keys
If you electronically lock your vehicle with
a rear door or the liftgate open, the system
searches for a passive key inside your
vehicle after you close the last door. If the
system detects a key, all doors unlock
indicating that a key is inside.
Note: Your vehicle locks if another passive
key is within the detection range after you
close the last door.
59
Fiesta (CE1) Vehicles Built From: 06-01-2020 Vehicles Built Up To: 19-04-2020, CG3654en enGBR, Edition date: 201909, Second-Printing
