Deutsch
EnglishInstrument panels -> Trip computer for your Citroen C5 Aircross 2017-2025
Instruments
Display of the different trip computer tabs
With CITROËN Connect Nav
Trip computer
1
Information displayed about the current journey
F Press this button, located on the end of the
wiper control stalk, to display the different
tabs in turn.
F Press this button to select the
Settings menu.
(range, fuel consumption, average speed, etc.).
-
The current information with:
Display of data in the
instrument panel
F Select "OPTIONS".
•
•
•
the range,
the current fuel consumption,
the Stop & Start time counter.
F Select "Screen configuration".
-
Trip "1" with:
•
•
•
the average speed,
the average fuel consumption,
the distance travelled,
F Select the "Brightness" tab.
F Adjust the brightness by pressing
the arrows or moving the slider.
for the first trip.
-
Trip "2" with:
F Press this button to save and exit.
•
•
•
the average speed,
the average fuel consumption,
the distance travelled,
for the second trip.
With instrument panels with dials
The display of trip computer data is selected by
pressing on the end of the wiper control stalk or
by rotating the thumb wheel situated to the left
of the steering wheel.
You can also switch off the screen:
Trip reset
F Press this button to select the
Settings menu.
F Select "Switch off screen".
With digital instrument panel
Trip computer data is displayed permanently
when you select the display mode "DRIVING"
or "PERSONAL", depending on version.
In all other display modes, pressing the end of
the wiper control stalk will cause this data to
appear temporarily in a specific window.
The screen goes off completely.
F Press the screen again (anywhere on its
surface) to activate it.
F When the desired trip is displayed, press
the button on the end of the wiper control
stalk for more than 2 seconds.
Trips "1" and "2" are independent and are used
identically.
31
Instruments
Current fuel consumption
Stop & Start time counter
A few definitions…
(mpg or l/100 km or km/l)
Range
(minutes/seconds or hours/minutes)
Calculated during the last few
seconds.
(miles or km)
The distance which can
If your vehicle is fitted with Stop & Start, a time
counter calculates the time spent in STOP
mode during a journey.
It resets to zero every time the ignition is
switched on.
still be travelled with the
fuel remaining in the tank
(depending on the average
fuel consumption over the
last few miles (kilometres)
travelled).
This function is only displayed from 19 mph
(30 km/h).
Average fuel consumption
Touch screen
(mpg or l/100 km or km/l)
This system gives access to:
This value may vary following a change in
the style of driving or the terrain, resulting
in a significant change in the current fuel
consumption.
Calculated since the last trip
computer reset.
-
the permanent display of the time and
the exterior temperature (a blue symbol
appears when there is a risk of ice).
the heating/air conditioning controls.
the menus for adjusting settings for vehicle
functions and systems.
-
-
Average speed
When the range falls below 19 miles (30 km),
dashes are displayed.
After filling with at least 5 litres of fuel, the
range is recalculated and is displayed if it
exceeds 62 miles (100 km).
(mph or km/h)
-
-
the audio system and telephone controls
and the display of associated information.
the display of visual manoeuvring aid
functions (visual parking sensor information,
Park Assist, etc.).
Calculated since the last trip
computer reset.
-
Internet services and the display of
associated information.
Distance travelled
If dashes instead of figures continue
to be displayed when driving, contact
a CITROËN dealer or a qualified workshop.
(miles or km)
and, depending on equipment, it gives access
to:
-
Calculated since the last trip
computer reset.
the mode and intensity adjustment for the
massage function of the front seats.
the navigation system controls and the
display of associated information.
-
32
