Deutsch
EnglishInstrument panels -> Manual test for your Citroen C5 Aircross 2017-2025
Instruments
and the vehicle's ambient lighting or button B
to reduce it.
Release the button when the desired level is
reached.
Trip distance recorder
Distance recorders
It measures the distance travelled since it was
reset by the driver.
With CITROËN Connect
Radio
F Press this button to select the
Settings menu.
The total and trip distances are displayed for
thirty seconds when the ignition is switched off,
when the driver's door is opened and when the
vehicle is locked or unlocked.
F Select "Brightness".
Resetting the trip recorder
F Adjust the brightness by pressing
F With the ignition on, press the button until
the arrows or moving the slider.
zeros appear.
When travelling abroad, you may need to
change the units of distance and speed:
The display of distance and speed must
be expressed in the official unit of the
country (km or miles). The change of units
is done via the screen configuration menu,
with the vehicle stationary.
Lighting dimmer
The settings are applied immediately.
F Press outside the settings window to exit.
This system allows the brightness of the
instruments and controls to be adjusted to suit
the ambient light level.
You can also switch off the screen:
F Press this button to select the
Settings menu.
With buttons
F Select "Dark".
Total distance recorder
It measures the total distance travelled by the
vehicle since its first registration.
The screen goes off completely.
F Press the screen again (anywhere on its
surface) to activate it.
With the lamps on, press button A to increase
the brightness of the instruments and controls
30
Instruments
Display of the different trip computer tabs
With CITROËN Connect Nav
Trip computer
1
Information displayed about the current journey
F Press this button, located on the end of the
wiper control stalk, to display the different
tabs in turn.
F Press this button to select the
Settings menu.
(range, fuel consumption, average speed, etc.).
-
The current information with:
Display of data in the
instrument panel
F Select "OPTIONS".
•
•
•
the range,
the current fuel consumption,
the Stop & Start time counter.
F Select "Screen configuration".
-
Trip "1" with:
•
•
•
the average speed,
the average fuel consumption,
the distance travelled,
F Select the "Brightness" tab.
F Adjust the brightness by pressing
the arrows or moving the slider.
for the first trip.
-
Trip "2" with:
F Press this button to save and exit.
•
•
•
the average speed,
the average fuel consumption,
the distance travelled,
for the second trip.
With instrument panels with dials
The display of trip computer data is selected by
pressing on the end of the wiper control stalk or
by rotating the thumb wheel situated to the left
of the steering wheel.
You can also switch off the screen:
Trip reset
F Press this button to select the
Settings menu.
F Select "Switch off screen".
With digital instrument panel
Trip computer data is displayed permanently
when you select the display mode "DRIVING"
or "PERSONAL", depending on version.
In all other display modes, pressing the end of
the wiper control stalk will cause this data to
appear temporarily in a specific window.
The screen goes off completely.
F Press the screen again (anywhere on its
surface) to activate it.
F When the desired trip is displayed, press
the button on the end of the wiper control
stalk for more than 2 seconds.
Trips "1" and "2" are independent and are used
identically.
31
