Ease of use and comfort -> Rear seats for your Citroen C5 Aircross 2017-2025
Ease of use and comfort
Automatic "electrochrome" model
Rear head restraints
Never drive with passengers seated at
the rear when the head restraints are
removed; they must be in place and in the
high position.
Longitudinal adjustment
Seat operations must only be done with
the vehicle stationary.
They have two positions:
This system automatically and progressively
changes between day and night use by means
of a sensor measuring the light coming from the
rear of the vehicle.
-
a high position, for when the seat is in use:
F pull the head restraint fully up.
a low position, for stowing, when the seat
is not in use:
Each seat can be adjusted individually.
-
F press the lugs A to release the head
restraint and push it fully down.
In order to ensure optimum visibility during
your manoeuvres, the mirror lightens
automatically when reverse gear is
engaged.
The rear head restraints can be removed.
To remove a head restraint:
F pull the head restraint as far up as it will go,
F press the lugs A to release the head
restraint and remove it completely,
F stow the head restraint.
Rear seats
The 3 seats of the 2nd row are independent
and of the same width. Their backrests are
adjustable to adapt the boot load space.
To refit a head restraint:
F Raise the control and slide the seat
F insert the head restraint rods into the guides
in the corresponding seat backrest,
F push the head restraint down as far as it will
go,
forwards or backwards.
Once the backrest is folded, it is no longer
possible to slide the seat.
F press the lugs A to release the head
restraint and push it fully down.
60
Ease of use and comfort
F check that the outer seat belts are properly
tensioned along the pillars, that the central
belt is stowed and that the tongues of the
three belts are correctly in the storage
position.
F Check that the release strap 1 has correctly
returned to its position.
F Ensure that the outer seat belts are not
trapped during the operation.
Backrest angle
Several adjustment positions are possible.
Please note: an incorrectly latched
backrest compromises the safety of
passengers in the event of sudden braking
or an impact.
The contents of the boot may be thrown
forward – risk of serious injury!
3
F Move the seat forward.
F Pull the strap forward, then tilt the backrest
to the desired position.
Heating and Ventilation
Air entry
F Pull the strap 1 firmly to release the
backrest.
F Guide the backrest 2 down to the horizontal
The air circulating in the passenger
compartment is filtered and originates either
from the outside via the grille located at the
base of the windscreen, or from the inside in air
recirculation mode.
position.
Folding the backrests
Repositioning the backrests
The backrests must only be operated with
the vehicle stationary.
Before raising the backrest of the outer
seats to the normal position, please
retrieve the seat belt and hold it during the
operation.
Controls
Preliminary operations:
F lower the head restraints,
F if necessary, move the front seats forward,
F check that no person or object could
interfere with the folding of the backrests
(clothing, luggage, etc.),
The controls are accessible in the "Air
conditioning" menu of the touch screen and
are also grouped together on the control panel
of the centre console.
F Put the backrest 2 in the upright position
and push firmly to latch it home.
61





