Deutsch
EnglishDriving -> CITRON Connected CAM for your Citroen C5 Aircross 2017-2025
Driving
With the vehicle stationary, the
system is reinitialised via the
Driving/Vehicle menu of the touch
screen.
CITROËN ConnectedCAM®
(Depending on country of sale.)
Without exception, any action which the
driver takes concerning the camera must
be with the vehicle stopped.
F In this menu, select the "Driving functions"
tab.
F In the page, select the "Under-inflation
initialisation" function.
F Select "Yes" to confirm.
The reinitialisation is confirmed by the display
of a message and an audible signal.
Operation
To use all camera functions, you must perform
the following operations:
F download the "CITROËN ConnectedCAM®"
application onto a smartphone,
F pair the smartphone with the camera
following the instructions given by the
application.
Malfunction
Pairing is necessary at the first connection.
After this it will be automatic.
The default pairing code is: ConnectedCAM.
The illumination of these warning lamps
indicates a fault with the system.
A message appears, accompanied by an
audible signal.
Switching on
In this case, under-inflation monitoring of the
tyres is no longer assured.
Have the system checked by a CITROËN
dealer or a qualified workshop.
F Press and hold this button to
switch the camera on.
The indicator lamp in the button
comes on.
This camera, installed at the top of the
windscreen and connected wirelessly, allows
you to:
When the camera is switched on, video
recording is automatic and permanent.
-
-
-
take photos and videos on demand and
share them,
send the vehicle's GPS coordinates to
a smartphone,
record videos automatically in the event of
a vehicle impact.
134
Driving
Switching off
Resetting the system
Driving and manoeuvring
F Press and hold this button to
aids – General
switch the camera off.
The indicator lamp in the button
goes off.
recommendations
Pressing and holding these two buttons
simultaneously resets the system.
This action erases all data recorded in the
camera and reinitialises the camera's default
pairing code.
If you switch the camera off manually, it will
remain off even after the vehicle is restarted
and will have to be switched on manually.
Driving and manoeuvring aids cannot, in
any circumstances, replace the need for
vigilance on the part of the driver.
The driver must comply with the Highway
Code, must remain in control of the
vehicle in all circumstances and must be
able to retake control of it at all times. The
driver must adapt the speed to climactic
conditions, traffic and the state of the
road.
It is the driver's responsibility to constantly
check the traffic, to assess the relative
distances and speeds of other vehicles
and to anticipate their movements before
indicating and changing lane.
Managing photos and videos
For safety reasons, the driver must not
use the CITROËN ConnectedCAM®
application from a smartphone while
driving. He or she must perform any action
requiring sustained attention when the
vehicle is stationary.
F Press this button briefly to take
a photo.
An audible signal confirms that the request has
been acknowledged.
F Press and hold this button to
record a video.
6
Operating fault
The systems cannot exceed the limits of
the laws of physics.
A micro USB port also allows the data from the
camera to be saved onto other media such as
computers, tablets, etc.
When a system fault occurs, the
indicator lamp in the button flashes.
Thanks to the "CITROËN ConnectedCAM®"
application, you can then automatically and
immediately share your photos and videos on
social networks or by email.
An audible signal confirms that the request has
been acknowledged.
Have it checked by a CITROËN dealer or by
a qualified workshop.
Driving aids
You should hold the steering wheel with
both hands, always use the interior and
exterior rear view mirrors, always keep
your feet close to the pedals and take
a break every two hours.
135
