Deutsch
EnglishCONTROLS -> Interior equipment for your BMW X5 2018-2025
Interior equipment
CONTROLS
Interior equipment
General
Vehicle equipment
The total load of all sockets must not exceed
140 watts at 12 V.
This chapter describes equipment, systems
and functions which are offered or may be of-
fered in future on a model-specific basis, even
if they are not included in the vehicle in ques-
tion.
Do not damage the socket by using unsuitable
connectors.
Safety information
For further information:
Vehicle equipment, see page 8.
WARNING
Devices and cables, for example portable
navigation devices, that are located in the de-
ployment range of the airbags may impede
airbag deployment or be thrown around the
vehicle interior when the airbag is deployed.
There is a danger of injury. Make sure that
devices and cables are not in the deployment
range of the airbags.
Sun visor
Glare protection
Fold the sun visor downwards or upwards.
Protection from glare at the side
Folding the sun visor out
1. Fold down the sun visor.
WARNING
Battery chargers that charge the vehicle bat-
tery via sockets or cigarette lighters in the
vehicle may overload or damage the 12 V
electrical system. There is a danger of injury
or material damage. Only connect battery
chargers for the vehicle battery to the starting
aid terminals in the engine compartment.
2. Detach the sun visor from its holder and
pivot it sideways to the side window.
3. Move it back to the desired position.
Folding the sun visor in
To close the sun visor, proceed in reverse or-
der.
Vanity mirror
A vanity mirror is located behind a cover in the
sun visor.
WARNING
If metallic objects fall into the socket, they
can cause a short circuit. There is a danger
of injury or material damage. After using the
socket, re-fit the cigarette lighter or socket
cover.
Sockets
Principle
The socket can be used for electronic devi-
ces when the standby or drive-ready state is
switched on.
317
Online Edition for Part no. 01405A7D5D0 - II/23
Interior equipment
CONTROLS
Front centre console
Inside the luggage compartment
Press the cover.
There is a socket on the right side of the lug-
gage compartment. Open the cover.
USB port
General
Please comply with the notes on connecting
mobile devices to the USB port in the chapter
on USB connections.
A socket is located between the cup holders, in
one of the marked positions. Pull off the cover.
For further information:
For information on USB connection, see Own-
er’s Handbook for Navigation, Entertainment,
Communication.
Rear centre console
In the centre armrest
There is a socket in the centre console.
Pull off the cover.
There is a USB port in the centre armrest.
Properties:
▷
▷
▷
USB port type C.
For charging mobile devices.
Charge current: max. 3 A.
318
Online Edition for Part no. 01405A7D5D0 - II/23
Interior equipment
CONTROLS
In the centre console
BMW Travel & Comfort
System
NOTICE
Objects in the storage compartment, for ex-
ample large USB connectors, can block or
damage the cover on opening and closing.
There is a risk of material damage. When
opening and closing, make sure that the
movement range of the cover is kept clear.
General
USB connections and mounts for mounting
optional accessories, e.g. universal holders for
tablets or clothes hangers are located on the
backrests of the front seats.
USB port properties:
▷
▷
▷
USB port type C.
For charging mobile devices.
Charge current: maximum 3 A / 45 W per
seat.
Additional information is available from an au-
thorised Service Partner or another qualified
Service Partner or a specialist workshop.
Overview
Press the cover.
The sockets and the USB ports are located
behind the marked covers.
A USB port is located in the centre console, in
one of the marked positions.
Properties:
▷
▷
USB port type A.
For charging mobile devices and transfer-
ring data.
▷
Charge current: maximum 1.5 A.
319
Online Edition for Part no. 01405A7D5D0 - II/23
Interior equipment
CONTROLS
sure there are no objects in the tray together
with the device.
Installing optional accessories
1. Slide the cover all the way to the side.
Overview
Tray crosswise in the centre console:
2. Fit optional accessories, see installation in-
structions.
1
LED
Wireless charging tray
2
Dock surface
Principle
Tray on the left in the centre console:
The wireless charging tray allows wireless
charging of mobile phones and other mobile
devices certified according to the Qi standard.
General
When inserting the device to be charged, make
sure that there are no objects in the wireless
charging tray together with the device to be
charged.
The charging process is indicated by the
charge indicator on the control display.
1
LED
2
Dock surface
Safety information
Operating requirements
▷
The device to be charged must have been
certified according to the Qi standard.
WARNING
When charging a Qi-compatible device in the
wireless charging tray, any metal objects that
are in the tray together with the device can
become very hot. If storage media or elec-
tronic cards, for example, smart cards, cards
with magnetic strips or cards for transmitting
signals, are located in the tray together with
the device, their function may be impaired.
There is a danger of injury or material dam-
age. When charging mobile devices, make
▷
▷
Standby state is switched on.
The maximum size for a mobile phone is
approximately 154.5 x 80 x 18 mm, 6.06 x
3.1 x 0.7 in.
320
Online Edition for Part no. 01405A7D5D0 - II/23
Interior equipment
CONTROLS
▷
▷
Protective sleeves and covers must be suit-
able for wireless charging.
Enabling/disabling the forgotten
warning
The mobile phone to be charged is located
in the middle of the dock. The display of the
mobile phone faces upwards.
1.
Apps menu
2. "Vehicle apps"
3. "System settings"
4. "Wireless charging tray"
5. "Mobile phone reminder"
Inserting the mobile phone
1. Open the cover of the dock.
2. Place the mobile phone in the centre of the
dock with the display facing upwards.
System limits
The charging current may be reduced or
charging may be temporarily interrupted in the
wireless charging tray in the following situa-
tions:
3. Close the cover of the dock.
LED displays
▷
▷
▷
Due to excessive temperatures of the tray
and mobile phone.
Col-
our
Meaning
When there are objects between the mobile
phone and wireless charging tray.
Blue
The mobile phone is charging.
The blue LED stays illuminated once
the inserted Qi-compatible mobile
phone is fully charged.
If storage media or electronic cards, for
example, chip cards, cards with magnetic
strips or cards for signal transmission, are
located between the mobile phone and the
wireless charging tray.
Or-
ange
The mobile phone is not charging.
The mobile phone may be exposed
to excessively high temperature or
there may be foreign bodies in the
charging cradle.
▷
▷
By protective sleeves and covers that ex-
ceed a thickness of 2 mm, 0.07 in.
By protective sleeves and covers made
of unsuitable material, e.g. with magnetic
parts.
Red
The mobile phone is not charging.
Contact an authorised Service Part-
ner or another qualified Service Part-
ner or a specialist workshop.
▷
▷
By add-on parts on the mobile phone, e.g.
holders.
By settings on the mobile phone, for ex-
ample for charging. Follow the relevant in-
structions on the control display and in the
instructions for the mobile phone, if applica-
ble.
Forgotten phone warning
General
A warning can be issued if a mobile phone with
Qi certification has been left in the wireless
charging tray when exiting the vehicle.
The forgotten phone warning is shown in the
instrument cluster.
321
Online Edition for Part no. 01405A7D5D0 - II/23
