Deutsch
EnglishQUICK REFERENCE -> Set-up and use for your BMW X4 2019-2025
Set-up and use
QUICK REFERENCE
Set-up and use
Adjusting distance
Seats, mirrors and steering
wheel
Electrically adjustable seats
▷
▷
Back: press the button and push the head
restraint toward the rear.
Forward: pull the head restraint toward the
front.
1
Backrest width
After setting the distance, make sure that the
head restraint engages correctly.
2
3
4
Forward/backward, height, seat tilt
Backrest tilt, head restraint
Lumbar support
Adjusting the exterior mirrors
Adjusting the head restraint
Adjusting the height: manual head
restraints
1
Adjusting
2
3
Selecting a mirror, Automatic Curb Monitor
Folding in and out
▷
▷
To lower: press the button, arrow 1, and
push the head restraint down.
To raise: push the head restraint up.
20
Set-up and use
QUICK REFERENCE
Adjusting the steering wheel
Infotainment
Manual steering wheel adjustment
Radio
Buttons and functions
Depending on the country and equipment ver-
sion, the radio has the following buttons.
Button
Function
Press: turns sound output on/
off.
Turn: adjusts the volume.
1. Fold the lever down.
2. Move the steering wheel to the preferred
height and angle to suit your seat position.
Change the entertainment
source.
3. Fold the lever back up.
Memory function
Principle
The following settings can be stored and, if
necessary, retrieved using the memory func-
tion:
Press once: changes the sta-
tion/track.
/
/
Press and hold: fast for-
ward/rewind the track.
Programmable memory but-
tons.
▷
▷
▷
Seat position.
Exterior mirror position.
Height of the Head-up display.
Storing
1. Set the desired position.
Changeover of wave range/
satellite radio.
Changing the wave range.
2.
Press the button. The LED in the
button illuminates.
Menu Apps.
3. Press the desired button 1 or 2 at the
door while the LED is illuminated. A signal
sounds.
Navigation destination input
Calling up settings
Entering a destination via the search
Press the desired button 1 or 2.
1.
Press the button on the Controller.
"Where to?"
2.
3. Enter at least two letters or characters.
21
Set-up and use
QUICK REFERENCE
Select point of interest categories from the
points of interest menu as needed.
"Accept"
/
▷
The search term may be completed auto-
matically in orange lettering.
Press the corresponding button on the
steering wheel.
Tilt the Controller up to accept the sug-
gested search term.
▷
▷
Use the knurled wheel on the steering
wheel to select from the list in the instru-
ment cluster: "Accept"
4.
Select the icon, if needed.
A list of the results is displayed.
Via touchscreen: tap on the corresponding
entry on the control display.
5. If necessary, "Filter"
6. "Show results"
7. Select the desired entry.
8. If necessary, "Start guidance"
Dialing a number
1. "COM"
2. If necessary, "Telephone"
3. "Dial number:"
Using the mobile phone
4. Enter the numbers.
General information
After the mobile phone is connected once to
the vehicle, the mobile phone can be operated
using iDrive and the steering wheel buttons.
5.
Select the icon. The connection is es-
tablished via the mobile phone to which this
function has been assigned.
Establish the connection via the additional te-
lephone:
Connecting via Bluetooth®
1. "COM"
1.
Press the button.
2. "Mobile devices"
2. "Call via"
3. Tilt the Controller to the right.
4. "New device"
Apple CarPlay© preparation
Principle
CarPlay allows operation of select functions of
a compatible Apple iPhone via Siri voice con-
trol and iDrive.
5. "Phone calls and audio"
The vehicle's Bluetooth name is displayed
on the control display.
6. Compare the control number displayed on
the control display with the control number
on the display of the mobile device, and
confirm that the two match.
Functional requirements
7. A Bluetooth connection is established.
▷
Compatible iPhone: iPhone 5 or later with
iOS 9.3 or later.
The mobile device is connected to the vehicle
and displayed in the device list.
▷
▷
Corresponding mobile contract.
Bluetooth®, Wi-Fi, and Siri voice control
are turned on the iPhone.
Accepting a call
Depending on the equipment, incoming calls
can be answered in several ways.
▷
Via iDrive:
22
Set-up and use
QUICK REFERENCE
▷
▷
If necessary, the setting for mobile data
must be activated on the iPhone.
Wi-Fi and Bluetooth are enabled in the ve-
hicle.
Pairing the iPhone with CarPlay
1. "COM"
2. "Mobile devices"
3. "New device"
4. "Phone calls and audio"
The vehicle's Bluetooth name is displayed
on the control display.
5. On the mobile device, search for nearby
Bluetooth devices and select the vehicle.
A control number is displayed.
6. Compare the control number displayed on
the control display with the control number
on the display of the mobile device, and
confirm that the two match.
7. "Use Apple CarPlay"
The iPhone is connected to the vehicle and
displayed in the device list.
23
