Deutsch
EnglishCONTROLS -> Sensors of the vehicle for your BMW X3 2024-2025
Sensors of the vehicle
CONTROLS
Sensors of the vehicle
Vehicle features and options Cameras
This chapter describes model-specific equip-
Front camera
ment, systems, and functions that are currently
available, or may become available in the fu-
ture, even if they are not present in the vehicle.
Additional information:
Vehicle equipment, refer to page 8.
Overview
Depending on the equipment, the following
cameras and sensors are installed in the vehi-
cle:
The front camera is located in the radiator
grille.
▷
▷
▷
▷
▷
▷
▷
▷
Front camera.
Camera behind the windshield
Camera behind the windshield.
Exterior mirror cameras.
Rearview camera.
Front radar sensor.
Side radar sensors, front.
Side radar sensors, rear.
Ultrasonic sensors in the front/rear bump-
ers.
▷
Ultrasonic sensors at the sides.
The camera behind the windshield is located
near the interior mirror.
36
Sensors of the vehicle
CONTROLS
▷
▷
In tight curves.
Top view cameras
When the camera field of view is covered,
for instance by a fogged up windshield or
labels.
▷
▷
▷
▷
If the camera lens is dirty or damaged.
With exterior mirrors folded in.
With open doors or open cargo area.
When driving toward bright lights or strong
reflections, e.g., setting sun.
▷
▷
When it is dark outside.
One exterior mirror camera is located at the
bottom of each exterior mirror housing.
The camera has overheated due to exces-
sive temperatures and temporarily turned
off.
Rearview camera
▷
During calibration of the camera immedi-
ately after vehicle delivery.
If applicable, a Check Control message will be
displayed when the system limits are reached.
Radar sensors
Safety information
Warning
The rearview camera is located above the li-
cense-plate carrier.
The vehicle radar sensors and thus also the
driver assistance systems can be impaired by
external influences, e.g., interference. There
is a risk of accident, injury, or property dam-
age. Watch the surrounding traffic situation
closely, be ready to take over steering and
braking at any time, and actively intervene
where appropriate.
Functional requirement of the
cameras
For the cameras to function correctly, the area
around the cameras must be clean and free.
Additional information:
▷
▷
Washing the vehicle, refer to page 388.
Vehicle care, refer to page 389.
System limits of the cameras
The cameras may not work properly, e.g.,
show something that is incorrect, in the follow-
ing situations:
▷
▷
In heavy fog, wet conditions, or snowfall.
On steep hilltops or in sharp dips in the
road.
37
Sensors of the vehicle
CONTROLS
Front radar sensor
Functional requirement of the radar
sensors
For the radar sensors to function correctly, the
area around the radar sensors must be kept
clean and free.
Additional information:
▷
▷
Washing the vehicle, refer to page 388.
Vehicle care, refer to page 389.
System limits of the radar sensors
The function of the radar sensors may be re-
stricted or not available, for instance in the fol-
lowing situations:
The front radar sensor is located in the radiator
grille.
Radar sensors, side, front
▷
▷
▷
In case of dirty sensors.
In case of iced-up sensors.
If sensors are covered such as by labels,
films or a license-plate carrier.
▷
▷
▷
If the sensor is not aligned correctly, for in-
stance due to parking damage.
If the radiation range of the sensors is cov-
ered, e.g., by protruding cargo.
When the field of view of the sensors is cov-
ered, e.g., by garage walls, hedges, snow
hills, vehicles or trailers.
The radar sensors are located on the side of
the front bumper.
▷
▷
After improper paint work on the vehicle in
the area of the sensors.
Radar sensors, side, rear
On steep hilltops or in sharp dips in the
road.
If applicable, a Check Control message will be
displayed when the system limits are reached.
The radar sensors are located on the side of
the rear bumper.
38
Sensors of the vehicle
CONTROLS
Functional requirement of the
ultrasonic sensors
Ultrasonic sensors
For the ultrasonic sensors to function correctly,
the area around the ultrasonic sensors must
be kept clean and free.
Ultrasonic sensors, front
Additional information:
▷
▷
Washing the vehicle, refer to page 388.
Vehicle care, refer to page 389.
System limits of the ultrasonic
sensors
The detection of objects with ultrasonic meas-
urements can run into physical limits, e.g., in
the following situations:
The ultrasonic sensors of the parking assis-
tance systems are located in the front bumper.
▷
▷
▷
If the sensors are dirty or covered, e.g., by
stickers.
Ultrasonic sensors, rear
If the sensor is not aligned correctly, for in-
stance due to parking damage.
After improper paint work on the vehicle in
the area of the sensors.
▷
▷
▷
For small children and animals.
For people with specific clothing, e.g., coat.
With obstacles and persons at the edge of
the lane.
▷
In case of external interference with the
ultrasonics, for instance from passing ve-
hicles, loud machines or other ultrasonic
sources.
The ultrasonic sensors of the parking assis-
tance systems are located in the rear bumper.
Ultrasonic sensors, side
▷
▷
Under certain weather conditions, e.g., high
moisture, wet conditions, snowfall, cold, ex-
treme heat, or strong wind.
With tow bars and trailer hitches of other
vehicles.
▷
▷
▷
With thin or wedge-shaped objects.
With moving objects.
For elevated, protruding objects, e.g., wall
ledges.
▷
With objects with corners, edges, and
smooth surfaces.
The ultrasonic sensors for the parking assis-
tance systems are located on the sides of the
front and rear bumpers.
39
Sensors of the vehicle
CONTROLS
▷
In the case objects with fine surfaces or
structures, e.g., wire mesh fences.
▷
▷
▷
For objects with porous surfaces.
With small and low objects, e.g., boxes.
Low objects, e.g., curbs, that have already
been displayed may enter the blind area of
the sensors.
▷
With soft obstacles or obstacles covered in
foam material.
▷
▷
▷
▷
▷
With plants and bushes.
In automatic car washes.
For bumps, e.g., speed bumps.
If there are large amounts of exhaust gas.
Cargo that extends beyond the perimeter of
the vehicle is not taken into account by the
ultrasonic sensors.
▷
When the trailer hitch cover is not on
straight.
If applicable, a Check Control message will be
displayed when the system limits are reached.
40
