CONTROLS -> Operating state of the vehicle for your BMW X3 2024-2025

Operating state of the vehicle  
CONTROLS  
Operating state of the vehicle  
Operating ele-  
ment  
Function  
Vehicle features and options  
This chapter describes model-specific equip-  
ment, systems, and functions that are currently  
available, or may become available in the fu-  
ture, even if they are not present in the vehicle.  
Start/Stop button for  
turning on standby state  
or drive-ready state.  
Volume button for ac-  
tivating sleep mode  
or turning on standby  
state.  
Additional information:  
Vehicle equipment, refer to page 8.  
General information  
Depending on the situation, the vehicle will be  
in one of three operating states:  
Idle state  
Idle state.  
Principle  
Standby state.  
Drive-ready state.  
When the vehicle is in idle state, it is switched  
off.  
The vehicle is in idle state until it is opened  
from the outside or after it is exited and locked.  
Overview  
Safety information  
Warning  
An unsecured vehicle can begin to move and  
possibly roll away. There is a risk of accident,  
injury, and property damage. Before leaving  
the vehicle, secure the vehicle against rolling  
away.  
In order to ensure that the vehicle is secured  
against rolling away, follow the following:  
The operating elements for manually setting  
the operating state are located at the bottom  
of the center console.  
Set the parking brake.  
Automatic transmission: Make sure that  
selector lever position P is engaged.  
41  
Operating state of the vehicle  
CONTROLS  
On uphill grades or on downhill slopes,  
turn the front wheels in the direction of  
the curb.  
Establishing idle state when  
opening the front doors  
After a trip, the sleep mode can be established  
by opening the front doors. For this purpose,  
all passengers must exit the vehicle.  
On uphill grades or on downhill slopes,  
also secure the vehicle, for instance with  
a wheel chock.  
To activate/deactivate this function, go  
through the menu as follows: Apps menu /  
"Vehicle" / "Doors and windows" / "Lock/  
unlock" / "Turn off after opening door".  
Warning  
Unattended children or animals in the vehicle  
can cause the vehicle to move and endanger  
themselves and traffic, for example, due to  
the following actions:  
Establishing the sleep mode  
manually  
To turn on sleep mode man-  
ually, push and hold the volume  
button on the center console un-  
til all displays go out.  
Establishing standby.  
Releasing the parking brake.  
Opening and closing the doors or win-  
dows.  
Engaging selector lever position N.  
Using vehicle equipment.  
Deep sleep mode  
There is a risk of accident, injury, and prop-  
erty damage. Do not leave children or ani-  
mals unattended in the vehicle. Take the ve-  
hicle key with you when exiting and lock the  
vehicle.  
Principle  
Deep sleep mode is activated to prevent the  
vehicle battery from discharging when the ve-  
hicle is stationary for several-week periods.  
In deep sleep mode, the vehicle functions are  
limited to the essentials.  
Establishing the sleep mode  
automatically  
The vehicle switches automatically to idle state  
in situations like the following:  
General information  
When the vehicle is shut down for longer than  
three months, some special measures are nec-  
essary. For more information, contact an au-  
thorized service center or another qualified  
service center or repair shop.  
After several minutes, if no operation takes  
place on the vehicle.  
If the charge state of the vehicle battery is  
low.  
Activating/deactivating deep sleep  
mode  
1. To enable deep sleep mode, go through  
the menu as follows: Apps menu /  
"Vehicle" / "System settings" / "Deep sleep  
mode".  
Depending on the settings configured via  
iDrive, when one or both front doors are  
opened when exiting the vehicle after a  
drive.  
In some situations, the idle state is not set au-  
tomatically, for instance during a phone call or  
when the low-beam headlights are switched  
on.  
2. Select the desired setting.  
42  
Operating state of the vehicle  
CONTROLS  
Deep sleep mode deactivates automatically  
when drive-ready state is turned on.  
Using the Start/Stop button  
To manually turn on standby state  
again with the Start/Stop button, push  
the Start/Stop button on the center  
console. The control display and the instru-  
ment cluster illuminate.  
Access to the vehicle  
Display in the instrument cluster  
If OFF is displayed on the instru-  
ment cluster, drive-ready state  
is turned off and standby state is  
turned on.  
Press the button on the cargo area to access  
the vehicle while in deep sleep mode. Deep  
sleep mode remains on in this case.  
Drive-ready state  
Principle  
Turning on drive-ready state corresponds to  
starting the engine.  
Standby state  
Principle  
If standby state is activated, most functions  
can be used while the vehicle is stationary. De-  
sired settings can be applied.  
General information  
Some vehicle functions can only be used with  
the drive-ready state switched on.  
The vehicle is in standby state after the front  
doors are opened from the outside.  
Safety information  
Turning on standby state manually  
DANGER  
General information  
Standby state can be reactivated manually if  
the vehicle has been set to idle state automati-  
cally.  
If the exhaust pipe is blocked or ventilation is  
insufficient, harmful exhaust gases can pene-  
trate the vehicle. The exhaust gases contain  
pollutants which are colorless and odorless.  
In enclosed areas, exhaust gases can also  
accumulate outside of the vehicle. There is a  
danger to life. Keep the exhaust pipe free and  
ensure sufficient ventilation.  
Via the volume button  
To manually turn on standby  
state again using the volume  
button on the center console,  
push the volume button. The  
control display and the instru-  
ment cluster illuminate.  
43  
Operating state of the vehicle  
CONTROLS  
Warning  
Turning on the drive-ready state  
To turn on drive-ready state, proceed as fol-  
lows:  
An unsecured vehicle can begin to move and  
possibly roll away. There is a risk of accident,  
injury, and property damage. Before leaving  
the vehicle, secure the vehicle against rolling  
away.  
1. Depress the brake pedal.  
2. On the center console, press the Start/Stop  
button.  
The ignition is activated automatically for a  
brief time and is stopped as soon as the en-  
gine starts.  
In order to ensure that the vehicle is secured  
against rolling away, follow the following:  
Set the parking brake.  
Most of the indicator lights and warning lights  
on the instrument cluster illuminate for differ-  
ent lengths of time.  
Automatic transmission: Make sure that  
selector lever position P is engaged.  
On uphill grades or on downhill slopes,  
turn the front wheels in the direction of  
the curb.  
Gasoline engine  
The full drive power may not be available after  
the gasoline engine is started. This can take  
up to 30 seconds, depending on the engine.  
In this case, the vehicle will not accelerate as  
usual.  
On uphill grades or on downhill slopes,  
also secure the vehicle, for instance with  
a wheel chock.  
Additional information:  
NOTICE  
Power gauge, refer to page 143.  
Repeatedly attempting to start the engine or  
repeatedly starting the vehicle in rapid suc-  
cession can cause the starter to overheat.  
This also results in unburned or inadequately  
burned fuel, and can cause the catalytic con-  
verter to overheat. There is a risk of property  
damage. Avoid repeated starting of the vehi-  
cle, particularly repeated starting in rapid suc-  
cession.  
Display in the instrument cluster  
If READY is displayed in the in-  
strument cluster, the Auto Start/  
Stop function is ready to start  
the engine automatically.  
Information on the other displays on the instru-  
ment cluster is provided in the “Displayssec-  
tion.  
Turning on the drive-ready state  
Additional information:  
Instrument cluster, refer to page 47.  
General information  
Drive-ready state is turned on/off us-  
ing the Start/Stop button on the center  
console.  
Turning off drive-ready state  
1. When the vehicle is stationary, press the  
brake.  
2. Engage the parking brake.  
3. Press the Start/Stop button on the center  
console.  
44  
Operating state of the vehicle  
CONTROLS  
The READY indicator goes out and a signal  
tone sounds.  
The drive-ready state is switched off automat-  
ically if the driver's seat belt is not buckled  
when the driver's door is opened.  
45