Deutsch
EnglishCONTROLS -> Interior equipment for your BMW X3 2024-2025
Interior equipment
CONTROLS
Interior equipment
risk of property damage. Make sure that the
travel path of the respective system is clear
during programming and operation. Also fol-
low the safety information for the hand-held
transmitter.
Vehicle features and options
This chapter describes model-specific equip-
ment, systems, and functions that are currently
available, or may become available in the fu-
ture, even if they are not present in the vehicle.
Additional information:
Compatibility
Vehicle equipment, refer to page 8.
If this icon is printed on the packaging
or in the operating instructions for the
remote-controlled system, the system
is generally compatible with the integrated uni-
versal remote control.
Integrated universal remote
control
Additional questions are answered by:
Principle
▷
An authorized service center or another
qualified service center or repair shop.
The integrated universal remote control in the
interior mirror can operate remote-controlled
systems such as garage door openers, alarm
systems or locking systems.
▷
HomeLink is a registered trademark of Gentex
Corporation.
For any additional questions, contact an au-
thorized service center or another qualified
service center or repair shop.
General information
The integrated universal remote control re-
places up to three different hand-held trans-
mitters. To operate the remote control, the
buttons on the interior mirror must be pro-
grammed with the desired functions.
Operating elements on the interior
mirror
The operating elements on the interior mirror
consist of the following elements:
Before selling the vehicle, delete any saved
functions for security purposes.
If possible, do not install the antenna of the
remote-controlled system near metal objects
to ensure the best possible operation.
Safety information
Warning
The operation of remote-controlled systems
with the integrated universal remote control
such as the garage door may result in injury,
for example, body parts becoming jammed in
a garage door. There is a risk of injury and
285
Interior equipment
CONTROLS
The required distance depends on the
hand-held transmitter.
5. Press and hold the button on the hand-held
transmitter.
Canada: if programming with the hand-held
transmitter was interrupted, hold down the
interior mirror button and repeatedly press
and release the hand-held transmitter but-
ton for 2 seconds.
▷
▷
▷
Buttons, arrow 1.
LED, arrow 2.
6. The LED can illuminate in different ways:
▷
The LED illuminates green when the
programming is complete.
Hand-held transmitter for remote-control-
led system, arrow 3.
Release the button.
▷
The LED flashes green rapidly when the
hand-held transmitter was detected but
the programming is not complete.
Programming the integrated
universal remote control
Press and hold the button on the interior
mirror for approx. 2 seconds. Perform
this procedure three times.
Functional requirement
The battery of the hand-held transmitter must
be fully charged at the time of programming
to ensure an optimal range of the integrated
universal remote control.
If the integrated universal remote con-
trol remains nonoperational, continue
with the special features for rolling code
radio systems.
Programming individual buttons
1. To program individual buttons, park the ve-
hicle within range of the remote-controlled
system.
▷
The LED does not illuminate green after
60 seconds if the programming could
not be completed.
Repeat steps 3 to 5.
2. Activate standby state.
Special feature of the rolling code
wireless system
For systems with a rolling code radio system,
the integrated universal remote control and the
system also have to be synchronized.
3. Select desired button on interior mirror:
▷
Program an available button:
Press the button.
▷
Program a button that is already in use:
Press and hold the button for approx.
20 seconds.
Refer to information on synchronization in the
operating instructions for the remote-control-
led system.
The LED on the interior mirror will slowly
begin flashing orange.
1. Program the desired button on the interior
mirror.
4. Hold the hand-held transmitter for the
remote-controlled system approx. 1 to
12 in/2.5 to 30 cm away from the buttons
on the interior mirror.
2. Locate and press the synchronize button
on the remote-controlled system, e.g., a
garage door.
286
Interior equipment
CONTROLS
You have approx. 30 seconds for the next
step.
Glare shield from the side
Synchronizing is easier with the aid of a
second person.
Folding the sun visor out
To prevent glare from the side window, pro-
ceed as follows:
3. Press and hold the programmed button on
the interior mirror for approx. 3 seconds.
1. Fold down the sun visor.
If necessary, repeat this step up to three
times in order to end synchronization. Once
synchronization is complete, the program-
med function will be carried out.
2. Detach the sun visor from its mount and
swing it toward the side window.
Folding the sun visor in
Proceed in the reverse order to close the sun
visor.
Operation
After programming, the remote-controlled sys-
tem can be operated with the button on the
interior mirror.
Vanity mirror
A vanity mirror is located in the sun visor be-
hind a cover.
Press and hold the desired button for the re-
mote-controlled system within range until the
function is started.
The LED on the interior mirror is continuously
illuminated green during the transmission of
the radio signal.
Sockets
Principle
The socket can be used for electronic devi-
ces when the standby or drive-ready state is
switched on.
Deleting a button assignment
The button assignment cannot be deleted indi-
vidually.
Press and hold the two outer buttons on
the interior mirror simultaneously for approxi-
mately 10 seconds until the LED flashes green
rapidly.
General information
The total load of all sockets must not exceed
140 watts at 12 volts.
Do not damage the socket by using unsuitable
connectors.
All stored button assignments will be deleted.
Sun visor
Safety information
Glare shield
Warning
To protect against glare, fold the sun visor up
or down.
Devices and cables in the unfolding area of
the airbags such as portable navigation devi-
ces can hinder the unfolding of the airbag or
be thrown around in the car's interior while
unfolding. There is a risk of injury and risk
of property damage. Make sure that devices
287
Interior equipment
CONTROLS
and cables are not in the airbag's area of
unfolding.
In the cargo area
Warning
Battery chargers that charge the vehicle bat-
tery via sockets or cigarette lighters in the
vehicle may overload or damage the 12 V
electrical system. There is a risk of injury
and risk of property damage. Only connect
battery chargers for the vehicle battery to the
jump-start terminals in the engine compart-
ment.
A socket is provided on the right side of the
cargo area under a cover. Open the cover be-
fore using the socket.
Warning
USB port
If metal objects fall or are plugged into elec-
tronic interfaces, e.g., sockets or USB ports,
these objects can cause a short circuit and
destroy the interface. There is a risk of injury
and risk of property damage. Make sure to
prevent metal objects from falling or being
plugged into electronic interfaces. Insert the
cigarette lighter or socket cover again after
using the socket.
Principle
The USB port is an interface used to connect
mobile devices to the vehicle via USB cable.
When connected, data can be sent or the mo-
bile device can be charged.
General information
Follow the information regarding the connec-
tion of mobile devices to the USB port in the
section on USB connections.
Front center armrest
Additional information:
USB connection, see Owner's Manual for Nav-
igation, Entertainment, Communication;
Safety information
Warning
If metal objects fall or are plugged into elec-
tronic interfaces, e.g., sockets or USB ports,
these objects can cause a short circuit and
destroy the interface. There is a risk of injury
and risk of property damage. Make sure to
prevent metal objects from falling or being
plugged into electronic interfaces. Insert the
A socket is provided in the front center armrest
under a cover. Pull off the cover before using
the socket.
288
Interior equipment
CONTROLS
cigarette lighter or socket cover again after
using the socket.
BMW Travel & Comfort
System
Front center console
Principle
The BMW Travel & Comfort system provides
mounts for special accessories, e.g., universal
holders for tablets or clothes hangers. The
BMW Travel & Comfort system is located on
the front seat backrests.
For more information, contact an authorized
service center or another qualified service cen-
ter or repair shop.
Two USB ports are located on the front center
console.
Overview
These USB ports have the following character-
istics:
▷
▷
USB port Type C.
For charging mobile devices and for data
transfer.
▷
▷
For charging mobile devices.
Charge current: maximum 3 A per port.
The mounts are located on the front seat back-
rests, behind the marked covers.
Rear center console
Installing optional accessories
1. To attach optional accessories, push the
cover on the front seat backrest all the way
to the side.
Two USB ports are located in the rear center
console.
These USB ports have the following character-
istics:
▷
▷
▷
USB port Type C.
For charging mobile devices.
Charge current: maximum 3 A per port.
2. When installing optional accessories, refer
to the assembly instructions.
289
Interior equipment
CONTROLS
Wireless charging tray
Principle
The wireless charging tray is used to wirelessly
charge Qi-certified smartphones.
General information
Quick charging functions are supported de-
pending on the smartphone.
1
Storage area
Fan
2
The integrated fan cools the smartphone being
charged.
When inserting the smartphone to be charged,
make sure that there is nothing between the
smartphone to be charged and the wireless
charging tray.
Functional requirements
The following functional requirements apply for
the wireless charging tray:
▷
The smartphone to be charged must be Qi-
certified.
The charging process is shown by the
charge indicator on the control display.
▷
▷
▷
Standby state is switched on.
The charging function is on.
Safety information
The smartphone cannot exceed maximum
dimensions of approx. 6.69 x 3.34 x
0.7 in/170 x 85 x 18 mm.
Warning
When charging a Qi-compatible device in the
wireless charging tray, any metal objects on
the tray together with the device can become
very hot. Storage media or electronic cards,
e.g., chip cards, cards with magnetic strips, or
cards for transmitting signals, may not func-
tion correctly when placed together on the
tray with the device. There is a risk of injury
and risk of property damage. When charging
mobile devices, make sure there are no ob-
jects on the tray together with the device.
▷
▷
Protective sleeves and covers must be suit-
able for wireless charging.
Place the smartphone to be charged up-
right in the center of the tray on the driver's
side. The smartphone display is facing up.
Activating/deactivating charging
To activate/deactivate charging, go through
the menu as follows: Apps menu / "Vehicle" /
"System settings" / "Wireless charging tray" /
"Wireless charging".
Overview
Tray in the center console:
Inserting a smartphone
Place the smartphone upright in the middle of
the tray on the driver's side, with the display
facing up.
290
Interior equipment
CONTROLS
Forgotten warning
Interior camera
General information
A warning may be issued if a Qi-certified
smartphone was forgotten in the wireless
charging tray when leaving the vehicle.
Principle
The interior camera can be used to record the
vehicle interior.
Prior to the first use of the interior camera,
the recording function and, if necessary, data
transfer must be activated. To do this, confirm
the query on the control display. Additional
activation may be required for some system
functions.
The forgotten warning is displayed in the in-
strument cluster.
Enable/Disable Forgotten Warning
To activate/deactivate the Forgotten Warning,
go through the menu as follows: Apps menu /
"Vehicle" / "System settings" / "Wireless
charging tray" / "Mobile phone reminder".
Two infrared light sources next to the camera
lens illuminate while the interior camera is ac-
tive. Infrared light sources may be visible, de-
pending on lighting conditions.
System limits
The charge current may be reduced or charg-
ing may be temporarily interrupted in the wire-
less charging tray in the following situations:
The interior camera can provide the following
functions:
▷
Interior camera.
Media can be recorded, saved, and played.
Remote Inside View.
▷
▷
▷
Due to excessive temperatures on the tray
and smartphone.
▷
The vehicle interior can be recorded using
the My BMW App.
If there are objects between the smart-
phone and wireless charging tray.
▷
Anti-theft recorder.
If storage media or electronic cards,
e.g., chip cards, cards with magnetic
stripes, or cards for signal transmission, are
located between the smartphone and wire-
less charging tray.
If the alarm system is triggered, the vehicle
interior is automatically recorded. Record-
ings can also be played using the My BMW
App.
▷
▷
Due to protective sleeves and covers that
exceed a thickness of 0.07 in/2 mm
Follow applicable legal requirements when us-
ing this system.
Due to protective sleeves and covers made
of unsuitable material, e.g., with magnetic
parts.
Data protection
General information
▷
▷
Due to add-on parts for the smartphone,
e.g., holders.
The permissibility of making and evaluating re-
cordings for the interior camera depends on
the applicable regulations of the country in
which the system is to be used. The user is
responsible for the use of the system and com-
pliance with the respective regulations.
By configuring the smartphone settings,
e.g., for charging. Follow the instructions
given on the control display and smart-
phone, as applicable.
The vehicle manufacturer recommends that
you verify there are no statutory or regulatory
restrictions on using the system in your region
291
Interior equipment
CONTROLS
or country prior to initial use. In addition, the
laws with respect to use of the system should
be verified in regular intervals, especially when
borders are frequently crossed.
This system analyzes the vehicle interior to
detect which seats are occupied. No media re-
cordings are made in the process.
Overview
Other users and occupants of the vehicle must
be informed about the system. In addition, in-
formation about the system is required when
handing off the vehicle.
Data transfer and data storage
Whether recording data will be sent or stored
depends on the recording function.
The following applies for the interior camera
function:
The interior camera is located in the headliner.
Additional information:
▷
Data is sent to a mobile device. It must be
possible to connect to the vehicle over Wi-
Fi.
Around the headliner, refer to page 35.
▷
Data is saved to the vehicle and assigned
to the BMW ID or driver profile.
Functional requirements
The following functional requirements apply for
the interior camera function:
The following applies for Remote Inside View:
▷
Data is sent to mobile devices via the My
BMW App. A connection to the Connected-
Drive account is required.
▷
▷
The Privacy Policy has been accepted.
The camera is activated.
▷
Data is saved to the My BMW App and,
after data is sent, to the mobile device.
When sending recordings to mobile devices,
the following functional requirements apply:
The following applies for the Anti-Theft Re-
corder:
▷
▷
Data transfer is activated.
A mobile device is connected to the vehicle
via Wi-Fi.
▷
Data is sent to mobile devices via the My
BMW App. A connection to the Connected-
Drive account is required.
The following functional requirements apply
for the Remote Inside View and Anti-Theft Re-
corder functions:
▷
Data is saved to the vehicle and, after data
is sent, to the mobile device.
▷
▷
The Privacy Policy has been accepted.
More information on the scope and content of
data processing is available online in the Con-
nectedDrive privacy notices or service descrip-
tions.
The My BMW App is installed on the mobile
device.
▷
The My BMW App is linked to the Connect-
edDrive account.
Occupying the seats
The interior camera is also used to detect oc-
cupied seats.
▷
▷
The vehicle is parked and locked.
The Anti-Theft Recorder can only be used if
vehicle is equipped with an alarm system.
The interior camera turns on automatically at
regular intervals when all doors are closed.
292
Interior equipment
CONTROLS
Ensure that the faces of occupants are visible
and are not partially or completely covered, for
instance by face masks.
For burst shots, the series of pictures will be
displayed as a preview.
Recording video
Additional information:
Videos can be recorded as follows:
Data protection, refer to page 66.
1. Go through the menu as follows: Apps
menu / "All" / "Interior camera" / "Camera".
Activating/deactivating interior
camera
The interior camera can record and send data
when activated, then be deactivated.
2. Select the recording mode for video record-
ing.
3. Start the video recording.
1. Go through the menu as follows: Apps
menu / "All" / "Interior camera" / "Settings".
You can only record video for a certain time.
Displaying and managing
recordings
Saved recordings can be played, sent, and de-
leted in the vehicle.
2. Select the desired setting.
Interior camera
Recording mode
With some national-market versions, record-
ings are only shown on the control display
when the vehicle speed is less than approx.
2 mph/3 km/h for safety reasons.
Recording
mode
Function
"Single
photo"
Shortly after triggering, a
photo will be taken.
1. Go through the menu as follows: Apps
menu / "All" / "Interior camera" / "Gallery".
"Smile"
When the system detects a
smile, a picture will be taken.
2. Select the desired recording.
3. Select the desired setting.
Scan the QR code shown on the control dis-
play to send recordings to a mobile device.
The recording is transferred when the pop-up
on the mobile device is opened. The mobile
device must be connected to the vehicle via
WLAN.
"Self-timer
(3 sec.)"
After the timer has expired, a
photo will be taken.
"Burst
mode"
Shortly after triggering, a ser-
ies of pictures will be taken.
Take picture
Settings
A photo can be taken as follows:
1. To configure the settings for the interior
camera, go through the menu as follows:
Apps menu / "All" / "Interior camera" /
"Settings".
1. Go through the menu as follows: Apps
menu / "All" / "Interior camera" / "Camera".
2. Select the desired recording mode.
3. Trigger a photo.
2. Select the desired setting.
Depending on the recording mode selected,
photos are taken shortly after being triggered,
when a smile is detected, or when the timer
elapses.
Remote Inside View
With Remote Inside View, recordings of the ve-
hicle interior can be played on a mobile device
293
Interior equipment
CONTROLS
using the My BMW App. The vehicle interior
can be checked, e.g., for forgotten items.
The function is not suitable for monitoring peo-
ple or animals left behind.
Anti-theft recorder
The Anti-Theft Recorder automatically records
the vehicle interior when the alarm system is
triggered. The My BMW App issues a notifica-
tion when recordings are being taken. The re-
cording can be shown on a mobile device.
Up to three recordings can be saved to the
vehicle and synchronized with the My BMW
App. If the vehicle is reset to factory settings,
recordings saved to the vehicle are deleted.
294
