Vehicle care -> Steam-jet cleaner and high pressure cleaner for your BMW i5 2023-2025

Vehicle care  
MOBILITY  
Vehicle care  
Vehicle features and options  
NOTICE  
When washing with an open charging socket  
flap, the charging socket can be damaged.  
There is a risk of damage to property. Close  
the charging socket flap before washing.  
Clean dirt behind the charging socket flap  
with a cloth.  
This chapter describes model-specific equip-  
ment, systems, and functions that are currently  
available, or may become available in the fu-  
ture, even if they are not present in the vehicle.  
Additional information:  
Vehicle equipment, refer to page 8.  
Steam-jet cleaner and high  
pressure cleaner  
Washing the vehicle  
General information  
Regularly remove foreign objects such as  
leaves or snow in the area below the wind-  
shield.  
Safety information  
NOTICE  
When cleaning with high pressure cleaners,  
components can be damaged due to the  
pressure or temperatures being too high.  
There is a risk of damage to property. Main-  
tain sufficient distance and do not spray too  
long continuously. Follow the operating in-  
structions for the high pressure cleaners.  
Wash the vehicle frequently, particularly in win-  
ter. Intense contamination and road salt can  
damage the vehicle.  
Additional information:  
Fold-out position of the wipers, refer to  
page 175.  
Safety information  
Distances and temperature  
Maximum temperature: 140 /60 ℃.  
Warning  
Minimum distance from sensors, cameras,  
seals and lights: 12 inches/30 cm.  
Contact with live components can lead to an  
electric shock. High voltage is present at the  
charging connection. There is a risk of injury  
or danger to life.  
Minimum distance from glass sunroof:  
31.5 in/80 cm.  
It is recommended that work on the charg-  
ing connection, for example cleaning, is per-  
formed by an authorized service center or an-  
other qualified service center or repair shop.  
376  
Online Edition for Part no. 01405B37D97 - II/24  
Vehicle care  
MOBILITY  
In a car wash, the vehicle must be able to roll  
freely.  
Automatic car washes or car  
washes  
Some car washes do not permit persons in the  
vehicle. The vehicle cannot be locked from the  
outside when in selector lever position N. A  
signal sounds when an attempt is made to lock  
the vehicle.  
Safety information  
NOTICE  
Improper use of automatic car washes can  
cause damage to the vehicle. There is a risk  
of damage to property. Follow the following  
instructions:  
Additional information:  
Rolling or pushing the vehicle, refer to  
page 131.  
Give preference to cloth car washes or  
those that use soft brushes in order to  
avoid paint damage.  
Driving out of a car wash  
Ensure that the vehicle key is in the car.  
Turn on drive-ready state.  
Note the permissible vehicle dimensions  
for the car wash.  
Additional information:  
Drive-ready state, refer to page 46.  
Do not drive through a car wash with  
guide rails higher than 4 in/10 cm to  
avoid damage to the body.  
Lights  
Observe the tire width of the guide rail to  
avoid damage to tires and rims.  
Do not rub wet lights dry and do not use  
abrasive or acidic cleaning agents or cleaning  
agents containing alcohol.  
Fold in exterior mirrors to avoid damage  
to the exterior mirrors.  
Soak areas that have been dirtied, for instance  
from insects, with auto shampoo and wash off  
with water.  
Deactivate the wiper and, if necessary,  
rain sensor to avoid damage to the win-  
dow wiper system.  
Thaw ice with de-icing spray; do not use an ice  
scraper.  
Do not activate camera cleaning via  
iDrive while washing the vehicle to pre-  
vent damage on the cleaning system.  
After washing the vehicle  
After washing the vehicle, apply the brakes  
briefly to dry them. Otherwise, their braking  
effect may be reduced. The heat generated  
while braking dries brake disks and brake pads  
and protects them against corrosion.  
Take off all removable attachments, e.g.,  
antennas.  
Driving into a car wash  
Completely remove all residues on the win-  
dows to minimize loss of visibility due to  
smearing and to reduce wiper noises and  
wiper blade wear.  
NOTICE  
Selector lever position P is automatically en-  
gaged when standby state is switched off.  
The wheels are blocked. There is a risk  
of damage to property. Do not switch off  
standby if the vehicle is meant to coast, e.g.,  
in a car wash.  
377  
Online Edition for Part no. 01405B37D97 - II/24