Transporting children safely -> LATCH child restraint system for your BMW i5 2023-2025

Transporting children safely  
CONTROLS  
are deactivated and that the PASSENGER  
AIRBAG OFF indicator light illuminates.  
Child seat security  
Before installing a child restraint system in the  
front passenger seat, make sure that the front,  
knee and side airbags on the passenger's side  
are deactivated.  
Additional information:  
For automatic deactivation of front passenger  
airbags, refer to page 178.  
The seat belts in the rear and the front pass-  
enger seat belt can be permanently locked to  
fasten child restraint systems.  
Seat position and height  
After mounting a child restraint system, move  
the front passenger seat as far back as it will  
go and, if possible, to the lowest position. This  
seat position and height ensure the best pos-  
sible position for the belt and offers optimal  
protection in the event of an accident.  
Locking the seat belt  
1. Pull out the seat belt strap completely.  
2. Secure the child restraint system with the  
seat belt.  
After mounting a universal child restraint sys-  
tem, adjust the tilt of the seat backrest so that  
the belt is not constrained.  
3. Allow the seat belt strap to be pulled in  
and pull it tight against the child restraint  
system. The seat belt is disabled.  
If the upper attachment point of the seat belt  
is located in front of the seat belt guide of the  
child seat, move the front passenger seat care-  
fully forward until the best possible seat belt  
guide position is reached.  
Unlocking the seat belt  
1. Unbuckle the seat belt buckle.  
2. Remove the child restraint system.  
3. Allow the seat belt strap to be pulled in  
completely.  
Backrest width  
Adjustable backrest width: Before installing a  
child restraint system on the front passenger  
seat, open the backrest width completely. Do  
not change the backrest width again and do  
not call up a memory position.  
LATCH child restraint  
system  
General information  
LATCH: Lower Anchors and Tether for Chil-  
dren.  
Pay attention to the specifications, operating  
tips and safety instructions from the child re-  
straint system manufacturer when selecting,  
installing, and using LATCH child restraint sys-  
tems.  
124  
Online Edition for Part no. 01405B37D97 - II/24  
Transporting children safely  
CONTROLS  
Position  
Mounts for lower anchors  
Icon  
Meaning  
General information  
The lower anchors may be used to attach the  
CRS to the vehicle seat up to a combined child  
and CRS weight of 65 lbs/30 kg when the child  
is restrained by the internal harnesses.  
The corresponding icon shows  
the mounts for the lower  
LATCH anchors.  
Seats equipped with lower an-  
chors are marked with a pair  
(2) of LATCH icons.  
Safety information  
For vehicles equipped with a  
middle seat:  
Warning  
If the lower anchors on child restraint system  
are not engaged correctly, the child restraint  
system will not be able to provide suitable  
protection. There is a risk of injury or danger  
to life. Make sure that the lower anchors are  
correctly engaged and that the child restraint  
system fits securely against the backrest.  
It is not recommended to use  
the inner lower anchors of  
standard outer LATCH posi-  
tions to fasten a child restraint  
system on the middle seat.  
Use the vehicle seat belt in-  
stead for the middle seat.  
Before attaching child restraint  
systems  
Pull the seat belt away from the area of the  
child seat mountings.  
Warning  
The mounts for the lower anchors and at-  
tachment points of the child restraint system  
are intended for attaching child restraint sys-  
tems only. If other objects are attached, the  
mounts or attachment points can be dam-  
aged. There is a risk of injury or risk of dam-  
age to property. Only attach child restraint  
systems at the corresponding mounts for the  
lower anchors or attachment points.  
Installing child restraint systems  
1. Mount child restraint system, see manufac-  
turer's information.  
2. Make sure that the child restraint system  
mount is correctly engaged in the lower an-  
chor on both sides.  
Child restraint systems with  
tether strap  
General information  
When attaching child restraint systems to the  
upper attachment points, observe the specifi-  
cations and the operating and safety informa-  
tion of the child restraint system manufacturer.  
125  
Online Edition for Part no. 01405B37D97 - II/24