Deutsch
EnglishSafety -> Side collision mitigation for your BMW i5 2023-2025
Safety
CONTROLS
▷
▷
If the camera is impaired.
Functional requirement
The camera behind the windshield determines
the lane boundary positions.
Up to 10 seconds after turning on drive-
ready state using the Start/Stop button.
A Check Control message may be displayed
when the system is limited. A yellow warning
light also illuminates, depending on national-
market version.
The camera must detect the lane markings for
the side collision mitigation with steering inter-
vention to be active.
Sensors
The system is controlled by the following sen-
sors:
Side collision mitigation
▷
▷
▷
Camera behind the windshield.
Radar sensors, side, front.
Radar sensors, side, rear.
Principle
The side-collision warning helps to avoid an
impending side collision.
Turning the side collision warning
on/off
General information
1.
Apps menu
2. "Vehicle"
3. "Driving settings"
4. "Driver Assistance"
5. "Safety and warnings"
6. "Side collision warning"
7. Select the desired setting.
Radar sensors monitor the space next to the
vehicle when traveling faster than a minimum
speed and up to approx. 130 mph/210 km/h.
Setting the intensity of the steering
wheel vibration
1.
Apps menu
The minimum speed is country-specific and
displayed on the control display.
2. "Vehicle"
If, for example, another vehicle is detected next
to your vehicle and there is a risk of collision
with this vehicle, the system helps avoid a col-
lision. For this purpose, the system issues a
warning with a flashing LED in the exterior mir-
ror, a Check Control message and a vibrating
steering wheel. If necessary, an active steering
intervention is performed by the system.
3. "Driving settings"
4. "Driver Assistance"
5. "Feedback via steering wheel"
6. "Vibration intensity"
7. Select the desired setting.
The setting is applied to all collision warning
systems.
Safety information
Follow the safety information in the "Forward
Collision Mitigation" chapter.
Display in the instrument cluster
Depending on vehicle equipment and national-
market version, information for the system is
198
Online Edition for Part no. 01405B37D97 - II/24
Safety
CONTROLS
displayed in the Assisted View of the instru-
ment cluster.
Functional limitations
The system may be limited in the following
situations:
Additional information:
Assisted View, refer to page 159.
▷
▷
In tight corners or on narrow roads.
In the event of missing, worn, poorly visible,
merging, diverging, or multiple lane boun-
daries such as in construction areas.
Warning function
Warning light in exterior mirror
▷
With lane boundaries that are covered in
snow, ice, dirt or water.
▷
▷
With lane boundaries that are not white.
With lane boundaries that are covered by
objects.
▷
▷
When driving very close to the vehicle in
front of you.
Up to 10 seconds after turning on drive-
ready state using the Start/Stop button.
A Check Control message may be displayed
when the system is limited.
The warning light in the exterior mirror warns
of a possible collision with a detected vehicle.
Acute warning
If there is a risk of collision, the warning light
in the exterior mirror flashes and the steering
wheel starts vibrating.
Rear-end collision
preparation
Principle
A Check Control message is displayed at the
same time.
Depending on the equipment and national-
market version, the rear-end collision prepara-
tion can react to vehicles approaching from be-
hind.
Steering intervention
Depending on the national-market version,
if necessary, the system engages the active
steering intervention to prevent a collision and
maintain the vehicle within its own lane. The
steering intervention can be noticed on the
steering wheel and can be manually overrid-
den at any time.
General information
System limits
General information
Follow the system limits in the "Collision warn-
ing systems" chapter.
Radar sensors monitor the area behind the ve-
hicle.
199
Online Edition for Part no. 01405B37D97 - II/24
