Safety -> No Turn on Red function for your BMW i5 2023-2025

Safety  
CONTROLS  
To do so, this function analyzes traffic lights  
and traffic signs using the camera behind the  
windshield. In addition, the navigation system  
data is used.  
System limits  
General information  
Follow the system limits in the "Collision warn-  
ing systems" chapter.  
Safety information  
Follow the safety information in the "Forward  
Collision Mitigation" chapter.  
No warning  
For example, the system does not issue a  
warnings for road layouts without traffic signs.  
Functional requirements  
The system detects the right-of-way situa-  
tion ahead by analyzing traffic lights and  
traffic signs.  
Functional limitations  
The function may be limited in the following  
situations, for instance, and will either output  
an incorrect wrong way warning or no warning  
at all:  
Vehicle is less than approx. 164 ft/50 m  
from the traffic lights.  
Depending on vehicle equipment: the Traf-  
fic Light And Sign Warning is turned on.  
When the signage is not clear.  
If the traffic signs are fully or partially con-  
cealed or soiled.  
Sensors  
If the traffic signs are poorly legible or ro-  
tated.  
The system is controlled by a camera behind  
the windshield.  
If the traffic signs are too small or too large.  
If the traffic signs do not correspond to the  
standard.  
Display in the instrument cluster  
If the driver approaches a red traffic  
light with a traffic sign that prohibits  
a turn on red, an indicator light is dis-  
played on the instrument cluster.  
When traffic signs are detected that apply  
to a junction or parallel street.  
In the presence of country-specific road  
signs or road layouts.  
The indicator light goes out automatically after  
you drive off at a speed greater than approx.  
9 mph/15 km/h.  
Up to 10 seconds after turning on drive-  
ready state using the Start/Stop button.  
In the case of navigation data that is inva-  
lid, outdated or not available.  
System limits  
It may not be possible to use the system in  
all regions.  
General information  
Follow the system limits in the "Collision warn-  
ing systems" chapter.  
No Turn on Red function  
Functional limitations  
The system may be limited in the following  
situations:  
Principle  
This function provides assistance to the driver  
at traffic lights where turning on red is prohib-  
ited.  
203  
Online Edition for Part no. 01405B37D97 - II/24  
Safety  
CONTROLS  
If road signs or light signal systems are un-  
clear.  
sure that the driver is rested and alert. Adjust  
driving style to traffic conditions.  
If traffic signs or light signal systems are  
fully or partially concealed or soiled.  
Functional requirements  
If traffic signs or light signal systems are  
difficult to read or rotated.  
The Emergency Stop Assistant is activated  
via iDrive.  
If traffic signs or light signal systems are  
too small or too large.  
The system is activated from a speed of  
approx. 43 mph/70 km/h.  
If the traffic signs do not correspond to the  
standard.  
The Driver Attention Camera detects driver  
activity.  
With intersections with flashing light signal  
systems.  
Triggering the Emergency Stop  
Assistant  
If the system detects that the driver is no  
longer driving the vehicle safely or ignores  
warnings, the Emergency Stop Assistant is  
triggered automatically. The triggered system  
is displayed in the instrument cluster.  
In the case of navigation data that is inva-  
lid, outdated or not available.  
In some regions, this function may not be  
completely available or not available at all.  
Emergency Stop Assistant  
The Emergency Stop Assistant can also be  
triggered via voice input.  
Principle  
Additional information:  
If the driver can no longer drive the vehicle  
safely, the Emergency Stop Assistant helps to  
bring the vehicle to a safe standstill.  
BMW Intelligent Personal Assistant, refer to  
page 58.  
An immediate emergency call can be triggered  
on the control display.  
General information  
The Emergency Stop Assistant is triggered au-  
tomatically.  
The following is performed automatically when  
the Emergency Stop Assistant is triggered:  
A display is shown on the instrument clus-  
ter.  
When the system is triggered, the vehicle is  
brought to a standstill in its own lane by use of  
lane keeping.  
The system takes over vehicle handling un-  
til the vehicle comes to a standstill.  
Safety information  
The hazard warning system is switched on.  
An emergency call is triggered when sta-  
tionary, depending on vehicle equipment.  
Warning  
The system cannot serve as a substitute for  
the driver’s personal judgment in assessing  
one's physical state. An increasing lack of  
alertness or fatigue may not be detected or  
not be detected in time. There is a risk of  
accident, injury, or property damage. Make  
Activating/deactivating Emergency  
Stop Assistant  
1.  
Apps menu  
2. "Vehicle"  
3. "Driving settings"  
204  
Online Edition for Part no. 01405B37D97 - II/24