Deutsch
EnglishParking -> Rearview camera for your BMW i5 2023-2025
Parking
CONTROLS
System limits
Rearview camera
Safety information
Principle
The rearview camera helps when reverse
parking and maneuvering. The area behind the
vehicle is shown on the control display.
Warning
Because of system limitations, this system
may either not respond, or respond too late,
incorrectly, or without cause. There is a risk
of accident, injury, or property damage. Ac-
tively intervene as warranted. Refer to the in-
formation in this Owner’s Manual regarding
the scope of the system’s operation and limi-
tations.
Additional views can be shown on the display,
e.g., parking aid lines and obstacle markings.
General information
Follow the information in the "Parking assis-
tance systems" chapter.
Functional requirements
System limits of the sensors
Additional information:
▷
The trunk is fully closed.
▷
The camera area is clean and clear.
Sensors of the vehicle, refer to page 40.
Turning the rearview camera on/off
Field of view
Turning the camera view on
automatically
Because of the camera angle, the areas under
the vehicle cannot be viewed by the cameras.
When drive-ready state is switched on, the
rearview camera is automatically switched on
if selector lever position R is engaged.
Detection of objects
Very low obstacles as well as high, protruding
objects such as ledges may not be detected by
the system.
Turning the camera view off
automatically
The rearview camera turns off automatically
when driving forward or when a certain dis-
tance or speed is exceeded.
Objects shown on the control display may be
closer than they appear. Do not estimate the
distance to the objects on the control display.
The camera's detection range can be limited
by protruding cargo or a rear carrier.
Turning the camera view on/off
manually
Malfunction
A camera failure is displayed on the control
display.
1.
Press the button.
The malfunctioning camera's detection range
is shown by the shaded area on the control
display.
2. Engage selector lever position R.
Depending on vehicle equipment: The
icon in the selection window is selected au-
tomatically.
251
Online Edition for Part no. 01405B37D97 - II/24
Parking
CONTROLS
To exit rearview camera view, select an-
other camera view in the selection window
or press the button again.
General information
As soon as obstacles are detected, the view
changes to a fixed display of the area in front
of or behind the bumper, or switches to side
Park Distance Control as necessary.
Deactivated rearview camera
When the rearview camera is deactivated, for
instance when the trunk is open, the camera
image is displayed with gray shading.
When reverse gear is engaged, the automatic
camera perspective is, if necessary, exited and
the system uses a semi-automatic camera
perspective to the rear. If necessary, select the
automatic camera perspective when reverse
gear is engaged. The automatic camera per-
spective will then be maintained for the current
parking operation.
Semi-automatic camera
perspective
Follow the information in the "Parking assis-
tance systems" chapter.
Principle
Depending on the parking direction and en-
gaged selector lever position, a fixed camera
perspective is displayed with the areas in front
of or behind the vehicle.
Turning the automatic camera
perspective on/off
Turning the camera view on/off
automatically
When the parking assistance systems' display
is turned on, automatic camera perspective is
selected automatically.
General information
Follow the information in the "Parking assis-
tance systems" chapter.
Turning the semi-automatic camera
perspective on/off
The icon in the selection window is selected
automatically.
To exit the steering-dependent camera view,
select another camera view in the selection
window.
1.
Press the button.
2.
Select the icon in the selection window.
To exit the fixed camera view, select an-
other camera view in the selection window.
Turning the camera view on/off
manually
Automatic camera
perspective
1.
Press the button.
2.
The icon in the selection window is se-
lected automatically.
Principle
To exit the steering-dependent camera
view, select another camera view in the se-
lection window or press the button again.
The automatic camera perspective shows a
steering-dependent view in the respective driv-
ing direction.
This perspective adapts to the respective driv-
ing situation.
252
Online Edition for Part no. 01405B37D97 - II/24
