Deutsch
EnglishLight and view -> Pathway lighting for your BMW i5 2023-2025
Light and view
CONTROLS
Welcome Light Carpet
Welcome lights
Principle
The welcome light turns on automatically for
a limited period of time when approaching or
unlocking the vehicle.
General information
Depending on the equipment, the exterior
lighting of the vehicle can be set individually.
The light source is located in the position indi-
cated.
Activating/deactivating welcome
light
Keep the light source clean and unobstructed.
1.
Apps menu
2. "Vehicle"
Pathway lighting
3. "Exterior lighting"
4. If necessary, "Additional settings"
Principle
5. Depending on the equipment, select the
following setting:
For the pathway lighting, the exterior lighting
turns on for a certain period of time after leav-
ing the vehicle in order to illuminate the area
surrounding the vehicle.
▷
"Welcome and goodbye"
When unlocking the vehicle, individual
lighting functions are turned on.
Switching pathway lighting on
▷
"BMW Iconic Glow"
▷
After switching off the drive-ready state,
briefly push the turn signal lever forward.
The radiator grille lighting can only be
adjusted when the vehicle is stationary
and the drive-ready state is switched
off.
▷
Press and hold the button on the
vehicle key for approx. 1 second.
Turning on the welcome light
Setting the duration
▷
Automatically on approach.
1.
Apps menu
▷
During unlocking.
2. "Vehicle"
3. "Exterior lighting"
▷
Press the button on the vehicle key
with the vehicle locked.
4. If necessary, "Additional settings"
5. "Pathway lighting"
Depending on the settings, the interior
lighting and parts of the exterior lighting will
be turned on.
6. Select the desired setting.
The function is not available for the first
10 seconds after locking.
169
Online Edition for Part no. 01405B37D97 - II/24
Light and view
CONTROLS
The adaptive lighting functions are active
when the drive-ready state is switched on.
Daytime driving lights
General information
The daytime driving lights illuminate when
drive-ready state is switched on.
Cornering light
Principle
Activating/deactivating daytime
driving lights
In some countries, daytime driving lights are
mandatory, so it may not be possible to deacti-
vate the daytime driving lights in front.
In tight curves, for instance on mountainous
roads or when turning, an additional cornering
light is switched on that illuminates the inside
of the curve when the vehicle is moving below
a certain speed.
1.
Apps menu
General information
The cornering light is automatically switched
on depending on the steering-wheel angle or,
where applicable, the use of turn signals.
2. "Vehicle"
3. "Exterior lighting"
4. If necessary, "Additional settings"
5. Depending on vehicle equipment or na-
tional-market version:
When driving in reverse, the cornering lights
may be automatically switched on regardless
of the steering-wheel angle.
▷
▷
▷
"Daytime driving lights"
"Rear daytime driving lights"
"BMW Iconic Glow"
Adaptive headlight range
control
Adaptive lighting functions
The adaptive headlight range control feature
balances out acceleration and braking proc-
esses as well as the vehicle load conditions in
order to avoid blinding oncoming traffic.
Principle
Adaptive lighting functions enable dynamic il-
lumination of the road.
Instrument lighting
General information
The adaptive lighting functions may consist of
one system or multiple systems, depending on
the equipment version:
Functional requirement
The brightness can only be adjusted in dark-
ness and with turned on parking lights or low-
beam headlights.
▷
Cornering light.
Activating the adaptive lighting
functions
Setting the brightness
1.
Apps menu
Press the button on the light switch.
2. "Vehicle"
3. "Interior lighting"
The LED in the button illuminates.
170
Online Edition for Part no. 01405B37D97 - II/24
