Deutsch
EnglishDisplays for your BMW i5 2023-2025
Displays
CONTROLS
Displays
thorized service center or another qualified
service center or repair shop.
Vehicle features and options
This chapter describes model-specific equip-
ment, systems, and functions that are currently
available, or may become available in the fu-
ture, even if they are not present in the vehicle.
Overview
Additional information:
Vehicle equipment, refer to page 8.
Instrument cluster
Principle
The instrument cluster comprises various digi-
tal displays, e.g., a speedometer, time, range,
temperature as well as indicator and warning
lights.
Instrument cluster
Display ranges on the instrument
cluster
General information
The layout of the instrument cluster adapts to
the respective driving mode. The positions of
some displays may vary, e.g., the selector lever
display.
Some of the displays in the instrument cluster
may differ from the illustrations in the Owner's
Manual.
1
Speedometer
Safety information
2
Driver assistance systems 219
Parking assistance systems 246
Driver Attention Camera 212
Check Control 146
Warning
3
4
If the driving information displays on the in-
strument cluster fail, e.g., the speedometer,
do not use the vehicle. There is a risk of
accident, injury, or property damage. Imme-
diately park the vehicle in a safe manner.
Turning drive-ready state off and on again
may correct the malfunction, allowing you to
continue driving. If the malfunction cannot be
corrected, have the vehicle checked by an au-
Selector lever display 129
Selection lists 153
Efficiency trainer 313
Power gauge 154
5
6
7
Range 155
Selector lever position 129
143
Online Edition for Part no. 01405B37D97 - II/24
Displays
CONTROLS
Select the menu by tilting the knurled wheel
on the steering wheel where applicable.
Outside temperature 156
Charging screen 156
8
9
3. Select the desired setting using the knurled
wheel on the steering wheel.
Central display range 157
My Modes drive mode 136
10 Speed Limit Info 219
Speed Limit Assistant 240
11 Time 160
Settings
Specific displays can be configured individu-
ally, e.g., a second actual speed.
12 High-voltage battery charge state indicator
1.
Apps menu
160
2. "Vehicle"
3. "Displays"
Additional information:
4. "Instrument cluster"
5. Select the desired setting.
Indicator/warning lights, refer to page 147.
Operating elements on the steering
wheel
Live Vehicle
Operating Function
element
Principle
Live Vehicle is a virtual representation of your
own vehicle with different information, e.g., ve-
hicle status or energy flow indicators.
Display the menu bar on the in-
strument cluster.
Turn knurled wheel: scroll selec-
tion up or down.
General information
Tilt knurled wheel in corre-
sponding direction: Move selec-
tion to left or right.
Appropriate information is shown on the con-
trol display depending on the driving situation.
Fault statuses are not taken into account.
Press knurled wheel: confirm
selection.
Adaptive content
The following content is displayed in alternat-
ing order and, if necessary, depending on the
selected drive mode:
Configuring the layout
In Personal Mode drive mode, the layout in
the instrument cluster can be individually con-
figured and displayed.
▷
▷
▷
▷
▷
Vehicle status, refer to page 161.
Current driving condition, refer to page 162.
Sport displays, refer to page 162.
Efficiency trainer, refer to page 313.
Trip data, refer to page 158.
1.
Press the button on the steering
wheel.
A menu bar is displayed in the instrument
cluster.
Static information
The following information may be shown per-
manently on the control display regardless of
the driving situation and driving mode set.
2. "LAYOUT"
144
Online Edition for Part no. 01405B37D97 - II/24
Displays
CONTROLS
▷
▷
Vehicle status.
Trip data.
Overview
Adjusting the display
In the Live Vehicle menu, you can choose be-
tween an adaptive display and static content.
1.
Apps menu
2. "Vehicle"
3. "Live Vehicle"
4. "Content"
Head-up display views are projected onto the
windshield through a protective glass. The pro-
tective glass is located between the steering
wheel and windshield.
5. Select the desired setting.
BMW Head-up display
Displayable information
The following information is displayed on the
Head-up display:
Principle
The Head-up display projects important infor-
mation, e.g., speed, onto the windshield in the
driver's field of view. Information can be re-
corded without you having to look away from
the road.
▷
▷
▷
▷
▷
▷
▷
Vehicle speed.
Navigation instructions.
Check Control messages.
Sport displays.
The steering wheel buttons can be used to
configure various views for the Head-up dis-
play. Additional settings can be changed on
the control display, e.g., brightness or height.
Efficiency trainer.
Lists and messages.
Driver assistance systems.
Some of this information is only displayed
briefly as needed.
General information
Follow instructions for cleaning the Head-up
display in the Vehicle Care chapter.
Configuring a view
The views for the Head-up display can be set
independently of the display on the instrument
cluster, e.g., a reduced view.
Additional information:
Caring for special components, refer to
page 379.
1.
Press the button on the steering
wheel.
A menu bar is displayed in the instrument
cluster.
2. "HEAD-UP"
145
Online Edition for Part no. 01405B37D97 - II/24
Displays
CONTROLS
Select the menu by tilting the knurled wheel
on the steering wheel where applicable.
Special windshield
The windshield is part of the system.
3. Select the desired setting using the knurled
wheel on the steering wheel.
The shape and coating of the special wind-
shield enable the system to function.
If damaged, have the special windshield re-
placed by an authorized service center or an-
other qualified service center or repair shop.
Turning the Head-up display on/off
1.
Apps menu
2. "Vehicle"
3. "Displays"
Check Control
4. "Head-up display"
5. "Head-up display"
Principle
The Check Control system monitors functions
in the vehicle and notifies you of faults in the
monitored systems.
Settings
Individual settings can be entered for the
Head-up display such as for the height, bright-
ness or illustration. In addition, individual dis-
plays in the Head-up display can be set up
separately such as for Driver Assistance.
A Check Control message is displayed as
a combination of indicator lights or warning
lights and text messages on the instrument
cluster and, if applicable, on the Head-up dis-
play. In addition, an acoustic signal may sound
and a text message may appear on the control
display.
1.
Apps menu
2. "Vehicle"
3. "Displays"
Some Check Control messages are hidden au-
tomatically after approx. 20 seconds, but they
will be stored. Stored Check Control messages
can be displayed on the control display. Urgent
Check Control messages are permanently dis-
played but may be hidden temporarily.
4. "Head-up display"
5. Select the desired setting.
Visibility of the display
The visibility of the displays in the Head-up
display is influenced by the following factors:
Hiding Check Control messages
▷
▷
Seat position.
Permanently displayed Check Control mes-
sages can be hidden temporarily. These mes-
sages are automatically displayed again after
approx. 8 seconds.
Objects on the Head-up display's protective
glass.
▷
Dust or dirt on the Head-up display's pro-
tective glass.
An arrow icon next to the Check Control
message indicates whether the Check Control
message can be hidden.
▷
▷
▷
▷
Windshield dirty on inside or outside.
Sunglasses with certain polarization filters.
Wet road.
To hide Check Control messages, tilt
the knurled wheel on the steering
wheel to the left.
Unfavorable light conditions.
If the image is distorted, have the basic set-
tings checked by an authorized service center
or another qualified service center or repair
shop.
146
Online Edition for Part no. 01405B37D97 - II/24
Displays
CONTROLS
Displaying stored Check Control
messages
Additional information such as the cause of a
fault or the required action can be called up via
Check Control.
Indicator lights and warning
lights
Principle
The indicator lights and the warning lights on
the instrument cluster show the status of some
functions in the vehicle. The indicator lights
and warning lights indicate faults in monitored
systems.
Depending on the Check Control message, fur-
ther help can be selected.
1.
Apps menu
2. "Vehicle"
3. "Vehicle status"
General information
Indicator lights and warning lights can illumi-
nate in a variety of combinations and colors.
4. "Check Control"
5. Select the desired text message.
Several of the lights are checked for proper
functioning and illuminate temporarily when
drive-ready state is turned on.
Display
A Check Control message is displayed in the
instrument cluster as a text message with an
icon.
Red lights
For urgent messages, an added text is auto-
matically displayed on the control display.
Seat belt reminder
If several faults occur at once, the messages
are displayed consecutively.
Seat belt on the driver's seat is not
buckled.
Certain messages displayed while driving are
displayed again after drive-ready state is
switched off.
Additional information:
Seat belt reminder, refer to page 114.
Icons in the instrument cluster indicate
an active or saved Check Control mes-
sage.
Airbag system
Warning light illuminates briefly: Indi-
cates that the entire airbag system and
seat belt tensioners are operational
when drive-ready state is switched on.
Warning light does not illuminate or illuminates
continuously: the airbag system or the seat
belt tensioners may not be operational. Have
the vehicle checked immediately by an author-
ized service center or another qualified service
center or repair shop.
Additional information:
Airbags, refer to page 176.
147
Online Edition for Part no. 01405B37D97 - II/24
Displays
CONTROLS
Warning light flashes and a signal sounds: risk
of imminent collision with a person, e.g., a pe-
destrian or a cyclist. Immediately initiate brak-
ing or an evasive maneuver.
Parking brake
The parking brake is set.
Additional information:
Parking brake, refer to page 138.
Additional information:
Warning function for pedestrians, refer to
page 187.
Brake system
The brake pads are worn or there is
another issue with the brake system.
Forward Collision Warning
The braking assistance may not be op-
erational. A higher pedal force may be
required for the braking process.
Warning light illuminates: risk of colli-
sion, e.g., with a vehicle, is detected.
Increased awareness is required.
Have the vehicle checked immediately by an
authorized service center or another qualified
service center or repair shop.
Warning light flashes and a signal sounds: risk
of imminent collision with a vehicle detected.
Immediately initiate braking or an evasive ma-
neuver.
Additional information:
System fault
Warning function in rear-end collision situa-
tions, refer to page 184.
Contact an authorized service center or
another qualified service center or re-
pair shop.
Intersection Collision Warning: vehicle
detected from the right
Emergency Stop Assistant
Warning light illuminates: risk of colli-
sion with vehicle crossing from the right
detected. Increased awareness is re-
quired.
The Emergency Stop Assistant is trig-
gered.
Additional information:
Emergency Stop Assistant, refer to page 204.
Warning light flashes and a signal sounds: risk
of imminent collision with a crossing vehicle
detected. Immediately initiate braking or an
evasive maneuver.
Risk of collision
Warning light illuminates or flashes in
conjunction with an acoustic signal if
there is risk of imminent collision.
Additional information:
Warning function at intersections, refer to
page 188.
Additional information:
Forward Collision Mitigation, refer to
page 181.
Intersection Collision Warning: vehicle
detected from the left
Pedestrian Warning
Warning light illuminates: risk of colli-
sion with vehicle crossing from the left
detected. Increased awareness is re-
quired.
Warning light illuminates: risk of colli-
sion with a person, e.g., a pedestrian
or a cyclist. Increased awareness is re-
quired.
148
Online Edition for Part no. 01405B37D97 - II/24
Displays
CONTROLS
Warning light flashes and a signal sounds: risk
of imminent collision with a crossing vehicle
detected. Immediately initiate braking or an
evasive maneuver.
The system reduces the speed to a standstill if
applicable.
It is possible that the system will not execute
any supporting steering movements.
Additional information:
Immediately grasp the steering wheel with
your hands and pay attention to the surround-
ing traffic.
Warning function at intersections, refer to
page 188.
Additional information:
Distance Control
Assisted Driving Mode, refer to page 232.
Warning light flashes and acoustic sig-
nal sounds: Brake and evade as neces-
sary.
Yellow lights
Additional information:
Antilock Braking System
Distance Control, refer to page 225.
The system may not be operational.
The Antilock Braking System is not
available.
Assisted Driving Mode
The ability to steer may be restricted
during full braking.
Warning light flashes and acoustic sig-
nal sounds:
Have the vehicle checked immediately by an
authorized service center or another qualified
service center or repair shop.
The system is switched off or will be
interrupted very soon.
Warning light illuminates and acoustic signal
sounds:
Additional information:
Antilock Braking System, refer to page 214.
The driver's line of sight is not directed at the
surrounding traffic. System interruption is im-
minent. The system reduces the speed to a
standstill if applicable. It is possible that the
system will not execute any supporting steer-
ing movements.
Assisted Driving Mode
Warning light illuminates and acoustic
signal sounds: A system interruption is
imminent.
Additional information:
Warning light flashes: A lane boundary has
been crossed.
Assisted Driving Mode, refer to page 232.
Additional information:
Assisted Driving Mode: Hands are not
on steering wheel
Assisted Driving Mode, refer to page 232.
Warning light illuminates and acoustic
signal sounds:
Assisted Driving Mode: Hands are not
on steering wheel
The hands are not on the steering
wheel or, depending on the vehicle equipment
and national-market version, the driver's line of
sight is not directed at the surrounding traffic.
System interruption is imminent.
Hands are not grasping the steering
wheel. The system is still active.
Grab the steering wheel with your
hands.
Additional information:
149
Online Edition for Part no. 01405B37D97 - II/24
Displays
CONTROLS
Assisted Driving Mode, refer to page 232.
Reduce your speed and stop cautiously. Avoid
sudden braking and steering maneuvers.
Additional information:
Dynamic Stability Control
Flat tire monitor, refer to page 351.
Warning light flashes: Dynamic Stabil-
ity Control is regulating the driving and
brake power. The vehicle is stabilized.
Reduce the vehicle speed and adjust your driv-
ing style to the road conditions.
Tire pressure monitor
Warning light illuminates: Flat tire or
tire pressure loss has been detected.
Follow the information in the Check
Control message.
Warning light illuminates: Dynamic Stability
Control has malfunctioned or is initializing.
Driving stabilization is restricted or has failed.
Warning light flashes then illuminates continu-
ously: Flat tires or tire pressure losses cannot
be detected.
If the warning light illuminates continuously,
have the vehicle checked immediately by an
authorized service center or another qualified
service center or repair shop.
▷
▷
▷
▷
Fault caused by systems or devices with
the same radio frequency: after leaving the
area of the interference, the system auto-
matically becomes active again.
Additional information:
Dynamic Stability Control, refer to page 214.
In the case of tires with special appro-
val: the tire pressure monitor was unable
to complete the reset. Reset the system
again.
The Dynamic Stability Control
deactivated or increased driving
dynamics activated
Wheel without wheel electronics installed:
Have it checked by an authorized service
center or another qualified service center or
repair shop as needed.
Dynamic Stability Control is deactivated
or enhanced driving dynamics is acti-
vated.
Additional information:
Malfunction: have the vehicle checked by
an authorized service center or another
qualified service center or repair shop.
▷
Dynamic Stability Control, refer to
page 214.
▷
Setting for increased driving dynamics, re-
fer to page 215.
Additional information:
Tire pressure monitor, refer to page 345.
Drive-off support
Steering system
Drive-off support is activated.
The steering system may not be op-
erational.
Additional information:
Drive-off support, refer to page 216.
Have the vehicle checked by an author-
ized service center or another qualified service
center or repair shop.
Flat tire monitor
Warning light illuminates: Flat tire or
tire pressure loss has been detected.
150
Online Edition for Part no. 01405B37D97 - II/24
Displays
CONTROLS
Acoustic pedestrian protection
Automatic High Beam Assistant
Acoustic pedestrian protection has
malfunctioned. Increased caution when
maneuvering.
Low-beam headlights are switched on
and the Automatic High Beam Assis-
tant is activated.
If malfunctioning repeatedly, have the vehicle
checked by an authorized service center or an-
other qualified service center or repair shop.
High-beam headlights are switched on and
off automatically depending on the traffic sit-
uation.
Additional information:
Additional information:
Acoustic pedestrian protection, refer to
page 128.
Automatic High Beam Assistant, refer to
page 165.
Charging capacity limited
Lane departure warning
Additional information:
Depending on vehicle equipment and
national-market version:
Charge vehicle, refer to page 316.
Indicator light flashes: the system is
performing a steering intervention.
Green lights
Additional information:
Lane departure warning, refer to page 192.
Turn signal
Turn signal is on.
Automatic Hold: vehicle is held
automatically
Unusually rapid flashing of the indicator
light indicates that a turn signal bulb
has failed.
Automatic Hold is ready to use. The
vehicle is automatically held in place
when it is stationary.
Additional information:
Turn signal, refer to page 164.
Additional information:
Automatic Hold, refer to page 140.
Parking lights
Parking lights are switched on.
Additional information:
Automatic Hold: vehicle secured
against rolling away
Parking lights, low-beam headlights,
refer to page 167.
The vehicle is automatically secured
against rolling away after stopping.
Additional information:
Low-beam headlights
Automatic Hold, refer to page 140.
Low-beam headlights are switched on.
Additional information:
Cruise Control
Parking lights, low-beam headlights,
refer to page 167.
The system is active.
Additional information:
Cruise control, refer to page 223.
151
Online Edition for Part no. 01405B37D97 - II/24
Displays
CONTROLS
Lane Change Assistant, refer to page 235.
Distance Control
Indicator light illuminates: Vehicle has
been detected ahead of you. The vehi-
cle icon goes out if no vehicle has been
Assisted Driving Mode Plus
The system is active.
Additional information:
detected ahead of you.
Indicator light flashes: Preceding vehicle has
driven off.
Assisted Driving Mode Plus, refer to
page 237.
Additional information:
Distance Control, refer to page 225.
Blue lights
Speed Limit Assist
High-beam headlights
The detected speed limit can be ap-
plied with the SET button. As soon as
the speed limit has been applied, a
green checkmark is displayed.
High-beam headlights have been
switched on.
Additional information:
High-beam headlights, refer to page 164.
Additional information:
Speed Limit Assistant, refer to page 240.
Gray lights
Assisted Driving Mode
Seat belt reminder
The system supports the driver in
keeping the vehicle within the lane.
Seat belt on the passenger seat or an-
other seat in the vehicle is not buckled.
Additional information:
Additional information:
Assisted Driving Mode, refer to page 232.
Seat belts, refer to page 112.
Lane Change Assistant: lane change in
progress
Distance Control
Indicator light flashes: Conditions are
not adequate for the system to work.
The system was deactivated but ap-
plies the brakes until you actively resume con-
trol by pressing on the brake pedal or accelera-
tor pedal.
Arrow icon for lane change green: the
system carries out a lane change.
Additional information:
Lane Change Assistant, refer to page 235.
Additional information:
Lane Change Assistant: lane change
not possible
Distance Control, refer to page 225.
Gray line for lane boundary on the ap-
propriate side: system detected a lane
change request. Lane change not cur-
rently possible.
Assisted Driving Mode
The system is on standby and does not
manipulate steering movements.
Additional information:
System activates automatically as soon
as all function conditions are fulfilled.
152
Online Edition for Part no. 01405B37D97 - II/24
Displays
CONTROLS
Additional information:
Displaying and using the list
The selection lists can be displayed and op-
erated using the operating elements on the
steering wheel.
Assisted Driving Mode, refer to page 232.
Assisted Driving Mode Plus
Operating Function
elements
The system is interrupted and will acti-
vate automatically as soon as all func-
tional requirements are met.
Change the entertainment
source.
Additional information:
Assisted Driving Mode Plus, refer to page 237.
Pressing the button again will
close the currently displayed list.
Show list of most recent tele-
phone calls.
White lights
Cruise Control with Distance Control
Turn the knurled wheel: display
the list for currently selected en-
tertainment source or scroll up
or down in the list.
No Distance Control because accelera-
tor pedal is being pressed.
Additional information:
Distance Control, refer to page 225.
Tilt knurled wheel in corre-
sponding direction: Move selec-
tion to left or right.
Assisted Driving Mode Plus
Press knurled wheel: confirm
selection.
The system can be activated.
Additional information:
Assisted Driving Mode Plus, refer to
page 237.
Display
Selection lists
Principle
Lists can be displayed and, if necessary, used
for certain functions in the instrument cluster or
the Head-up display.
Selection lists, e.g., entertainment sources, are
displayed on the instrument cluster.
▷
▷
▷
Entertainment source.
Current audio source.
List of most recent telephone calls.
If necessary, the corresponding menu will open
on the control display.
153
Online Edition for Part no. 01405B37D97 - II/24
Displays
CONTROLS
Example: selecting a radio station
Display
1.
Press the entertainment sources
button.
2.
To switch to the list of radio sta-
tions, tilt the knurled wheel to the right.
3. Turn the knurled wheel to select a radio
station.
4. Press the knurled wheel to confirm the se-
lected radio station.
Needle in the area of arrow 1: display of the
energy recovered by coasting or when deceler-
ating.
Example: changing the entertainment
source
Needle near arrow 2: Drive power in percent.
Energy recovery display
1.
Press the entertainment sources
button.
Icon
Meaning
Low energy recovery.
2.
To select an entertainment source,
turn the knurled wheel.
Selector lever position D is en-
gaged.
3. Press the knurled wheel to confirm the se-
lected entertainment source.
Average energy recovery.
Selector lever position D is en-
gaged.
Power gauge
High energy recovery.
Selector lever position D or B is
set.
Principle
The power gauge indicates the current electric
drive power as a percentage.
Adaptive recuperation is acti-
vated
Adaptive recuperation, refer to
page 311.
The degree of the energy recovery depends on
the settings for the energy recovery.
Additional information:
Driving in detail: eDRIVE, refer to page 132.
154
Online Edition for Part no. 01405B37D97 - II/24
Displays
CONTROLS
Additional information:
Reduced drive power
The available power may be reduced due to
certain factors. The power gauge is automati-
cally adjusted accordingly.
▷
Operating state of the vehicle, refer to
page 45.
In addition, the icons on the power gauge indi-
cate reduced drive power:
Range
Icon
Description
General information
The expected range for the energy stored in
the high-voltage battery is continuously dis-
played in the instrument cluster.
Blue icon: cold drivetrain.
White icon: increased drive sys-
tem temperature, for instance
due to sustained or high
power demand when driving
on mountain roads.
Always make sure that the range is sufficient
for the planned trip. The range is dynamic and
can abruptly change.
The range can be reduced or increased based
on the following factors:
Depending on vehicle equip-
ment and national-market ver-
sion:
▷
▷
▷
▷
▷
▷
Driving style.
Drive power limitation defined
via the BMW Digital Key.
Traffic conditions.
Drive mode change.
Heavily discharged high-volt-
age battery.
Climate and terrain conditions.
Automatic climate control settings.
System-related functional limi-
tation.
After determination of a route through the
navigation system depending on the route
profile, route distance and selected speed.
A Check Control message is
displayed in addition where ap-
plicable.
▷
▷
When exiting a route or recalculating a
route.
By preheating/precooling the high-voltage
battery for a DC charging process.
Standby state and drive-
ready state
Information about the current range can be
displayed in the instrument cluster.
Check Control messages indicate a limited
range.
OFF is displayed in the instru-
ment cluster. Drive-ready state
is turned off and standby state
turned on.
Additional information:
▷
▷
Range prediction, refer to page 160.
Increasing the range, refer to page 311.
When the drive-ready state
is switched on, READY is dis-
played in the instrument cluster.
155
Online Edition for Part no. 01405B37D97 - II/24
Displays
CONTROLS
Display
Outside temperature
The range is continuously dis-
played in the instrument cluster.
General information
If the indicator drops to +37℉/+3℃ or lower, a
signal sounds.
A Check Control message is displayed.
There is an increased risk of ice on roads.
Range with active guidance
The icon is displayed next to the range
when guidance was started in the navigation
system. Information from the navigation sys-
tem is taken into account for the calculation of
the current range.
Safety information
Warning
Even at temperatures above +37 ℉/+3 ℃
there is a risk of icy roads, for instance on
bridges or shady sections of the road. There
is a risk of accident, injury, or property dam-
age. Modify your driving style to the weather
conditions at low temperatures.
Heavily discharged high-voltage
battery
The high-voltage battery is
heavily discharged. The drive
power will be reduced. Heating
and climate control functions will
be deactivated.
Charging screen
In this state, the exact range can no longer be
calculated. A short range may still be available
depending on the environmental condition.
Principle
The charging screen displays information
about the charging process in the instrument
cluster.
Re-establishing the drive-ready state can help
increase the range slightly, for instance to re-
move the vehicle from a hazardous area.
General information
Some of the displays in the instrument cluster
may differ from the illustrations in the Owner's
Manual.
State of charge in strong
temperature fluctuations
In the case of strong temperature fluctuations
and a low state of charge of the high-voltage
battery, it may not be possible to start the ve-
hicle again at the beginning of the next trip.
Recharge vehicle with a low state of charge in
time.
When the vehicle is locked, the most important
information is displayed for a short period of
time.
Display charging screen again:
With the charging cable plugged in,
press the button on the vehicle key.
The function is not available for the first
10 seconds after locking.
Additional information:
156
Online Edition for Part no. 01405B37D97 - II/24
Displays
CONTROLS
Charge vehicle, refer to page 316.
Depending on vehicle equipment, Aug-
mented View on the instrument cluster en-
ables the visualization of driver assistance
systems on the actual vehicle's surround-
ings.
Overview
Grey lines indicate the recommended min-
imum distance to the preceding vehicle
when speed control systems are deacti-
vated.
▷
Android Auto©.
Depending on vehicle equipment and na-
tional-market version, select functions of
a compatible smartphone can also be dis-
played, e.g., map views.
1
Current charging capacity 326
Charge target set 325
2
Some contents for the central display range
can also be configured as a view in the Head-
up display.
End of charging time 326
Set departure time 327
Departure preconditioning 327
Current range 326
3
4
5
Additional information:
Head-up display, refer to page 145.
Current state of charge 326
Owner's Manual for Navigation, Entertain-
ment, and Communication, refer to page 6.
6
Range when reaching the charging desti-
nation 326
Configuring the central display
range
The content of the central display range on the
instrument cluster can be configured individu-
ally, for instance the trip data display.
7
Charging cable status 318
8
9
Charging station restriction 316
Set or maximum current limit 316
Central display range
1.
Press the button on the steering
wheel.
Displayable content
A menu bar is displayed in the instrument
cluster.
The following settings can be selected:
▷
▷
▷
▷
▷
▷
▷
▷
▷
Reduced display.
2. "CONTENT"
Trip data, refer to page 158.
Range prediction, refer to page 160.
Assisted View, refer to page 159.
Navigation system route preview.
Navigation system map view.
G-Meter, refer to page 160.
Entertainment.
Select the menu by tilting the knurled wheel
on the steering wheel where applicable.
3. Select the desired setting using the knurled
wheel on the steering wheel.
Augmented View.
157
Online Edition for Part no. 01405B37D97 - II/24
Displays
CONTROLS
Display in the instrument cluster
Information on energy consumption and dis-
tance covered can be displayed in the instru-
ment cluster.
Trip data
Principle
The trip data display provides various informa-
tion about the trip, e.g., average energy con-
sumption or trip distance.
General information
The trip data can be displayed on the control
display and in the instrument cluster.
Depending on the setting in the Live Vehicle
menu, the trip data is shown on the control
display.
▷
▷
▷
Current energy consumption, arrow 1.
Average energy consumption, arrow 2.
The values can be displayed and reset de-
pending on different intervals.
Distance traveled depending on the config-
ured interval, arrow 3.
Display on the control display
▷
Total mileage, arrow 4.
General information
The following trip data is shown on the control
display:
Current energy consumption
The current energy consumption display lets
you check your current energy consumption,
e.g., to drive efficiently.
▷
▷
Configured interval for displaying trip data.
Average energy consumption depend-
ing on the set interval.
Average energy consumption
The average energy consumption is deter-
mined on the basis of various distances.
▷
▷
▷
Travel time depending on the config-
ured interval.
Distance traveled depending on the
configured interval.
Adjusting the display of the trip data
The intervals for the display of the trip data
in the instrument cluster and on the control
display are adjustable.
Counter for energy recovery depend-
ing on the configured interval.
Displaying trip data continuously
1.
Apps menu
1.
Apps menu
2. "Vehicle"
2. "Vehicle"
3. "Live Vehicle"
4. "Content"
5. "Trip data"
3. "System settings"
4. "Time period for trip data"
5. "Values"
6. Select the desired setting:
158
Online Edition for Part no. 01405B37D97 - II/24
Displays
CONTROLS
▷
"Since start of trip": the values are auto-
matically reset approx. four hours after
the vehicle has come to a standstill.
Assisted View
Principle
▷
▷
"Since last charge": the values are auto-
matically reset after charging.
With Assisted View, information on driver as-
sistance systems can be displayed on the in-
strument cluster with a vehicle animation.
"Since factory": the values since the
time of the factory delivery are dis-
played.
Information on parking and maneuvering is
displayed in the Assisted View whenever the
parking assistance system is active.
▷
"Since Individual": the values since the
last manual reset are displayed. The
values can be reset at any time.
Safety information
Resetting average values manually
The following interval can be reset manually at
any time:
Warning
The system cannot serve as a substitute for
the driver’s personal judgment in assessing
the traffic situation. Based on the limits of
the system, it cannot independently react to
all traffic situations. There is a risk of acci-
dent, injury, or property damage. Adjust driv-
ing style to traffic conditions. Watch the sur-
rounding traffic situation closely, be ready to
take over steering and braking at any time,
and actively intervene where appropriate.
"Since Individual ( )"
Using the knurled wheel on the steering wheel:
1. Display trip data in the instrument cluster.
2. Press and hold the
knurled wheel
on the steering wheel until the values are
reset.
Via iDrive:
1. Apps menu
General
2. "Vehicle"
You can configure how Assisted View is dis-
played on the central display range.
3. "System settings"
4. "Time period for trip data"
5. "Reset Individual"
Additional information:
Central display area, refer to page 157
The average values and counters are reset.
Once the average values and counters have
been reset, the following interval is automati-
cally activated:
Display
"Since Individual ( )"
159
Online Edition for Part no. 01405B37D97 - II/24
Displays
CONTROLS
An example of active Driver Assistance: Indica-
tor and warning lights for Distance Control and
Assisted Driving Mode are displayed. At the
same time, the Distance Control is animated in
Assisted View.
Depending on vehicle equipment and national-
market version, the time zone can be set or
automatic time zone enabled. With automatic
time setting, the time, date and, if necessary,
the time zone are updated automatically.
1.
Apps menu
System limits
The system's detection capability is limited.
2. "Vehicle"
3. "System settings"
4. "Date and time"
5. Select the desired settings.
Only objects that are detected by the system
are taken into account.
Additional information:
▷
▷
Cameras, refer to page 40.
Radar sensors, refer to page 41.
State of charge indicator
Safety information
Warning
G-Meter
General information
Even when it is indicated that the high-volt-
age battery is discharged, the high-voltage
system is always still under high voltage.
There is a risk of fire or a risk of injury. Do
not touch or change live parts, e.g., orange
high-voltage cables, even when the batteries
are discharged.
The G-Meter indicates the forces that are ap-
plied in longitudinal and transverse direction
on the vehicle occupants while driving.
The display can be configured on the central
display range of the instrument cluster.
The values are automatically reset whenever
you start a new drive.
Additional information:
Display
Central display area, refer to page 157
When standby and drive-ready
state are turned on, the availa-
ble battery charge state of the
high-voltage battery is continu-
ously displayed in percent in the
instrument cluster.
Manually reseting G-Meter values
1. Display the G-Meter on the instrument
cluster.
2.
Press and hold the knurled wheel
on the steering wheel until the values are
reset.
In case of temperature fluctuations, the battery
charge state may change.
Range prediction
Date and time
Various settings can be applied for the date
and time display such as the date format.
Principle
The range prediction indicates the extent to
which the range can be influenced with the
160
Online Edition for Part no. 01405B37D97 - II/24
Displays
CONTROLS
current driving style. This supports an efficient
driving style.
Icon
Description
The expected battery charge
state when the destination is
reached is displayed next to
the icon.
General information
The current range is influenced by many fac-
tors, including speed.
The icon is displayed when
route guidance to a charging
post was started on the navi-
gation system.
The range trend shows the expected develop-
ment of the range with the current driving style.
The range trend is based on the average elec-
trical consumption that is calculated for the di-
rectly traveled route section.
The icon is displayed when
route guidance was restarted
on the navigation system. In-
formation from the navigation
system is taken into account
for the calculation of the cur-
rent range.
Additional information:
▷
▷
Range, refer to page 155.
Increasing the range, refer to page 311.
Overview
Setting the units of
measurement
Depending on the national-market version, you
can set the units of measurement for some
values, for instance energy consumption, dis-
tances, and temperature.
▷
▷
▷
Current range, arrow 1.
1.
Apps menu
Range trend, arrow 2.
2. "Vehicle"
Possible range with very low energy con-
sumption, arrow 3.
3. "System settings"
4. "Units"
▷
Possible range with very high energy con-
sumption, arrow 4.
5. Select the desired setting.
Range prediction with active
guidance
Vehicle status
With active guidance, the distance to the des-
tination and the expected charge state of the
high-voltage battery when the destination is
reached are also displayed.
General information
The status can be displayed and actions per-
formed for several systems such as for Check
Control.
161
Online Edition for Part no. 01405B37D97 - II/24
Displays
CONTROLS
Displaying vehicle status
Functional requirements
1.
Apps menu
▷
Personal or Efficient driving mode is se-
lected.
2. "Vehicle"
▷
For Live Vehicle, select the following set-
ting: "Adaptive content".
3. "Vehicle status"
Overview
Display
Icon
Description
"FLAT TIRE MONITOR": Sta-
tus of the flat tire monitor, refer
to page 351.
"Tire Pressure Monitor": status
of the Tire Pressure Monitor,
refer to page 345.
"Check Control": displaying
stored Check Control mes-
sages, refer to page 146.
An example:
The adaptive recuperation is active, arrow 1.
The high-voltage battery is charged when the
vehicle is decelerating, arrow 2.
"Service": display of the service
notifications, refer to page 163.
Current driving condition
Sport displays
General information
The current driving condition is displayed dy-
namically while driving in the Live Vehicle
menu on the control display.
Principle
The Sport displays especially support a sporty
driving style.
Functional requirements
The following states can be displayed:
▷
SPORT driving mode is selected.
▷
▷
▷
▷
Driving.
▷
The following setting is selected for Live
Vehicle:"Adaptive content"
Coasting mode: "EFFICIENT COASTING".
"CHARGING BATTERY"
Adaptive recuperation.
Display
Depending on the situation, additional in-
formation on adaptive recuperation is dis-
played.
The sport displays are displayed in the Live
Vehicle menu on the control display.
The following information is displayed:
Additional information:
▷
▷
Torque.
Power.
▷
▷
Adaptive recuperation, refer to page 311.
Coasting, refer to page 312.
162
Online Edition for Part no. 01405B37D97 - II/24
Displays
CONTROLS
▷
▷
Speed, electric motor.
6. "Date:"
7. Select the desired setting.
Temperature, electric motor.
Service
Principle
The service notifications indicate recom-
mended maintenance work.
General information
After turning on, the next service appointment
or the distance remaining until the next servic-
ing is displayed briefly on the instrument clus-
ter.
A service advisor can read out the mainte-
nance work from the vehicle key.
Display
More information may be displayed on the
control display.
1.
Apps menu
2. "Vehicle"
3. "Vehicle status"
4. "Service"
Maintenance measures as well as legally
mandated inspections are displayed.
5. Select the desired entry.
Entering appointment dates
Dates for mandatory vehicle inspections can
be entered.
Make sure that the vehicle's date and time are
set correctly.
1.
Apps menu
2. "Vehicle"
3. "Vehicle status"
4. "Service"
5. "Vehicle inspection"
163
Online Edition for Part no. 01405B37D97 - II/24
