Deutsch
EnglishClimate control -> Pre-conditioning for your BMW i5 2023-2025
Climate control
CONTROLS
▷
▷
Gaseous pollutants are filtered.
Ventilation in the rear, on the side
Microbial particles, viruses and allergens
are filtered.
The manufacturer of the vehicle recommends
having the interior filter changed during vehicle
maintenance.
Pre-conditioning
Principle
▷
▷
Lever for changing the airflow direction, ar-
row 1.
Pre-conditioning cools or heats the vehicle in-
terior to a comfortable temperature, depend-
ing on the inside/outside temperature, prior to
starting a drive. This function makes it easier
to remove snow and ice.
Knurled wheel for variable opening and
closing of the air vents, arrow 2.
Setting the ventilation
Depending on the desired ventilation, align the
air flow directly or indirectly toward the pas-
sengers.
General information
The pre-conditioning can be switched on and
off directly or via a preset departure time.
The air automatically exits through the air
vents to the windshield, the side windows, the
upper body area and into the footwell.
Air quality
The system switches off automatically after
approx. 30 minutes or when the drive-ready
state is activated.
General information
The air quality in the interior is improved by the
following components:
Preconditioning the vehicle while it charges,
makes it easier for the climate control system
to regulate the temperature while driving. This
optimizes the range.
▷
▷
▷
Emission tested passenger compartment.
Interior filter.
Air conditioning system to control the
temperature, air flow and recirculated-air
mode.
Functional requirements
▷
The vehicle is in idle state or standby state.
▷
Stationary climate control.
▷
The high-voltage battery is sufficiently
charged or a charging cable is connected.
Interior filter
The interior filter cleans the incoming fresh
air or the circulated interior air in recirculation
mode.
If the high-voltage battery is deeply dis-
charged, it may take some time for the
preconditioning to be functional after the
charging cable is connected.
Depending on the equipment:
▷
▷
Time and date are set correctly.
The ventilation air vents are open.
▷
Dust and pollen is filtered out from the in-
flowing air.
▷
Nano-particle emissions are reduced.
286
Online Edition for Part no. 01405B37D97 - II/24
Climate control
CONTROLS
▷
▷
Set departure times.
Activate departure times.
Turning on/turning off the pre-
conditioning
A minimum of 10 minutes should pass be-
tween setting and activating the departure
time and the planned departure time to allow a
sufficient period of time for the climate control.
Turning on/turning off via iDrive
1.
Tap the icon for the Climate menu
on the menu bar.
Pre-conditioning will be turned off automati-
cally a few minutes after the set departure
time.
2. "General settings"
3. "Pre-conditioning"
Setting the departure time
4. Select the desired setting.
Turning on via vehicle key
The system can be switched on using the vehi-
cle key.
1.
Tap the icon for the Climate menu
on the menu bar.
2. "General settings"
Press the button on the vehicle key
three times within 1 second.
3. "Pre-conditioning"
4. "Departure plan"
After using the vehicle key, it takes ap-
prox. 3 seconds until pre-conditioning turns on.
5. Set the desired departure time.
6. Select day of the week, if needed.
Automatic switch-off
Activating the departure time
To ensure the vehicle's minimum range, the
preconditioning may turn off automatically,
e.g., after repeated activation or because the
high-voltage battery has insufficient charge. If
the preconditioning turns off because the ve-
hicle has insufficient charge, charge the high-
voltage battery. The pre-conditioning is then
available again.
To turn on the pre-conditioning prior to a de-
parture time, the respective departure time
must be activated beforehand.
1.
Tap the icon for the Climate menu
on the menu bar.
2. "General settings"
3. "Pre-conditioning"
Climate control for departure time
4. "Pre-conditioning for departure"
General information
Departure times can be set with time and day
of the week.
Display on the instrument cluster
Icon
Description
The switch-on point is determined automati-
cally based on the temperature.
Icon illuminates: a depar-
ture time is activated.
On the desired weekdays, the system will be
turned on promptly before the set departure
time.
Icon flashes: pre-condition-
ing is switched on.
The departure time is preselected in two steps:
287
Online Edition for Part no. 01405B37D97 - II/24
