Deutsch
EnglishCharging the vehicle -> Safety information for your BMW i5 2023-2025
Charging the vehicle
MOBILITY
Charging the vehicle
The manufacturer of the vehicle recommends
that, prior to your first use of a charging loca-
tion, you have the compatibility of the follow-
ing components confirmed:
Vehicle features and options
This chapter describes model-specific equip-
ment, systems, and functions that are currently
available, or may become available in the fu-
ture, even if they are not present in the vehicle.
▷
▷
▷
Charging cable.
Charging station.
Additional information:
Domestic socket outlet and connected
circuits.
Vehicle equipment, refer to page 8.
General information
Warning
Damaged or worn charging equipment, e.g.,
worn contacts, can become hot. There is a
risk of fire. Only use chargers that are in good
condition.
The vehicle can be charged using various
charging cables at charging stations, domestic
socket outlets or industrial sockets.
Control and monitoring of the charging process
are handled fully automatically. When charging
with AC, the charge current level can be ad-
justed via iDrive.
Warning
Even when it is indicated that the high-volt-
age battery is discharged, the high-voltage
system is always still under high voltage.
There is a risk of fire or a risk of injury. Do
not touch or change live parts, e.g., orange
high-voltage cables, even when the batteries
are discharged.
Safety information
Warning
Working with electrical current improperly can
lead to electric shock due to high voltages or
high currents. There is a risk of fire or danger
to life. Observe the general safety regulations
when working with electrical current.
Warning
Contact with live components can lead to an
electric shock. High voltage is present at the
charging connection. There is a risk of injury
or danger to life.
Warning
It is recommended that work on the charg-
ing connection, for example cleaning, is per-
formed by an authorized service center or an-
other qualified service center or repair shop.
A faulty or incorrectly designed charging de-
vice at the charging location can cause dam-
age to the vehicle and overload the power
supply at the charging location. There is a
risk of fire and an injury hazard.
316
Online Edition for Part no. 01405B37D97 - II/24
Charging the vehicle
MOBILITY
Charge current
NOTICE
The charging cable connected to the vehicle
and the charging cable connections may be
damaged due to mechanical load. There is
a risk of damage to property. Do not apply
mechanical loads to the charging cable and
the charging cable connections. Route the
charging cable to the vehicle freely and avoid
stress due to pulling or bending.
General information
The charge current strength is indicated in am-
peres.
There are differences in the maximum permis-
sible charging current depending on the local
power grid.
Before charging, set a suitable current limit for
the charging current.
When charging at charging stations, the per-
missible charging current is automatically de-
tected and a current limit is set.
Charging the high-voltage
battery
When charging at a domestic socket outlet, set
the current limit yourself.
The high-voltage battery serves as energy
storage. The high-voltage battery can be
charged utilizing energy recovery during the
trip or via the power grid.
Safety information
Charge the vehicle at a suitable charging de-
vice.
Warning
If the charge current strength is adjusted
incorrectly, the power grid of the domestic
socket outlet can be overloaded and over-
heat. There is a risk of fire. Adjust the charge
current strength to the power grid prior to
charging on domestic socket outlets. With un-
known power networks, set on the lowest
level.
Charge the high-voltage battery regularly so
that it operates optimally.
When charging via the power grid, you can
chose between the following variants:
▷
▷
▷
▷
Domestic socket outlet.
Industrial socket.
AC charging station.
DC charging station.
Charging on a domestic socket
outlet
The permitted charge current strength must
be determined, for instance by a qualified elec-
trician, before first charging with your own do-
mestic socket outlet or when charging with
third-party domestic socket outlets.
For optimal use of the energy from the power
grid, charging at a charging station, e.g., at a
BMW Wallbox, is recommended.
The power grid and charging station should
enable a charging capacity of at least 11 kW.
A lower charging capacity will extend the
charging time.
Ensure that the charging station is installed
according to the technical requirements of the
power grid, e.g. by a qualified electrician.
317
Online Edition for Part no. 01405B37D97 - II/24
