Deutsch
EnglishCharging the vehicle -> Permissible volume of DC charging for your BMW i5 2023-2025
Charging the vehicle
MOBILITY
Press the button on the vehicle key to
4. "Charging mode"
5. "Time slot"
check the charging state. The charging status
is indicated on the indicator light. In some
cases the vehicle is locked.
6. Select the desired setting.
Additional messages about charging status
can be shown on the instrument cluster or on
the mobile device using the My BMW App.
Charge target
Principle
A target value in percent can be set for charg-
ing the high-voltage battery.
Setting the charging mode
1.
Apps menu
When a lower target value is set, the charging
time may be shortened.
2. "Vehicle"
3. "Charging"
General information
A target value of 80 % is recommended for
fast charging and optimal service life of the
high-voltage battery.
4. "Charging mode"
5. Select the desired settings:
▷
"Immediately": the charging process
starts as soon as the charging cable is
connected.
Target values below 20 % cannot be set.
▷
"Time slot": If a departure time is set, a
time frame for charging can be set, e.g.,
to charge using a cheap electricity rate.
Set charge target
1.
Apps menu
2. "Vehicle"
Charging in the time frame
3. "Charging"
4. "Charging target"
5. Select the desired setting.
General information
A time frame can be set for the charging proc-
ess, e.g., to charge with a cheap electricity rate.
Permissible volume of DC charging
The vehicle can also start the charging process
before the selected time frame begins or end
it after the selected time frame finishes. The
starting point of the charging process is ad-
justed so the vehicle can be as fully charged as
possible and, if applicable, its climate adjusted
by the departure time.
When the vehicle is charged at a DC charging
station, the noise emission during the charging
process can be limited, for instance to comply
with the local noise level restrictions. A limita-
tion of the noise emission can lead to longer
charging times.
1.
Apps menu
Functional requirement
A departure time is defined.
2. "Vehicle"
3. "Charging"
4. "Fan loudness"
5. Select the desired setting.
Setting a time frame for charging
1.
Apps menu
2. "Vehicle"
3. "Charging"
325
Online Edition for Part no. 01405B37D97 - II/24
Charging the vehicle
MOBILITY
instrument cluster, if standby state is switched
on.
Stopping the charging process
The charging process can be stopped at any
time by removing the charging cable and con-
tinued at a later time by connecting the charg-
ing cable. For example, so that other people
can use the electrical connection in the mean-
time, or in order to avoid excessive strain on
the electrical connection.
Information regarding the charging process is
shown on the charging screen.
Display Meaning
Charging the vehicle with a Mode 2
charging cable or Mode 3 charging
cable.
Additional information:
Charging the vehicle with a DC
charging cable.
Detach, refer to page 320.
Continuing the charging process
Current charging capacity.
If the charging process is interrupted, for in-
stance due to a temporary power failure, the
charging process will continue automatically
after the interruption.
Icon indicates that the maximum
charging capacity of the vehicle has
been reached.
When the vehicle is charged at a public charg-
ing station, the charging process may not con-
tinue automatically after an interruption.
Maximum charging current strength
or currently set current limit.
Charging cable locked.
Charging cable unlocked.
Set charge target.
Ending the charging process
1. Remove the charging cable from the vehi-
cle.
Detach, refer to page 320.
2. Stow the charging cable as required.
3. Press the charging socket flap closed until it
engages.
Departure time set.
4. Lock vehicle if it is unlocked.
Goodbye screen on control display
One-time departure time set.
When drive-ready state is switched off, a menu
is shown on the control display, in which,
among other things, some settings can be ap-
plied for charging via iDrive.
Climate control activated at depar-
ture time.
Flashing: ventilation or cooling ac-
tive.
Displays in the instrument
cluster
Flashing: heating active.
The charge state indicator light shows the
charge state of the high-voltage battery in the
326
Online Edition for Part no. 01405B37D97 - II/24
