Deutsch
EnglishCharging the vehicle -> Displays in the instrument cluster for your BMW i5 2023-2025
Charging the vehicle
MOBILITY
instrument cluster, if standby state is switched
on.
Stopping the charging process
The charging process can be stopped at any
time by removing the charging cable and con-
tinued at a later time by connecting the charg-
ing cable. For example, so that other people
can use the electrical connection in the mean-
time, or in order to avoid excessive strain on
the electrical connection.
Information regarding the charging process is
shown on the charging screen.
Display Meaning
Charging the vehicle with a Mode 2
charging cable or Mode 3 charging
cable.
Additional information:
Charging the vehicle with a DC
charging cable.
Detach, refer to page 320.
Continuing the charging process
Current charging capacity.
If the charging process is interrupted, for in-
stance due to a temporary power failure, the
charging process will continue automatically
after the interruption.
Icon indicates that the maximum
charging capacity of the vehicle has
been reached.
When the vehicle is charged at a public charg-
ing station, the charging process may not con-
tinue automatically after an interruption.
Maximum charging current strength
or currently set current limit.
Charging cable locked.
Charging cable unlocked.
Set charge target.
Ending the charging process
1. Remove the charging cable from the vehi-
cle.
Detach, refer to page 320.
2. Stow the charging cable as required.
3. Press the charging socket flap closed until it
engages.
Departure time set.
4. Lock vehicle if it is unlocked.
Goodbye screen on control display
One-time departure time set.
When drive-ready state is switched off, a menu
is shown on the control display, in which,
among other things, some settings can be ap-
plied for charging via iDrive.
Climate control activated at depar-
ture time.
Flashing: ventilation or cooling ac-
tive.
Displays in the instrument
cluster
Flashing: heating active.
The charge state indicator light shows the
charge state of the high-voltage battery in the
326
Online Edition for Part no. 01405B37D97 - II/24
Charging the vehicle
MOBILITY
The following settings are possible for depar-
ture time:
Display Meaning
Blue icon: Charging capacity re-
▷
▷
Climate control for departure time.
duced due to low temperature of
the high-voltage battery.
Scheduling of up to three regular departure
times.
White icon: Charging capacity re-
duced due to high temperature of
the high-voltage battery.
▷
Planning a one-time departure time.
Climate control for departure time
Battery thermal management ac-
tive.
1.
Apps menu
2. "Vehicle"
Charging station charging power
may be restricted or not available.
3. "Charging"
4. "Departure plan"
5. "Pre-conditioning for departure"
Setting the departure time
1.
Apps menu
2. "Vehicle"
3. "Charging"
4. "Departure plan"
5. Select the desired departure time.
6. Set the time and weekday.
The shaded area indicates a limitation in the
charging capacity that can occur, for instance
due to the connected charging infrastructure.
Activating the departure time
1.
Apps menu
Additional information:
2. "Vehicle"
▷
▷
Charge state indicator, refer to page 160
Charging screen, refer to page 156.
3. "Charging"
4. "Departure plan"
5. Activate the desired departure time.
The set departure time will be deactivated if
the departure time was ignored three times in
a row.
Departure time
Principle
For optimum range and climate control, the
departure time can be set before parking the
vehicle.
Climate control
The following settings for vehicle air condition-
ing are possible:
General information
With a set departure time, the vehicle is pre-
heated or precooled if climate control is set.
▷
Activate stationary climate control immedi-
ately.
327
Online Edition for Part no. 01405B37D97 - II/24
