Deutsch
EnglishCharging the vehicle -> Charging status display for your BMW i5 2023-2025
Charging the vehicle
MOBILITY
Connecting the charging cable, refer to
page 319.
Activating/deactivating manually
The high-voltage battery preheating/precool-
ing can be activated and deactivated manually.
6. Lock vehicle if it is unlocked.
After the charging cable connector is plug-
ged into the high-voltage charging socket, the
charging cable is locked automatically.
1.
Apps menu
2. "Vehicle"
3. "Charging"
Charging status display
4. "Pre-condition battery"
5. Select the desired setting.
Indicator light on the charging socket
The availability of this function is affected by
certain factors. Manual activation is not possi-
ble in the following situations, for example:
▷
▷
The remaining range is too low.
The high-voltage battery's charge is too
high.
▷
Automatic preparation of the high-voltage
battery is on.
▷
▷
The vehicle is charging.
Max Range mode is on.
The charging status is indicated on the indica-
tor light on the charging socket.
A time display indicates how long it will take
for the high-voltage battery to reach the target
temperature. Depending on current energy re-
quirements, the time shown may differ from
the actual time.
Charging status
Light
Meaning
White
Charging cable can be con-
nected.
Starting the charging process
1. Engage selector lever position P. Set the
parking brake, if needed.
Yellow
Charging cable is locked.
2. Set charging mode or schedule charging
process.
Flashing yel- Charging process is being
low
prepared.
Scheduling the charging process, see
Charging in the time frame, refer to
page 325.
Blue
Charging process paused.
Flashing blue Charging process is active.
Flashing red Fault in the charging process.
3. Switch off drive-ready state.
4. Connect the Mode 2 charging cable to
the domestic socket outlet or the Mode 3
charging cable to the port at the AC charg-
ing station as needed.
Green
Charging process is complete.
When the vehicle is locked, the indicator light
goes out after some time.
5. Connect the charging cable to the vehicle.
When the vehicle is unlocked, the blue indica-
tor light flashes continuously. The other indica-
tor lights turn off after some time.
324
Online Edition for Part no. 01405B37D97 - II/24
Charging the vehicle
MOBILITY
Press the button on the vehicle key to
4. "Charging mode"
5. "Time slot"
check the charging state. The charging status
is indicated on the indicator light. In some
cases the vehicle is locked.
6. Select the desired setting.
Additional messages about charging status
can be shown on the instrument cluster or on
the mobile device using the My BMW App.
Charge target
Principle
A target value in percent can be set for charg-
ing the high-voltage battery.
Setting the charging mode
1.
Apps menu
When a lower target value is set, the charging
time may be shortened.
2. "Vehicle"
3. "Charging"
General information
A target value of 80 % is recommended for
fast charging and optimal service life of the
high-voltage battery.
4. "Charging mode"
5. Select the desired settings:
▷
"Immediately": the charging process
starts as soon as the charging cable is
connected.
Target values below 20 % cannot be set.
▷
"Time slot": If a departure time is set, a
time frame for charging can be set, e.g.,
to charge using a cheap electricity rate.
Set charge target
1.
Apps menu
2. "Vehicle"
Charging in the time frame
3. "Charging"
4. "Charging target"
5. Select the desired setting.
General information
A time frame can be set for the charging proc-
ess, e.g., to charge with a cheap electricity rate.
Permissible volume of DC charging
The vehicle can also start the charging process
before the selected time frame begins or end
it after the selected time frame finishes. The
starting point of the charging process is ad-
justed so the vehicle can be as fully charged as
possible and, if applicable, its climate adjusted
by the departure time.
When the vehicle is charged at a DC charging
station, the noise emission during the charging
process can be limited, for instance to comply
with the local noise level restrictions. A limita-
tion of the noise emission can lead to longer
charging times.
1.
Apps menu
Functional requirement
A departure time is defined.
2. "Vehicle"
3. "Charging"
4. "Fan loudness"
5. Select the desired setting.
Setting a time frame for charging
1.
Apps menu
2. "Vehicle"
3. "Charging"
325
Online Edition for Part no. 01405B37D97 - II/24
