Deutsch
EnglishTransporting children safely -> Installing child restraint systems for your BMW i4 2021-2025
Transporting children safely
CONTROLS
Safety information
Installing child restraint
systems
Warning
The seat belt cannot be fastened correctly
on children shorter than 5 ft/150 cm without
suitable additional child restraint systems.
The protective effect of safety gear, including
seat belts, can be limited or lost when seat
belts are fastened incorrectly. An incorrectly
fastened seat belt can cause additional inju-
ries, for instance in the event of an accident,
braking or evasive maneuvers. There is a risk
of injury or danger to life. Secure children
shorter than 5 ft/150 cm using suitable child
restraint systems.
General information
Pay attention to the specifications and the op-
erating and safety information of the child re-
straint system manufacturer when selecting,
installing, and using child restraint systems.
Safety information
Warning
The protective effect of child restraint sys-
tems and their fastening systems which have
been damaged or exposed to an accident
can be limited or lost. A child cannot be prop-
erly restrained in the event of an accident,
braking or evasive maneuvers. There is a risk
of injury or danger to life.
Children on the front passenger
seat
General information
When using a child restraint system on the
front passenger seat, make sure that the front
passenger airbag is deactivated.
Do not use child restraint systems which
have been damaged or exposed to an acci-
dent.
If attachment systems have been damaged
or strained by an accident, have them
checked and replaced by an authorized serv-
ice center or another qualified service center
or repair shop.
Additional information:
Automatic deactivation of front passenger air-
bag, refer to page 171.
Safety information
Warning
Warning
The stability of the child restraint system is
limited or compromised with incorrect seat
setting or improper installation of the child
seat. There is a risk of injury or danger to life.
Make sure that the child restraint system fits
securely against the backrest. If possible, ad-
just the backrest tilt for all affected backrests
and correctly adjust the seats. Make sure that
seats and backrests are securely engaged or
locked. If possible and necessary, adjust the
height of the head restraints or remove them.
Active front passenger airbags can injure a
child in a child restraint system when the air-
bags are deployed. There is a risk of injury.
Make sure that the front passenger airbags
are deactivated and that the PASSENGER
AIRBAG OFF indicator light illuminates.
118
Online Edition for Part no. 01405B45E30 - VI/24
Transporting children safely
CONTROLS
On the front passenger seat
Child seat security
Deactivating the airbag
Warning
Active front passenger airbags can injure a
child in a child restraint system when the air-
bags are deployed. There is a risk of injury.
Make sure that the front passenger airbags
are deactivated and that the PASSENGER
AIRBAG OFF indicator light illuminates.
The seat belts in the rear and the front pass-
enger seat belt can be permanently locked to
fasten child restraint systems.
After mounting a child restraint system on the
front passenger seat, make sure that the front
passenger airbag is deactivated.
Locking the seat belt
1. Pull out the seat belt strap completely.
Additional information:
Automatic deactivation of front passenger air-
bag, refer to page 171.
2. Secure the child restraint system with the
seat belt.
3. Allow the seat belt strap to be pulled in
and pull it tight against the child restraint
system. The seat belt is disabled.
Seat position and height
After installing a child restraint system, move
the front passenger seat as far back as it will
go and, if possible, bring it up to the highest
position. This seat position and height ensure
the best possible position for the belt and of-
fers optimal protection in the event of an acci-
dent.
Unlocking the seat belt
1. Unbuckle the seat belt buckle.
2. Remove the child restraint system.
3. Allow the seat belt strap to be pulled in
completely.
After mounting a universal child restraint sys-
tem, adjust the tilt of the seat backrest so that
the belt is not constrained.
Lower anchors for child
restraint systems
If the upper attachment point of the seat belt
is located in front of the seat belt guide of the
child seat, move the front passenger seat care-
fully forward until the best possible seat belt
guide position is reached.
General information
LATCH: Lower Anchors and Tether for Chil-
dren.
Backrest width
Pay attention to the specifications, operating
tips and safety instructions from the child re-
straint system manufacturer when selecting,
installing, and using child restraint systems.
Adjustable backrest width: Before installing a
child restraint system on the front passenger
seat, open the backrest width completely. Do
not change the backrest width again and do
not call up a memory position.
119
Online Edition for Part no. 01405B45E30 - VI/24
