Safety -> Forward Collision Warning with braking function for your BMW i4 2021-2025

Safety  
CONTROLS  
style is detected, warnings and brake interven-  
tions occur less frequently.  
Functional limitations  
The system may be limited in the following  
situations:  
Safety information  
Follow the safety information in Chapter For-  
ward Collision Mitigation.  
In tight curves.  
With limitation of the driving stability control  
systems.  
Up to 10 seconds after turning on drive-  
ready state using the Start/Stop button.  
Display in the instrument cluster  
If there is a risk of collision with a detected  
vehicle, a warning light is displayed.  
Also, do not use Forward Collision Mitigation  
when towing.  
Icon  
Meaning  
Forward Collision Warning with a de-  
tected vehicle.  
Forward Collision Warning  
with braking function  
Warning function  
The warning prompts the driver to intervene.  
Principle  
The Forward Collision Warning with braking  
function is a warning function that notifies the  
driver of a possible risk of collision and brakes  
automatically as necessary.  
Additional information:  
Forward Collision Mitigation, refer to page 174.  
In the event of an accident, the system helps  
by reducing impact speed.  
System limits  
General information  
Follow the system limits in the "Forward Colli-  
sion Mitigation" chapter.  
General information  
Detection range  
The following situations may not be detected,  
or only detected with a delay, for instance:  
Vehicle driving slowly in front and being ap-  
proached at high speed.  
Vehicles that suddenly swerve in front of  
you, or strongly decelerating vehicles.  
Sensors detect the traffic situation in their de-  
tection range.  
Vehicles with unusual rear designs.  
Two-wheeled vehicles ahead of you.  
The system issues a warning of a possible risk  
of collision with vehicles at speeds above ap-  
prox. 3 mph/5 km/h. The timing of warnings  
may vary with the current driving situation.  
Upper speed limit  
If the vehicle speed exceeds approx.  
155 mph/250 km/h, the system is deactivated  
temporarily. As soon as the speed drops below  
this value again, the system is reactivated.  
The system considers the driver’s vehicle han-  
dling when responding. If an active driving  
177  
Online Edition for Part no. 01405B45E30 - VI/24  
Safety  
CONTROLS  
Warning function  
The warning prompts the driver to intervene.  
Daytime Pedestrian  
Collision Mitigation  
Additional information:  
Forward Collision Mitigation, refer to page 174.  
Principle  
The Daytime Pedestrian Collision Mitigation is  
a warning function that notifies the driver of a  
possible risk of collision with pedestrians and  
cyclists and brakes automatically as neces-  
sary. The system issues warnings for speeds  
that are common in towns and cities.  
System limits  
General information  
Follow the system limits in the "Forward Colli-  
sion Mitigation" chapter.  
In the event of an accident, the system helps  
by reducing impact speed.  
Detection range  
General information  
The detection range in front of the vehicle is  
divided into two areas:  
Central area, arrow 1, directly in front of the  
vehicle.  
Sensors detect the traffic situation in their de-  
tection range.  
Extended area, arrows 2, to the right and  
left of the central area.  
The system issues a warning of a possible  
risk of collision with pedestrians or cyclists at  
speeds above approx. 3 mph/5 km/h.  
There is a risk of collision if persons, e.g.,  
pedestrians or cyclists, are located within the  
central area. A warning is issued about pedes-  
trians who are located within the extended  
area only if they are moving in the direction of  
the central area.  
Safety information  
Follow the safety information in Chapter For-  
ward Collision Mitigation.  
The following situations may not be detected,  
for instance:  
Display in the instrument cluster  
If there is a risk of collision with a detected pe-  
destrian or cyclist, a warning light is displayed.  
Partially covered pedestrians or bikes.  
Pedestrians that are not detected as such  
because of their contour or posture.  
Icon  
Meaning  
Risk of collision with a person, e.g., a  
pedestrian.  
Pedestrians who are too small for the sen-  
sors to detect.  
178  
Online Edition for Part no. 01405B45E30 - VI/24