Deutsch
EnglishSafety -> Daytime Pedestrian Collision Mitigation for your BMW i4 2021-2025
Safety
CONTROLS
Warning function
The warning prompts the driver to intervene.
Daytime Pedestrian
Collision Mitigation
Additional information:
Forward Collision Mitigation, refer to page 174.
Principle
The Daytime Pedestrian Collision Mitigation is
a warning function that notifies the driver of a
possible risk of collision with pedestrians and
cyclists and brakes automatically as neces-
sary. The system issues warnings for speeds
that are common in towns and cities.
System limits
General information
Follow the system limits in the "Forward Colli-
sion Mitigation" chapter.
In the event of an accident, the system helps
by reducing impact speed.
Detection range
General information
The detection range in front of the vehicle is
divided into two areas:
▷
Central area, arrow 1, directly in front of the
vehicle.
Sensors detect the traffic situation in their de-
tection range.
▷
Extended area, arrows 2, to the right and
left of the central area.
The system issues a warning of a possible
risk of collision with pedestrians or cyclists at
speeds above approx. 3 mph/5 km/h.
There is a risk of collision if persons, e.g.,
pedestrians or cyclists, are located within the
central area. A warning is issued about pedes-
trians who are located within the extended
area only if they are moving in the direction of
the central area.
Safety information
Follow the safety information in Chapter “For-
ward Collision Mitigation”.
The following situations may not be detected,
for instance:
Display in the instrument cluster
If there is a risk of collision with a detected pe-
destrian or cyclist, a warning light is displayed.
▷
▷
Partially covered pedestrians or bikes.
Pedestrians that are not detected as such
because of their contour or posture.
Icon
Meaning
Risk of collision with a person, e.g., a
pedestrian.
▷
Pedestrians who are too small for the sen-
sors to detect.
178
Online Edition for Part no. 01405B45E30 - VI/24
Safety
CONTROLS
The system warns of a possible risk of colli-
sion with vehicles at speeds above approx.
6 mph/10 km/h.
Upper speed limit
Depending on the vehicle equipment, the
system responds to pedestrians and cyclists
when your vehicle speed is less than approx.
50 mph/80 km/h.
The timing of warnings may vary with the cur-
rent driving situation.
Safety information
Follow the safety information in Chapter “For-
ward Collision Mitigation”.
Intersection Collision
Warning with city braking
function
Display in the instrument cluster
If there is a risk of collision with a detected
vehicle, a warning light is displayed.
Principle
The Intersection Collision Warning with city
braking function is a warning function that
helps prevent accidents with cross traffic at in-
tersections and junctions. At speeds that are
common in towns and cities, the system warns
the driver of a possible risk of collision and
brakes automatically if necessary.
Icon
Meaning
Risk of collision with vehicle crossing
from the right.
Risk of collision with vehicle crossing
from the left.
In the event of an accident, the system helps
by reducing impact speed.
Risk of collision with vehicle for which
the driving direction cannot be deter-
mined.
General information
Warning function
The warning prompts the driver to intervene.
Additional information:
Forward Collision Mitigation, refer to page 174.
System limits
General information
Follow the system limits in the "Forward Colli-
sion Mitigation" chapter.
Sensors detect the traffic situation in their de-
tection range.
Vehicles crossing your driving direction can be
detected by the system as soon as these vehi-
cles enter into detection range of the sensors.
Detection range
The following situations may not be detected,
for instance:
At intersections and junctions, a warning is is-
sued when a risk of collision with crossing traf-
fic is detected.
▷
Crossing vehicles when they are hidden,
e.g. by buildings.
▷
Vehicles with an unusual side view.
179
Online Edition for Part no. 01405B45E30 - VI/24
