Deutsch
EnglishParking -> Side view for your BMW i4 2021-2025
Parking
CONTROLS
Display
Turning the automatic camera
perspective on/off
Turning the camera view on/off
automatically
When the parking assistance systems' display
is turned on, automatic camera perspective is
selected automatically.
The icon in the selection window is selected
automatically.
To protect the sides of the vehicle, obstacle
markings are displayed on the sides of the ve-
hicle.
To exit the steering-dependent camera view,
select another camera view in the selection
window.
▷
▷
No markings: no obstacles detected.
Turning the camera view on/off
manually
Color marks: warning against detected ob-
stacles.
System limits
1.
Press the button.
The system only displays stationary obstacles
that were previously detected by sensors while
passing them.
2.
Select the icon in the selection window.
To exit the steering-dependent camera
view, select another camera view in the se-
lection window.
The system does not detect whether an obsta-
cle moves later on. For this reason, at stand-
still, the marks are not shown anymore in the
display after a certain time. The area next to
the vehicle must be newly captured.
Side protection
Principle
The side Park Distance Control is automati-
cally displayed when the automatic camera
perspective is turned on. The function shows
obstacles located next to the vehicle.
Side view
Principle
Side view shows the vehicle's side surround-
ings, making it easier to position the vehicle at
the curb or with other obstacles on the side.
The side view looks from rear to front and, in
case of danger, focuses automatically on pos-
sible obstacles.
General information
Follow the information in the "Parking assis-
tance systems" chapter.
233
Online Edition for Part no. 01405B45E30 - VI/24
Parking
CONTROLS
Turning the side view on/off
The selection window lets you choose the side
view for the left or right side of the vehicle.
General information
Follow the information in the "Parking assis-
tance systems" chapter.
Turning the car wash view on/off
1.
Press the button.
2.
Select the icon for the desired vehicle
side in the selection window.
1.
Press the button.
"Car wash"
2.
To exit the side view, select another cam-
era view in the selection window.
To exit the car wash view, select a different
camera view in the left toolbar.
3D view
Display
Principle
With 3D view, a circle is displayed around the
vehicle top view in the selection window.
Specified perspectives can be selected on the
circle.
General information
The current perspective is marked with a cam-
era icon.
Your own lane is displayed for easier driving
into a car wash.
Follow the information in the "Parking assis-
tance systems" chapter.
This view can be used to position the vehicle
correctly within the washing system guide rails.
Turning the 3D view on/off
In a car wash, the vehicle must be able to roll
freely forward.
Additional information:
1.
Press the button.
"3D view"
Rolling or pushing the vehicle, refer to
page 126.
2.
To exit the 3D view, select another camera
view on the left toolbar.
Panorama View
Car wash view
Principle
The panoramic view gives you an earlier view
of crossing traffic at blind driveway exits and
intersections.
Principle
The car wash view helps when driving into a
car wash.
234
Online Edition for Part no. 01405B45E30 - VI/24
