Deutsch
EnglishParking -> Panorama View for your BMW i4 2021-2025
Parking
CONTROLS
Turning the side view on/off
The selection window lets you choose the side
view for the left or right side of the vehicle.
General information
Follow the information in the "Parking assis-
tance systems" chapter.
Turning the car wash view on/off
1.
Press the button.
2.
Select the icon for the desired vehicle
side in the selection window.
1.
Press the button.
"Car wash"
2.
To exit the side view, select another cam-
era view in the selection window.
To exit the car wash view, select a different
camera view in the left toolbar.
3D view
Display
Principle
With 3D view, a circle is displayed around the
vehicle top view in the selection window.
Specified perspectives can be selected on the
circle.
General information
The current perspective is marked with a cam-
era icon.
Your own lane is displayed for easier driving
into a car wash.
Follow the information in the "Parking assis-
tance systems" chapter.
This view can be used to position the vehicle
correctly within the washing system guide rails.
Turning the 3D view on/off
In a car wash, the vehicle must be able to roll
freely forward.
Additional information:
1.
Press the button.
"3D view"
Rolling or pushing the vehicle, refer to
page 126.
2.
To exit the 3D view, select another camera
view on the left toolbar.
Panorama View
Car wash view
Principle
The panoramic view gives you an earlier view
of crossing traffic at blind driveway exits and
intersections.
Principle
The car wash view helps when driving into a
car wash.
234
Online Edition for Part no. 01405B45E30 - VI/24
Parking
CONTROLS
Depending on the engaged selector lever posi-
tion, the camera view of the rearview camera
or front camera will be displayed.
General information
Road users concealed by obstacles to the left
and right of the vehicle can only be detected
relatively late from the driver's seat. The front
camera and rearview camera capture the area
around the side of the vehicle to improve the
driver's view.
Automatic activation of panorama
view
This function can be turned on automatically
by saving activation points.
Principle
Positions at which panorama view should
switch on automatically can be saved as acti-
vation points.
The camera image shows different levels of
distortion in some areas and is thus not suita-
ble for distance estimations.
Depending on vehicle equipment, the function
can be used when driving forward or in re-
verse.
General information
Up to ten activation points can be stored.
The activation points can be used when driv-
ing forward and, depending on national-mar-
ket version, when reversing.
Follow the information in the "Parking assis-
tance systems" chapter.
Follow instructions in the Parking assistance
systems chapter.
Sensors
The system is controlled by the following cam-
eras:
Functional requirements
▷
▷
Rearview camera.
Front camera.
▷
A GPS signal must be received.
▷
Depending on national-market version: A
BMW ID or driver profile must be activated.
Turning the panoramic view on/off
▷
▷
The reversing camera and front camera
must be installed.
Press the button.
The direction of travel, selector lever posi-
tion, and vehicle angle must correspond to
a stored activation point.
Display
Storing activation points
1. Drive your vehicle to the location where you
want the system to turn on, then stop.
2.
Press the button.
3. "Activation point"
The current position is displayed.
4. "Save activation point"
Yellow lines on the screen display identify the
bumpers of your own vehicle.
Activation points are stored with one of the
following pieces of information if possible:
235
Online Edition for Part no. 01405B45E30 - VI/24
Parking
CONTROLS
▷
▷
▷
With the city/town.
General information
Follow the information in the "Parking assis-
tance systems" chapter.
With the city/town and the street.
With the GPS coordinates.
Display
Using activation points
The use of activation points can be switched
on and off.
1.
Press the button.
2. "Settings"
3. "GPS-based"
Displaying activation points
The maximum opening angle of the doors is
displayed in selector lever position P.
1.
Press the button.
2. "Manage points"
System limits
The system does not provide a warning of ap-
proaching road users.
A list of all activation points is displayed.
Editing activation points
The vehicle's surroundings are distorted in the
display for technical reasons.
1.
Press the button.
Even if the door opening angle indicator on the
control display does not overlap with any other
objects, it is necessary to park carefully next to
other objects.
2. "Manage points"
A list of all activation points is displayed.
3. Select an activation point as needed.
4. Select the desired setting.
Because of the perspective, higher, protruding
objects may be closer than they appear on the
control display.
Door opening angle
Remote 3D View
Principle
Depending on vehicle equipment, the door
opening angle display is shown automatically
when stationary.
Principle
The My BMW App and camera views in park-
ing view such as automatic camera perspec-
tive enable you to display the vehicle’s sur-
roundings on a mobile device.
This display helps estimate how far the doors
can be opened when parking.
If obstacle marking is activated, the parking
view indicates fixed obstacles that obstruct the
opening angles of the doors.
The function displays a snapshot of the situa-
tion.
236
Online Edition for Part no. 01405B45E30 - VI/24
