Deutsch
EnglishDisplays for your BMW i4 2021-2025
Displays
CONTROLS
Displays
thorized service center or another qualified
service center or repair shop.
Vehicle features and options
This chapter describes model-specific equip-
ment, systems, and functions that are currently
available, or may become available in the fu-
ture, even if they are not present in the vehicle.
Overview
Additional information:
Vehicle equipment, refer to page 8.
Instrument cluster
Principle
The instrument cluster comprises various digi-
tal displays, e.g., a speedometer, time, range,
temperature as well as indicator and warning
lights.
Instrument cluster
Display ranges on the instrument
cluster
General information
The layout of the instrument cluster adapts to
the respective driving mode. The positions of
some displays may vary, e.g., the selector lever
display.
Some of the displays in the instrument cluster
may differ from the illustrations in the Owner's
Manual.
1
Speedometer
Safety information
2
3
4
Driver assistance systems 203
Driver Attention Camera 197
Check Control 139
Warning
If the driving information displays on the in-
strument cluster fail, e.g., the speedometer,
do not use the vehicle. There is a risk of
accident, injury, and property damage. Imme-
diately park the vehicle in a safe manner.
Turning drive-ready state off and on again
may correct the malfunction, allowing you to
continue driving. If the malfunction cannot be
corrected, have the vehicle checked by an au-
Selector lever display 124
Selection lists 147
Using eDRIVE efficiently 282
Power gauge 148
5
6
7
Range 149
Selector lever position 124
Outside temperature 150
136
Online Edition for Part no. 01405B45E30 - VI/24
Displays
CONTROLS
Select the menu using the arrow buttons on
the steering wheel where applicable.
8
9
Charging screen 150
Central display range 151
Drive mode 130
3. Select the desired setting using the knurled
wheel on the steering wheel.
10 Speed Limit Info 203
Speed Limit Assistant 217
11 Time 154
Settings
Specific displays can be configured individu-
ally, e.g., a second actual speed.
12 High-voltage battery charge state indicator
154
1.
Apps menu
2. "Vehicle"
Additional information:
3. "Displays"
Indicator/warning lights, refer to page 140.
4. "Instrument cluster"
5. Select the desired setting.
Operating elements on the steering
wheel
Live Vehicle
Operating
element
Function
Principle
Display the menu bar on the
instrument cluster.
Live Vehicle is a virtual representation of your
vehicle with different information, e.g., vehicle
status or current driving condition.
Press the corresponding arrow
key to move the selection.
General information
Turn knurled wheel: scroll se-
lection up or down.
Corresponding information is shown on the
control display depending on the driving situa-
tion. Fault statuses are not taken into account.
Adaptive content or various static content can
be selected.
Press knurled wheel: confirm
selection.
Configuring the layout
In COMFORT drive mode, the layout in the in-
strument cluster can be individually configured
and displayed.
Adaptive content
The following content is displayed in alternat-
ing order and, if necessary, depending on the
selected drive mode:
▷
▷
▷
▷
▷
Vehicle status, refer to page 155.
Current driving condition, refer to page 155.
Sport displays, refer to page 156.
Driving style analysis, refer to page 283.
Trip data, refer to page 151.
1.
Press the button on the steering
wheel.
A menu bar is displayed in the instrument
cluster.
2. "LAYOUT"
137
Online Edition for Part no. 01405B45E30 - VI/24
Displays
CONTROLS
Adjusting the display
Overview
In the Live Vehicle menu, adaptive content or
various static content for the display can be
selected on the left-hand side bar:
1.
Apps menu
2. "Vehicle"
3. "Live Vehicle"
4. Select the desired setting.
Head-up display views are projected onto the
windshield through a protective glass. The pro-
tective glass is located between the steering
wheel and windshield.
BMW Head-up display
Principle
The Head-up display projects important infor-
mation, e.g., speed, onto the windshield in the
driver's field of view. Information can be re-
corded without you having to look away from
the road.
Displayable information
The following information is displayed on the
Head-up display:
▷
▷
▷
▷
▷
▷
Vehicle speed.
The steering wheel buttons can be used to
configure various views for the Head-up dis-
play. More settings can be configured on the
control display, e.g., brightness, height, or rota-
tion.
Navigation instructions.
Check Control messages.
Sport displays.
Lists and messages.
Driver assistance systems.
General information
Follow instructions for cleaning the Head-up
display in the Vehicle Care chapter.
Some of this information is only displayed
briefly as needed.
Additional information:
Configuring a view
The views for the Head-up display can be set
independently of the display on the instrument
cluster, e.g., a reduced view.
Caring for special components, refer to
page 352.
1.
Press the button on the steering
wheel.
A menu bar is displayed in the instrument
cluster.
2. "HEAD-UP"
138
Online Edition for Part no. 01405B45E30 - VI/24
Displays
CONTROLS
Select the menu using the arrow buttons on
the steering wheel where applicable.
Special windshield
The windshield is part of the system.
3. Select the desired setting using the knurled
wheel on the steering wheel.
The shape and coating of the special wind-
shield enable the system to function.
If damaged, have the special windshield re-
placed by an authorized service center or an-
other qualified service center or repair shop.
Turning the Head-up display on/off
1.
Apps menu
2. "Vehicle"
3. "Displays"
Check Control
4. "Head-up display"
5. "Head-up display"
Principle
The Check Control system monitors functions
in the vehicle and notifies you of faults in the
monitored systems.
Settings
Various settings can be configured for the
Head-up display, e.g., height, brightness, or
rotation. In addition, individual displays in the
Head-up display can be set up separately such
as for Driver Assistance.
A Check Control message is displayed as
a combination of indicator lights or warning
lights and text messages on the instrument
cluster and, if applicable, on the Head-up dis-
play. In addition, an acoustic signal may sound
and a text message may appear on the control
display.
1.
Apps menu
2. "Vehicle"
3. "Displays"
Some Check Control messages are hidden au-
tomatically after approx. 20 seconds, but they
will be stored. Stored Check Control messages
can be displayed on the control display. Urgent
Check Control messages are permanently dis-
played but may be hidden temporarily.
4. "Head-up display"
5. Select the desired setting.
Visibility of the display
The visibility of the displays in the Head-up
display is influenced by the following factors:
Hiding Check Control messages
▷
▷
Seat position.
Permanently displayed Check Control mes-
sages can be hidden temporarily. These mes-
sages are automatically displayed again after
approx. 8 seconds.
Objects on the Head-up display's protective
glass.
▷
Dust or dirt on the Head-up display's pro-
tective glass.
An arrow icon next to the Check Control
message indicates whether the Check Control
message can be hidden.
▷
▷
▷
▷
Windshield dirty on inside or outside.
Sunglasses with certain polarization filters.
Wet road.
To hide Check Control messages, press
the left arrow button on the steering
wheel.
Unfavorable light conditions.
If the image is distorted, have the basic set-
tings checked by an authorized service center
or another qualified service center or repair
shop.
139
Online Edition for Part no. 01405B45E30 - VI/24
Displays
CONTROLS
Displaying stored Check Control
messages
Additional information such as the cause of a
fault or the required action can be called up via
Check Control.
Indicator lights and warning
lights
Principle
The indicator lights and the warning lights on
the instrument cluster show the status of some
functions in the vehicle. The indicator lights
and warning lights indicate faults in monitored
systems.
Depending on the Check Control message, fur-
ther help can be selected.
1.
Apps menu
2. "Vehicle"
3. "Vehicle status"
General information
Indicator lights and warning lights can illumi-
nate in a variety of combinations and colors.
4. "Check Control"
5. Select the desired text message.
Several of the lights are checked for proper
functioning and illuminate temporarily when
drive-ready state is turned on.
Display
A Check Control message is displayed in the
instrument cluster as a text message with an
icon.
Red lights
For urgent messages, an added text is auto-
matically displayed on the control display.
Seat belt reminder
If several faults occur at once, the messages
are displayed consecutively.
Seat belt on the driver's seat is not
buckled.
Certain messages displayed while driving are
displayed again after drive-ready state is
switched off.
Additional information:
Seat belt reminder, refer to page 108.
Icons in the instrument cluster indicate
an active or saved Check Control mes-
sage.
Airbag system
Warning light illuminates briefly: indi-
cates that the entire airbag system and
seat belt tensioners are operational
when drive-ready state is switched on.
Warning light does not illuminate or illuminates
continuously: the airbag system or the seat
belt tensioners may not be operational. Have
the vehicle checked immediately by an author-
ized service center or another qualified service
center or repair shop.
Additional information:
Airbags, refer to page 169.
140
Online Edition for Part no. 01405B45E30 - VI/24
Displays
CONTROLS
Parking brake
Forward Collision Warning
The parking brake is set.
Warning light illuminates: risk of colli-
sion, e.g., with a vehicle, is detected.
Increased awareness is required.
Additional information:
Parking brake, refer to page 132.
Warning light flashes and a signal sounds: risk
of imminent collision with a vehicle detected.
Immediately initiate braking or an evasive ma-
neuver.
Brake system
The brake pads are worn or there is
another issue with the brake system.
Additional information:
The braking assistance may not be op-
erational. A higher pedal force may be
required for braking.
Forward Collision Warning with braking func-
tion, refer to page 177.
Have the vehicle checked immediately by an
authorized service center or another qualified
service center or repair shop.
Intersection Collision Warning: vehicle
detected from the right
Warning light illuminates: risk of colli-
sion with vehicle crossing from the right
detected. Increased awareness is re-
quired.
System fault
Contact an authorized service center or
another qualified service center or re-
pair shop.
Warning light flashes and a signal sounds: risk
of imminent collision with a crossing vehicle
detected. Immediately initiate braking or an
evasive maneuver.
Emergency Stop Assistant
Additional information:
The Emergency Stop Assistant is trig-
gered.
Intersection Collision Warning with city braking
function, refer to page 179.
Additional information:
Emergency Stop Assistant, refer to page 189.
Intersection Collision Warning: vehicle
detected from the left
Pedestrian Warning
Warning light illuminates: risk of colli-
sion with vehicle crossing from the left
detected. Increased awareness is re-
quired.
Warning light illuminates: risk of colli-
sion with a person, e.g., a pedestrian
or a cyclist. Increased awareness is re-
quired.
Warning light flashes and a signal sounds: risk
of imminent collision with a crossing vehicle
detected. Immediately initiate braking or an
evasive maneuver.
Warning light flashes and a signal sounds: risk
of imminent collision with a person, e.g., a pe-
destrian or a cyclist. Immediately initiate brak-
ing or an evasive maneuver.
Additional information:
Additional information:
Intersection Collision Warning with city braking
function, refer to page 179.
Daytime Pedestrian Collision Mitigation, refer
to page 178.
141
Online Edition for Part no. 01405B45E30 - VI/24
Displays
CONTROLS
It is possible that the system will not execute
any supporting steering movements.
Intersection Collision Warning: vehicle
from undetectable direction of travel
Grab the steering wheel with your hands.
Additional information:
Warning light illuminates: risk of colli-
sion with vehicle from unrecognizable
direction of travel detected. Increased
awareness is required.
Steering Assistant, refer to page 220.
Warning light flashes and a signal sounds: risk
of imminent collision with a vehicle detected.
Immediately initiate braking or an evasive ma-
neuver.
Yellow lights
Antilock Braking System
The system may not be operational.
The Antilock Braking System is not
available.
Additional information:
Intersection Collision Warning with city braking
function, refer to page 179.
The ability to steer may be restricted
during full braking.
Active Cruise Control with Distance
Control
Have the vehicle checked immediately by an
authorized service center or another qualified
service center or repair shop.
Warning light flashes and acoustic sig-
nal sounds: Brake and evade as neces-
sary.
Additional information:
Antilock Braking System, refer to page 199.
Additional information:
Active Cruise Control with Distance Control, re-
fer to page 210.
Steering Assistant
Warning light illuminates and acoustic
signal may sound: A system interrup-
tion is imminent.
Steering Assistant
Depending on national-market version:
The warning light flashes or illumi-
nates. A signal sounds:
Warning light flashes: Lane boundary has
been crossed.
Additional information:
The system is switched off.
Additional information:
Steering Assistant, refer to page 220.
Steering Assistant, refer to page 220.
Steering and Lane Control Assistant:
hands not on steering wheel
Steering and Lane Control Assistant:
hands not on steering wheel
Hands are not grasping the steering
wheel. The system is still active.
Warning light illuminates and acoustic
signal sounds:
Grab the steering wheel with your
hands.
Hands are not grasping the steering
wheel. System interruption is imminent.
Additional information:
Steering Assistant, refer to page 220.
The system reduces the speed to a standstill if
applicable.
142
Online Edition for Part no. 01405B45E30 - VI/24
Displays
CONTROLS
Dynamic Stability Control
Tire pressure monitor
Warning light flashes: Dynamic Stabil-
ity Control is regulating the driving and
brake power. The vehicle is stabilized.
Reduce the vehicle speed and adjust your driv-
ing style to the road conditions.
Warning light illuminates: Flat tire or
tire pressure loss has been detected.
Follow the information in the Check
Control message.
Warning light flashes then illuminates continu-
ously: Flat tires or tire pressure losses cannot
be detected.
Warning light illuminates: Dynamic Stability
Control has malfunctioned or is initializing.
Driving stabilization is restricted or has failed.
▷
▷
▷
▷
Fault caused by systems or devices with
the same radio frequency: after leaving the
area of the interference, the system auto-
matically becomes active again.
If the warning light illuminates continuously,
have the vehicle checked immediately by an
authorized service center or another qualified
service center or repair shop.
In the case of tires with special appro-
val: the tire pressure monitor was unable
to complete the reset. Reset the system
again.
Additional information:
Dynamic Stability Control, refer to page 199.
Wheel without wheel electronics installed:
Have it checked by an authorized service
center or another qualified service center or
repair shop as needed.
The Dynamic Stability Control
deactivated or the Dynamic Traction
Control activated
Dynamic Stability Control is deactivated
or Dynamic Traction Control is acti-
vated.
Malfunction: have the vehicle checked by
an authorized service center or another
qualified service center or repair shop.
Additional information:
Additional information:
▷
Dynamic Stability Control, refer to
page 199.
Tire pressure monitor, refer to page 316.
▷
Dynamic Traction Control, refer to
page 201.
Steering system
The steering system may not be op-
erational.
Flat tire monitor
Have the vehicle checked by an author-
ized service center or another qualified service
center or repair shop.
Warning light illuminates: Flat tire or
tire pressure loss has been detected.
Reduce your speed and stop cau-
tiously. Avoid sudden braking and steering
maneuvers.
Acoustic pedestrian protection
Acoustic pedestrian protection has
malfunctioned. Increased caution when
maneuvering.
Additional information:
Flat tire monitor, refer to page 323.
If malfunctioning repeatedly, have the vehicle
checked by an authorized service center or an-
other qualified service center or repair shop.
Additional information:
143
Online Edition for Part no. 01405B45E30 - VI/24
Displays
CONTROLS
Acoustic pedestrian protection, refer to
page 123.
Automatic High Beam Assistant, refer to
page 158.
Charging capacity limited
Lane departure warning
Additional information:
Depending on vehicle equipment and
national-market version:
Charge vehicle, refer to page 286.
The indicator light illuminates: the sys-
tem is switched on. At least one lane boundary
has been detected on one side of the vehicle.
The system is ready to intervene and issue
warnings. The system can perform steering in-
terventions.
Green lights
Turn signal
Turn signal is on.
Indicator light flashes: the system is perform-
ing a steering intervention.
Unusually rapid flashing of the indicator
light indicates that a turn signal bulb
has failed.
Additional information:
Additional information:
Lane departure warning, refer to page 181.
Turn signal, refer to page 157.
Automatic Hold is activated
Parking lights
After stopping, Automatic Hold auto-
matically secures the vehicle to prevent
it from rolling away.
Parking lights are switched on.
Additional information:
Additional information:
Parking lights, low-beam headlights,
refer to page 160.
Automatic Hold, refer to page 133.
Automatic Hold holding the vehicle
Low-beam headlights
Automatic Hold secures the stopped
vehicle to prevent it from rolling away,
e.g., when stopped at a traffic light.
Low-beam headlights are switched on.
Additional information:
Parking lights, low-beam headlights,
refer to page 160.
Additional information:
Automatic Hold, refer to page 133.
Automatic High Beam Assistant
Manual Speed Limiter
Low-beam headlights are switched on
and the Automatic High Beam Assis-
tant is activated.
The indicator light illuminates: the sys-
tem is switched on.
The indicator light flashes: the set
speed limit has been exceeded.
High-beam headlights are switched on and
off automatically depending on the traffic sit-
uation.
Additional information:
Additional information:
Manual Speed Limiter, refer to page 205.
144
Online Edition for Part no. 01405B45E30 - VI/24
Displays
CONTROLS
Steering Assistant, refer to page 220.
Cruise Control
The system is active.
Lane Change Assistant: lane change in
progress
Additional information:
Cruise control, refer to page 207.
Arrow icon for lane change green: the
system carries out a lane change.
Active Cruise Control with Distance
Control
Additional information:
Lane Change Assistant, refer to page 225.
Indicator light illuminates: Vehicle has
been detected ahead of you. The vehi-
cle icon goes out if no vehicle has been
detected ahead of you.
Lane Change Assistant: lane change
not possible
Indicator light flashes: Preceding vehicle has
driven off.
Gray line for lane boundary on the ap-
propriate side: system detected a lane
change request. Lane change not cur-
rently possible.
Additional information:
Active Cruise Control with Distance Control, re-
fer to page 210.
Additional information:
Lane Change Assistant, refer to page 225.
Speed Limit Assistant activated
Lane Change Assistant: functional
requirements not met
Depending on vehicle equipment, the
indicator light illuminates green, to-
gether with the icon for a speed control
system. Speed Limit Assistant is active and
detected speed limits can be applied manually
for the displayed system.
Depending on the national-market ver-
sion:
Arrow icon for lane change gray: lane
change not possible; functional requirements
not met.
Additional information:
Speed Limit Assistant, refer to page 217.
Additional information:
Lane Change Assistant, refer to page 225.
Speed Limit Assist: Apply speed limit
The detected speed limit can be ap-
plied with the SET button. As soon as
the speed limit has been applied, a
green checkmark is displayed.
Assisted Driving Mode Plus
The system is active.
Additional information:
Assisted Driving Mode Plus, refer to
page 223.
Additional information:
Speed Limit Assistant, refer to page 217.
Steering Assistant
The system is activated and helps to
keep the vehicle in the lane.
Additional information:
145
Online Edition for Part no. 01405B45E30 - VI/24
Displays
CONTROLS
Additional information:
Blue lights
Active Cruise Control with Distance Control, re-
fer to page 210.
High-beam headlights
High-beam headlights have been
switched on.
Steering Assistant
Additional information:
The system is on standby and does not
manipulate steering movements.
▷
▷
High-beam headlights, refer to page 157.
Automatic High Beam Assistant, refer to
page 158.
System activates automatically as soon
as all function conditions are fulfilled.
Additional information:
Steering Assistant, refer to page 220.
Gray lights
Seat belt reminder
Assisted Driving Mode Plus
Seat belt on the passenger seat or an-
other seat in the vehicle is not buckled.
The system is interrupted and will acti-
vate automatically as soon as all func-
tional requirements are met.
Additional information:
Seat belts, refer to page 107.
Additional information:
Assisted Driving Mode Plus, refer to page 223.
Manual Speed Limiter
White lights
The system is interrupted.
Additional information:
Cruise Control with Distance Control
Manual Speed Limiter, refer to
page 205.
No Distance Control because accelera-
tor pedal is being pressed.
Additional information:
Cruise Control
Active Cruise Control with Distance Control, re-
fer to page 210.
The system is interrupted.
Additional information:
Cruise control, refer to page 207.
Assisted Driving Mode Plus
The system can be activated.
Additional information:
Active Cruise Control with Distance
Control
Assisted Driving Mode Plus, refer to
page 223.
Indicator light is illuminated: the system
is interrupted.
Indicator light flashes: Conditions are
not adequate for the system to work. The sys-
tem was deactivated but applies the brakes
until you actively resume control by pressing
on the brake pedal or accelerator pedal.
146
Online Edition for Part no. 01405B45E30 - VI/24
Displays
CONTROLS
Display
Selection lists
Principle
Lists can be displayed and, if necessary, used
for certain functions in the instrument cluster or
the Head-up display.
▷
▷
▷
Entertainment source.
Current audio source.
List of most recent telephone calls.
Selection lists, e.g., entertainment sources, are
displayed on the instrument cluster.
If necessary, the corresponding menu will open
on the control display.
Displaying and using the list
Example: selecting a radio station
The selection lists can be displayed and op-
erated using the operating elements on the
steering wheel.
1.
Press the entertainment sources
button.
Operating
elements
Function
2.
To switch to the list of radio sta-
tions, tilt the knurled wheel to the right.
Turn the knurled wheel: dis-
play the entertainment list or
scroll up or down in the list.
3. Turn the knurled wheel to select a radio
station.
Press knurled wheel: confirm
selection.
4. Press the knurled wheel to confirm the se-
lected radio station.
Press the corresponding arrow
key to change the entertain-
ment source.
Example: changing the entertainment
source
Show list of most recent tele-
phone calls.
1.
Press the entertainment sources
button.
2.
To select an entertainment source,
turn the knurled wheel.
3. Press the knurled wheel to confirm the se-
lected entertainment source.
147
Online Edition for Part no. 01405B45E30 - VI/24
Displays
CONTROLS
The degree of the energy recovery depends on
the settings for the energy recovery.
Power gauge
Additional information:
Principle
Driving in detail: eDRIVE, refer to page 127.
The power gauge indicates the current electric
drive power as a percentage.
Reduced drive power
The available power may be reduced due to
certain factors. The power gauge is automati-
cally adjusted accordingly.
Display
In addition, the icons on the power gauge indi-
cate reduced drive power:
Icon
Description
Blue icon: cold drivetrain.
White icon: increased drive sys-
tem temperature, for instance
due to sustained or high
power demand when driving
on mountain roads.
In COMFORT and ECO PRO drive modes:
Needle in the area of arrow 1: display of the
energy recovered by coasting or when deceler-
ating.
Depending on vehicle equip-
ment and national-market ver-
sion:
Needle near arrow 2: Drive power in percent.
Drive power limitation defined
via the BMW Digital Key.
Energy recovery display
Heavily discharged high-volt-
age battery.
Icon
Meaning
Low energy recovery.
System-related functional limi-
tation.
Selector lever position D is en-
gaged.
A Check Control message is
displayed in addition where ap-
plicable.
Average energy recovery.
Selector lever position D is en-
gaged.
Sport Boost function
High energy recovery.
SPORT BOOST: Increased
Selector lever position D or B is
set.
power can be temporarily called
up in this driving mode, which
can be selected with the Driving
Experience Control, e.g., for very
fast acceleration in an overtak-
Adaptive recuperation is acti-
vated
Adaptive recuperation, refer to
page 283.
ing maneuver.
148
Online Edition for Part no. 01405B45E30 - VI/24
Displays
CONTROLS
The availability of the increased power is dis-
played on the instrument cluster.
Always make sure that the range is sufficient
for the planned trip. The range is dynamic and
can abruptly change.
Display
Meaning
The range can be reduced or increased based
on the following factors:
White
Power boost is available but
has not yet been retrieved.
▷
▷
▷
▷
▷
▷
Driving style.
Traffic conditions.
Blue
Gray
Retrieving power boost.
Drive mode change.
When called up, the Boost dis-
play is emptied accordingly.
Climate and terrain conditions.
Automatic climate control settings.
Power boost is not available,
for instance when the drive
system is cold.
After determination of a route through the
navigation system depending on the route
profile, route distance and selected speed.
▷
▷
When exiting a route or recalculating a
route.
Additional information:
Driving Experience Control, refer to page 130.
By preheating/precooling the high-voltage
battery for a DC charging process.
Standby state and drive-
ready state
Information about the current range can be
displayed in the instrument cluster.
Check Control messages indicate a limited
range.
OFF is displayed in the instru-
ment cluster. Drive-ready state
is turned off and standby state
turned on.
Additional information:
▷
Increasing the range, refer to page 281.
Display
When the drive-ready state
is switched on, READY is dis-
played in the instrument cluster.
The range is continuously dis-
played in the instrument cluster.
Additional information:
▷
Operating state of the vehicle, refer to
page 46.
Range with active guidance
The icon is displayed next to the range
when guidance was started in the navigation
system. Information from the navigation sys-
tem is taken into account for the calculation of
the current range.
Range
General information
The expected range for the energy stored in
the high-voltage battery is continuously dis-
played in the instrument cluster.
149
Online Edition for Part no. 01405B45E30 - VI/24
Displays
CONTROLS
Heavily discharged high-voltage
battery
Safety information
Warning
The high-voltage battery is
heavily discharged. The drive
power will be reduced. Heating
and climate control functions will
be deactivated.
Even at temperatures above +37 ℉/+3 ℃
there is a risk of icy roads, for instance on
bridges or shady sections of the road. There
is a risk of accident, injury, and property dam-
age. Modify your driving style to the weather
conditions at low temperatures.
In this state, the exact range can no longer be
calculated. A short range may still be available
depending on the environmental condition.
Re-establishing the drive-ready state can help
increase the range slightly, for instance to re-
move the vehicle from a hazardous area.
Charging screen
Principle
State of charge in strong
temperature fluctuations
In the case of strong temperature fluctuations
and a low state of charge of the high-voltage
battery, it may not be possible to start the ve-
hicle again at the beginning of the next trip.
Recharge vehicle with a low state of charge in
time.
The charging screen displays information
about the charging process in the instrument
cluster.
General information
Some of the displays in the instrument cluster
may differ from the illustrations in the Owner's
Manual.
When the vehicle is locked, the most important
information is displayed for a short period of
time.
Outside temperature
Display charging screen again:
General information
If the indicator drops to +37℉/+3℃ or lower, a
signal sounds.
With the charging cable plugged in,
press the button on the vehicle key.
The function is not available for the first
10 seconds after locking.
A Check Control message is displayed.
There is an increased risk of ice on roads.
When the vehicle is stationary or at low speed,
the temperature displayed may differ slightly
from the actual outside temperature due to ex-
ternal environmental influences.
Additional information:
Charge vehicle, refer to page 286.
150
Online Edition for Part no. 01405B45E30 - VI/24
Displays
CONTROLS
a compatible smartphone can also be dis-
played, e.g., map views.
Overview
Some contents for the central display range
can also be configured as a view in the Head-
up display.
Additional information:
Head-up display, refer to page 138.
Owner's Manual for Navigation, Entertain-
ment, and Communication, refer to page 6.
1
Current charging capacity 296
Configuring the central display
range
2
Charge target set 295
End of charging time 296
Set departure time 297
Departure air conditioning 297
Current range 296
The content of the central display range on the
instrument cluster can be configured individu-
ally, for instance the trip data display.
3
4
5
1.
Press the button on the steering
Current state of charge 296
wheel.
6
Range when reaching the charging desti-
nation 296
A menu bar is displayed in the instrument
cluster.
7
Charging cable status 288
2. "CONTENT"
8
9
Charging station restriction 286
Set or maximum current limit 286
Select the menu using the arrow buttons on
the steering wheel where applicable.
3. Select the desired setting using the knurled
wheel on the steering wheel.
Central display range
Displayable content
The following settings can be selected:
Trip data
Principle
▷
▷
▷
▷
▷
▷
▷
▷
Reduced display.
The trip data display provides various informa-
tion about the trip, e.g., average energy con-
sumption or trip distance.
Trip data, refer to page 151.
Assisted View, refer to page 153.
Navigation system route preview.
Navigation system map view.
G-Meter, refer to page 154.
Entertainment.
General information
The trip data can be displayed on the control
display and in the instrument cluster.
Android Auto©.
Depending on the setting in the Live Vehicle
menu, the trip data is shown on the control
display.
Depending on vehicle equipment and na-
tional-market version, select functions of
151
Online Edition for Part no. 01405B45E30 - VI/24
Displays
CONTROLS
The values can be displayed and reset de-
pending on different intervals.
▷
▷
Distance traveled depending on the config-
ured interval, arrow 3.
Total mileage, arrow 4.
Display on the control display
Current energy consumption
The current energy consumption display lets
you check your current energy consumption,
e.g., to drive efficiently.
General information
The following trip data is shown on the control
display:
▷
▷
Configured interval for displaying trip data.
Average energy consumption depend-
ing on the set interval.
Average energy consumption
The average energy consumption is deter-
mined on the basis of various distances.
▷
▷
▷
Travel time depending on the config-
ured interval.
Distance traveled depending on the
configured interval.
Adjusting the display of the trip data
The intervals for the display of the trip data
in the instrument cluster and on the control
display are adjustable.
Counter for energy recovery depend-
ing on the configured interval.
Using the button on the left steering column
switch:
Displaying trip data continuously
1.
Apps menu
1. Press the button.
2. "Vehicle"
The trip data is displayed.
3. "Live Vehicle"
4. "Content"
5. "Trip data"
Display in the instrument cluster
Information on energy consumption and dis-
tance covered can be displayed in the instru-
ment cluster.
2. Press button repeatedly until the desired
setting is displayed.
Via iDrive:
1.
Apps menu
2. "Vehicle"
3. "System settings"
4. "Time period for trip data"
5. "Values"
▷
▷
Current energy consumption, arrow 1.
Average energy consumption, arrow 2.
6. Select the desired setting:
152
Online Edition for Part no. 01405B45E30 - VI/24
Displays
CONTROLS
▷
"Since start of trip": the values are auto-
matically reset approx. four hours after
the vehicle has come to a standstill.
"Since Individual ( )"
Assisted View
▷
▷
"Since last charge": the values are auto-
matically reset after charging.
Principle
"Since factory": the values since the
time of the factory delivery are dis-
played.
With Assisted View, information on driver as-
sistance systems can be displayed on the in-
strument cluster with a vehicle animation.
▷
"Since Individual": the values since the
last manual reset are displayed. The
values can be reset at any time.
Information on parking and maneuvering is
displayed in the Assisted View whenever the
parking assistance system is active.
Resetting average values manually
The following interval can be reset manually at
any time:
Safety information
"Since Individual ( )"
Warning
Using the button on the left steering column
switch:
The system cannot serve as a substitute for
the driver’s personal judgment in assessing
the traffic situation. Based on the limits of
the system, it cannot independently react to
all traffic situations. There is a risk of acci-
dent, injury, and property damage. Adjust
driving style to traffic conditions. Watch the
surrounding traffic situation closely, be ready
to take over steering and braking at any time,
and actively intervene where appropriate.
1. Press the button.
The trip data is displayed.
General
You can configure how Assisted View is dis-
played on the central display range.
2. Press and hold the button until the values
are reset.
Additional information:
Via iDrive:
Central display area, refer to page 151
1.
Apps menu
2. "Vehicle"
3. "System settings"
4. "Time period for trip data"
5. "Reset Individual"
The average values and counters are reset.
Once the average values and counters have
been reset, the following interval is automati-
cally activated:
153
Online Edition for Part no. 01405B45E30 - VI/24
Displays
CONTROLS
Display
Manually reseting G-Meter values
1. Display the G-Meter on the instrument
cluster.
2.
Press and hold the knurled wheel
on the steering wheel until the values are
reset.
Date and time
An example of active Driver Assistance: Indica-
tor and warning lights for Distance Control and
Assisted Driving Mode are displayed. At the
same time, the Distance Control is animated in
Assisted View.
Various settings can be applied for the date
and time display such as the date format.
Depending on vehicle equipment and national-
market version, the time zone can be set or
automatic time zone enabled. With automatic
time setting, the time, date and, if necessary,
the time zone are updated automatically.
System limits
The system's detection capability is limited.
Only objects that are detected by the system
are taken into account.
1.
Apps menu
2. "Vehicle"
The system may indicate something wrong.
Additional information:
3. "System settings"
4. "Date and time"
5. Select the desired settings.
▷
▷
Cameras, refer to page 41.
Radar sensors, refer to page 42.
State of charge indicator
Safety information
Warning
G-Meter
General information
The G-Meter indicates the forces that are ap-
plied in longitudinal and transverse direction
on the vehicle occupants while driving.
Even when it is indicated that the high-volt-
age battery is discharged, the high-voltage
system is always still under high voltage.
There is a risk of fire or a risk of injury. Do
not touch or change live parts, e.g., orange
high-voltage cables, even when the batteries
are discharged.
The display can be configured on the central
display range of the instrument cluster.
The values are automatically reset whenever
you start a new drive.
Additional information:
Central display area, refer to page 151
154
Online Edition for Part no. 01405B45E30 - VI/24
Displays
CONTROLS
Display
Overview
When standby and drive-ready
state are turned on, the availa-
ble battery charge state of the
high-voltage battery is continu-
ously displayed in percent in the
instrument cluster.
Icon
Description
"Battery temperature": Tem-
perature of high-voltage bat-
tery, refer to page 286.
"FLAT TIRE MONITOR": Sta-
tus of the flat tire monitor, refer
to page 323.
In case of temperature fluctuations, the battery
charge state may change.
"Tire Pressure Monitor": status
of the Tire Pressure Monitor,
refer to page 316.
Setting the units of
measurement
"Check Control": displaying
stored Check Control mes-
sages, refer to page 139.
Depending on the national-market version, you
can set the units of measurement for some
values, for instance energy consumption, dis-
tances, and temperature.
"Service": display of the service
notifications, refer to page 156.
1.
Apps menu
2. "Vehicle"
Current driving condition
3. "System settings"
4. "Units"
General information
The current driving condition is displayed dy-
namically while driving in the Live Vehicle
menu on the control display.
5. Select the desired setting.
Vehicle status
The following states can be displayed:
▷
▷
▷
▷
Driving.
General information
The status can be displayed and actions per-
formed for several systems such as for Check
Control.
Coasting mode: "EFFICIENT COASTING".
"CHARGING BATTERY"
Adaptive recuperation.
Additional information:
Displaying vehicle status
▷
▷
Adaptive recuperation, refer to page 283.
Coasting, refer to page 284.
1.
Apps menu
2. "Vehicle"
3. "Vehicle status"
Functional requirements
▷
COMFORT or ECO PRO driving mode is se-
lected.
▷
For Live Vehicle, select the following set-
ting: "Adaptive content".
155
Online Edition for Part no. 01405B45E30 - VI/24
Displays
CONTROLS
Display
Service
Principle
The service notifications indicate recom-
mended maintenance work.
General information
After turning on, the next service appointment
or the distance remaining until the next servic-
ing is displayed briefly on the instrument clus-
ter.
An example:
The adaptive recuperation is active, arrow 1.
A service advisor can read out the mainte-
nance work from the vehicle key.
The high-voltage battery is charged when the
vehicle is decelerating, arrow 2.
Display
More information may be displayed on the
control display.
Sport displays
1.
Apps menu
Principle
2. "Vehicle"
The Sport displays especially support a sporty
driving style.
3. "Vehicle status"
4. "Service"
Functional requirements
Maintenance measures as well as legally
mandated inspections are displayed.
▷
SPORT driving mode is selected.
5. Select the desired entry.
▷
The following setting is selected for Live
Vehicle:"Adaptive content"
Entering appointment dates
Dates for mandatory vehicle inspections can
be entered.
Display
The sport displays are displayed in the Live
Vehicle menu on the control display.
Make sure that the vehicle's date and time are
set correctly.
The following information is displayed:
▷
▷
▷
▷
Torque.
1.
Apps menu
Power.
2. "Vehicle"
Speed, electric motor.
Temperature, electric motor.
3. "Vehicle status"
4. "Service"
5. "Vehicle inspection"
6. "Date:"
7. Select the desired setting.
156
Online Edition for Part no. 01405B45E30 - VI/24
