Deutsch
EnglishCharging the vehicle -> Climate control for your BMW i4 2021-2025
Charging the vehicle
MOBILITY
▷
▷
Air conditioning for departure time.
Display Meaning
The temperature of the high-volt-
Scheduling of up to three regular departure
times.
age battery is adjusted for an up-
coming charging process.
▷
Planning a one-time departure time.
Preparing the high-voltage battery,
refer to page 293
Air conditioning for departure time
1.
Apps menu
Charging station charging power
may be restricted or not available.
2. "Vehicle"
3. "Charging"
4. "Departure plan"
5. "Pre-conditioning for departure"
Setting the departure time
1.
Apps menu
2. "Vehicle"
3. "Charging"
4. "Departure plan"
5. Select the desired departure time.
6. Set the time and weekday.
The shaded area indicates a limitation in the
charging capacity that can occur, for instance
due to the connected charging infrastructure.
Activating the departure time
Additional information:
1.
Apps menu
▷
▷
Charge state indicator, refer to page 154
Charging screen, refer to page 150.
2. "Vehicle"
3. "Charging"
4. "Departure plan"
5. Activate the desired departure time.
Departure time
The set departure time will be deactivated if
the departure time was ignored three times in
a row.
Principle
For optimum range and air conditioning, the
departure time can be set before parking the
vehicle.
Climate control
General information
With a set departure time, the vehicle is pre-
heated or precooled if air conditioning is set.
The following settings for vehicle air condition-
ing are possible:
▷
Activate pre-conditioning immediately.
The following settings are possible for depar-
ture time:
297
Online Edition for Part no. 01405B45E30 - VI/24
Charging the vehicle
MOBILITY
The range will be reduced if pre-condition-
ing is activated without a charging cable
connected.
Activate/deactivate the function
1.
Apps menu
2. "Vehicle"
▷
Planned air conditioning at the set depar-
ture time.
3. "Charging"
4. "Location-based charging settings"
5. "Save based on location"
Additional information:
Pre-conditioning, refer to page 258.
If the function is deactivated, no location-
based settings are saved and saved settings
are not enabled.
Location-based charging
settings
Depending on vehicle equipment, the system
can also be operated with the My BMW App on
a smartphone.
Principle
Various settings can be selected for charging
at charging stations.
Display on the control display
If the function is enabled, the icon
indicates the location-based settings,
which are automatically saved and en-
abled.
To simplify recharging at known charging loca-
tions, some changed settings such as charging
mode can be saved based on location.
General information
Saving active charging settings for
other charging locations
The charging settings currently set in the menu
can be saved as default settings for other
charging locations.
When the function is activated, some settings
are automatically saved as soon as the charg-
ing process is finished and the charging cable
is disconnected.
The settings are saved based on the GPS co-
ordinates of the charging location.
1.
Apps menu
Saved settings are enabled as soon as the
vehicle approaches a known charging location
again.
2. "Vehicle"
3. "Charging"
4. "Location-based charging settings"
5. "Apply current settings for new locations"
Before charging, ensure that the settings en-
abled match the desired charging station,
e.g., charging mode.
Deleting location-based charging
settings
When the vehicle leaves a known charging lo-
cation, the settings are automatically set to
factory settings.
1.
Apps menu
2. "Vehicle"
Functional requirement
To use the function, a GPS signal must be re-
ceived.
3. "Charging"
4. "Location-based charging settings"
5. "Delete all location-based charging
settings"
298
Online Edition for Part no. 01405B45E30 - VI/24
