Deutsch
EnglishMOBILITY -> Maintenance for your BMW i3 2013-2022
Maintenance
MOBILITY
Maintenance
Vehicle features and options
Condition Based Service CBS
This chapter describes all standard, country-spe‐
cific and optional features offered with the series.
It also describes features and functions that are
not necessarily available in your vehicle, e.g., due
to the selected options or country versions. This
also applies to safety-related functions and sys‐
tems. When using these functions and systems,
the applicable laws and regulations must be ob‐
served.
Concept
Sensors and special algorithms take into account
the driving conditions of the vehicle. CBS uses
these to provide maintenance recommendations.
The system makes it possible to adapt the
amount of maintenance corresponding to your
user profile.
General information
Information on service notifications, refer to
page 119, can be displayed on the Control Dis‐
play.
BMW maintenance system
The maintenance system provides service notifi‐
cations and thereby provides support in main‐
taining road safety and the operational reliability
of the vehicle.
Service data in the vehicle key
Information on the service notifications is contin‐
uously stored in the vehicle key. The service
center can read this data out and suggest a
maintenance scope for the vehicle.
In some cases, scopes and intervals of the main‐
tenance system may vary according to the coun‐
try version. Replacement work, spare parts, fuels
and lubricants, and wear materials are calculated
separately. Further information is available from a
dealer's service center or another qualified serv‐
ice center or repair shop.
Therefore, hand the service advisor the vehicle
key with which the vehicle was driven most re‐
cently.
Storage periods
Storage periods during which the vehicle battery
was disconnected are not taken into account.
Safety information
If this occurs, have a dealer's service center or
another qualified service center or repair shop
update the time-dependent maintenance proce‐
dures, such as checking brake fluid and, if neces‐
sary, changing the engine oil and the microfilter/
activated-charcoal filter.
DANGER
Improperly performed work, in particular main‐
tenance and repair on the high-voltage system,
can lead to electric shock. There is a risk of in‐
jury, fire and danger to life.
Have work on the vehicle, in particular mainte‐
nance and repair, performed by an authorized
BMW i dealer’s service center or another quali‐
fied service center or repair shop.
246
Maintenance
MOBILITY
the foregoing, the manufacture of your vehicle
strongly recommends that access to the socket
for Onboard Diagnosis be limited to a dealer's
service center or another qualified service cen‐
ter or repair shop or other persons that have
the specialized training and equipment for pur‐
poses of properly utilizing the socket for On‐
board Diagnosis.
Maintenance Manual and
Service and Warranty
Information Booklet for US
models and Warranty and
Service Guide Booklet for
Canadian models
Please consult your Maintenance Manual and
Service and Warranty Information Booklet for US
models and Warranty and Service Guide Booklet
for Canadian models for additional information on
the performance of service and maintenance
work.
Position
The manufacturer of your vehicle recommends
that maintenance and repair be performed by a
service center or another qualified service center
or repair shop. Records of regular maintenance
and repair work should be retained.
Located on the driver's side is an OBD socket for
reading the vehicle data.
Socket for OBD Onboard
Diagnosis
On vehicles with Range Extender, additional
components are checked that are critical for its
emissions mix.
General information
Emissions
Applies to vehicles with Range Extender.
Devices connected to the OBD socket trigger
the alarm system when the vehicle is locked. Re‐
move any devices connected at the OBD socket
before locking the vehicle.
▷ The warning light lights up:
Emissions are deteriorating. Have the
vehicle checked as soon as possible.
Safety information
▷ The warning light flashes under certain cir‐
cumstances:
NOTICE
This indicates that there is excessive misfiring
in the engine.
The socket for Onboard Diagnosis is an intri‐
cate component intended to be used in con‐
junction with specialized equipment to check
the vehicle’s primary emissions system. Im‐
proper use of the socket for Onboard Diagno‐
sis, or contact with the socket for Onboard Di‐
agnosis for other than its intended purpose,
can cause vehicle malfunctions and creates
risks of personal and property damage. Given
Reduce the vehicle speed and have the sys‐
tem checked immediately; otherwise, serious
engine misfiring within a brief period can seri‐
ously damage emission control components,
in particular the catalytic converter.
247
