Deutsch
EnglishREFERENCE -> Appendix for your BMW 8 Series 2018-2025
Appendix
REFERENCE
Appendix
License Texts and Certifications
General information
USA/Canada
Any updates to the Owner's Manual of the ve-
hicle are listed here.
HeadUnit
Harman
Updates made after the
editorial deadline
Model: MGU
FCC ID: T8GMGU
IC: 6434A-MGU
The following chapters were updated in the
printed version of the Owner's Manual after
the editorial deadline for the Integrated Own-
er's Manual in the vehicle had closed:
Model: MGU F
FCC ID: T8GMGUF
IC: 6434A-MGUF
Model: MGU FQ
FCC ID: T8GMGUFQ
IC: 6434A-MGUFQ
Model: MGU FA
▷
Operation: Indicator and warning lights:
Red lights: Forward Collision Warning with
braking function.
▷
▷
Operation: Indicator and warning lights:
Red lights: Intersection Collision Warning.
FCC ID: T8GMGUFA
IC: 6434A-MGUFA
Model: MGU BASE
FCC ID: T8GMGUBASE
IC: 6434A-MGUBASE
Model: MGU RSE
FCC ID: T8GMGURSE
IC: 6434A-MGURSE
Alps Alpine
Operation: Indicator and warning lights:
Red lights: Daytime Pedestrian Collision
Mitigation.
▷
Operation: safety: Forward Collision Warn-
ing with braking function.
▷
▷
Operation: Safety: Evasion Assistant.
Operation: Safety: Intersection Collision
Warning with city braking function.
▷
Operation: safety: Daytime Pedestrian Col-
lision Mitigation.
MGU_F APN
▷
▷
Operation: Safety: PostCrash iBrake.
Model: MGU_F APN
FCC ID: A269ZUA160
IC: 700B-UA160
Harman, Alps Alpine
Modification statement:
Driving tips: Take into account while driv-
ing: General driving notes: Closing the trunk
lid/tailgate: Safety instructions: Driving with
the trunk lid/tailgate/rear window closed.
▷
▷
Mobility: Wheels and tires: Tire repair set.
Mobility: Wheels and tires: Lug bolt lock.
The party responsible for the compliance has
not approved any changes or modifications to
this device by the user. Any changes or modifi-
372
Online Edition for Part no. 01405B381F1 - II/24
Appendix
REFERENCE
cations could void the user’s authority to oper-
ate the equipment.
erates, uses and can radiate radio frequency
energy and, if not installed and used in accord-
ance with the instructions, may cause harm-
ful interference to radio communications. How-
ever, there is no guarantee that interference
will not occur in a particular installation.
Le responsable de l’homologation de ce pro-
duit n’approuve aucune modification apportée
à l’appareil par l’utilisateur, quelle qu’en soit la
nature. Tout changement ou modification peu-
vent annuler le droit d’utilisation de l’appareil
par l’utilisateur.
If this equipment does cause harmful interfer-
ence to radio or television reception, which can
be determined by turning the equipment off
and on, the user is encouraged to try to correct
the interference by one or more of the follow-
ing measures:
Wireless notice:
This device complies with FCC/ISED radiation
exposure limits set forth for an uncontrolled
environment and meets the FCC radio fre-
quency (RF) Exposure Guidelines and RSS-102
of the ISED radio frequency (RF) Exposure
rules. This transmitter must not be co-located
or operating in conjunction with any other an-
tenna or transmitter.
▷
▷
Reorient or relocate the receiving antenna.
Increase the separation between the equip-
ment and receiver.
▷
▷
Connect the equipment into an outlet on
a circuit different from that to which the re-
ceiver is connected.
This device must be installed and used at a
distance >20 cm from the body.
Consult the dealer or an experienced
radio/TV technician for help.
Le présent appareil est conforme à l'exposition
aux radiations FCC / ISED définies pour un en-
vironnement non contrôlé et répond aux direc-
tives d'exposition de la fréquence de la FCC ra-
diofréquence (RF) et RSS-102 de la fréquence
radio (RF) ISED règles d'exposition. L'émetteur
ne doit pas être colocalisé ni fonctionner con-
jointement avec à autre antenne ou autre ém-
etteur.
Garmin
Model: MGU-F-GAR
FCC ID: IPH-04105
IC: 1792A-04105
Model: MGU-FQ-GAR
FCC ID: IPH-A4105
IC: 1792A-A4105
Model: MGU-FA-GAR
FCC ID: IPH-B4105
IC: 1792A-B4105
Ce produit doit être installé de façon à garantir
une distance minimale de séparation de 20 cm
ou plus de tout corps humain
CAN ICES-3 (B) / NMB-3 (B)
This Class B digital apparatus complies with
Canadian ICES-003.
Changes or modifications not expressly ap-
proved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
Cet appareil numérique de classe B est con-
forme à la norme canadienne ICES-003.
This device complies with part 15 of the FCC
Rules and contains licence-exempt transmit-
ter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada's
licence-exempt RSS(s). Operation is subject to
the following two conditions:
FCC Class B digital device notice
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasona-
ble protection against harmful interference in
a residential installation. This equipment gen-
373
Online Edition for Part no. 01405B381F1 - II/24
Appendix
REFERENCE
1. This device may not cause harmful interfer-
ence.
FCC Class B device notice Note: This equip-
ment has been tested and found to comply
with the limits for a Class B digital device, pur-
suant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential in-
stallation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the in-
structions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or televi-
sion reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
2. This device must accept any interference re-
ceived, including interference that may cause
undesired operation.
This radio transmitter has been approved by
the FCC/ISED to operate with the antenna
types listed below with the maximum permissi-
ble gain indicated. Antenna types not included
in this list, having a gain greater than the max-
imum gain indicated for that type, are strictly
prohibited for use with this device.
Interface and frequency range: Bluetooth &
Wifi @ 2.4GHz
Type: ¼ wave coax
Max Gain: -2.5 dBi
Interface and frequency range: Wifi @ 5GHz
Type: ¼ wave coax
–Reorient or relocate the receiving antenna.
–Increase the separation between the equip-
ment and receiver.
Max Gain: -2.8 dBi
This device complies with the FCC/ ISED RF
exposure limits and has been evaluated in
compliance with portable exposure condition.
–Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
The exposure standard for wireless mobile
phones/portable devices employs a unit of
measurement known as the Specific Absorp-
tion Rate, or SAR.
–Consult the dealer or an experienced
radio/TV technician for help.
L’émetteur/récepteur exempt de licence con-
tenu dans le présent appareil est conforme aux
CNR d’Innovation, Sciences et Développement
économique Canada applicables aux appareils
radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes:
This device has been shown to be capable of
compliance for localized SAR for uncontrolled
environment/general population exposure lim-
its specified in ANSI/IEEE Std. C95.1-1992 and
has been tested in accordance with the meas-
urement procedures specified in ISED RSS-102
and IEEE Std. 1528- 2013.
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radi-
oélectrique subi, même si le brouillage est sus-
ceptible d’en compromettre le fonctionnement.
The standards include a substantial safety
margin designed to assure the safety of all
persons, regardless of age and health. The
standard incorporates a substantial margin of
safety to give additional protection for the pub-
lic and to account for any variations.
To comply with the measured SAR value/SAR
testing exclusion, the equipment must be in-
stalled and operated with a minimum distance
of 51 mm of the human body.
374
Online Edition for Part no. 01405B381F1 - II/24
Appendix
REFERENCE
Vietnam
Front Radar Sensor
375
Online Edition for Part no. 01405B381F1 - II/24
