CONTROLS -> Transporting children safely for your BMW 8 Series 2018-2025
Transporting children safely
CONTROLS
Transporting children safely
Vehicle features and options
Warning
A hot vehicle may result in death to persons,
especially children, or animals. There is a
risk of injury or danger to life. Do not leave
people, especially children, or animals unat-
tended in the vehicle.
This chapter describes all standard, country-
specific, and optional equipment offered with
the series. It also describes features and func-
tions that are not necessarily available in the
vehicle, e.g., due to the selected options or
country versions. This also applies to safety
functions and systems. When using these
functions and systems, the applicable laws
and regulations must be observed.
Warning
Exposure to intense sunlight can cause child
restraint systems and their components to
become very hot. Persons may sustain burn
injuries when touching the hot components.
There is a risk of injury. Do not expose
the child restraint system to direct sunlight
or cover where necessary. If necessary, let
the child restraint system cool down before
transporting a child. Do not leave children un-
attended in the vehicle.
The right place for children
Safety information
Warning
Unattended children or animals in the vehicle
can cause the vehicle to move and endanger
themselves and traffic, for example, due to
the following actions:
Children in the rear seat
▷
▷
▷
Establishing standby.
General information
Accident research shows that the safest place
for children is in the rear seat.
Releasing the parking brake.
Opening and closing the doors or win-
dows.
Children younger than 13 years of age or
shorter than 5 ft/150 cm should be transported
in the rear seat in suitable child restraint sys-
tems designed for the age, weight and size
of the child. Children 13 years of age or older
must wear a seat belt as soon as a suitable
child restraint system can no longer be used
due to their age, weight, or size.
▷
▷
Engaging selector lever position N.
Using vehicle equipment.
There is a risk of accident, injury, or property
damage. Do not leave children or animals un-
attended in the vehicle. Take the vehicle key
with you when exiting and lock the vehicle.
126
Online Edition for Part no. 01405B381F1 - II/24
Transporting children safely
CONTROLS
Safety information
Installing child restraint
systems
Warning
The seat belt cannot be fastened correctly
on children shorter than 5 ft/150 cm without
suitable additional child restraint systems.
The protective effect of safety gear, including
seat belts, can be limited or lost when seat
belts are fastened incorrectly. An incorrectly
fastened seat belt can cause additional inju-
ries, for instance in the event of an accident,
braking or evasive maneuvers. There is a risk
of injury or danger to life. Secure children
shorter than 5 ft/150 cm using suitable child
restraint systems.
General information
Pay attention to the specifications and the op-
erating and safety information of the child re-
straint system manufacturer when selecting,
installing, and using child restraint systems.
Safety information
Warning
The protective effect of child restraint sys-
tems and their fastening systems which have
been damaged or exposed to an accident
can be limited or lost. A child cannot be prop-
erly restrained in the event of an accident,
braking or evasive maneuvers. There is a risk
of injury or danger to life.
Children on the front passenger
seat
General information
Do not use child restraint systems which
have been damaged or exposed to an acci-
dent.
Before using a child restraint system on the
front passenger seat, ensure that the front,
knee, and side airbags on the passenger's side
are deactivated.
If attachment systems have been damaged
or strained by an accident, have them
checked and replaced by an authorized serv-
ice center or another qualified service center
or repair shop.
Additional information:
For automatic deactivation of front passenger
airbags, refer to page 182.
Safety information
Warning
Warning
The stability of the child restraint system is
limited or compromised with incorrect seat
setting or improper installation of the child
seat. There is a risk of injury or danger to life.
Make sure that the child restraint system fits
securely against the backrest. If possible, ad-
just the backrest tilt for all affected backrests
and correctly adjust the seats. Make sure that
seats and backrests are securely engaged or
locked. If possible and necessary, adjust the
height of the head restraints or remove them.
Active front passenger airbags can injure a
child in a child restraint system when the air-
bags are deployed. There is a risk of injury.
Make sure that the front passenger airbags
are deactivated and that the PASSENGER
AIRBAG OFF indicator light illuminates.
127
Online Edition for Part no. 01405B381F1 - II/24
Transporting children safely
CONTROLS
On the front passenger seat
Child seat security
Deactivating the airbags
Warning
Active front passenger airbags can injure a
child in a child restraint system when the air-
bags are deployed. There is a risk of injury.
Make sure that the front passenger airbags
are deactivated and that the PASSENGER
AIRBAG OFF indicator light illuminates.
The seat belts in the rear and the front pass-
enger seat belt can be permanently locked to
fasten child restraint systems.
Before installing a child restraint system in the
front passenger seat, make sure that the front,
knee and side airbags on the passenger's side
are deactivated.
Locking the seat belt
1. Pull out the seat belt strap completely.
Additional information:
2. Secure the child restraint system with the
seat belt.
For automatic deactivation of front passenger
airbags, refer to page 182.
3. Allow the seat belt strap to be pulled in
and pull it tight against the child restraint
system. The seat belt is disabled.
Seat position and height
After installing a child restraint system, move
the front passenger seat as far back as it will
go and, if possible, bring it up to the highest
position. This seat position and height ensure
the best possible position for the belt and of-
fers optimal protection in the event of an acci-
dent.
Unlocking the seat belt
1. Unbuckle the seat belt buckle.
2. Remove the child restraint system.
3. Allow the seat belt strap to be pulled in
completely.
If the upper attachment point of the seat belt
is located in front of the seat belt guide of the
child seat, move the front passenger seat care-
fully forward until the best possible seat belt
guide position is reached.
LATCH child restraint
system
General information
LATCH: Lower Anchors and Tether for Chil-
dren.
Backrest width
Adjustable backrest width: before installing a
child restraint system in the front passenger
seat, open the backrest width completely. Do
not change the backrest width again and do
not call up a memory position.
Pay attention to the specifications, operating
tips and safety instructions from the child re-
straint system manufacturer when selecting,
installing, and using LATCH child restraint sys-
tems.
128
Online Edition for Part no. 01405B381F1 - II/24
Transporting children safely
CONTROLS
Position
Mounts for the lower LATCH
anchors
Icon
Meaning
General information
The corresponding icon shows
the mounts for the lower
LATCH anchors.
The lower anchors may be used to attach the
CRS to the vehicle seat up to a combined child
and CRS weight of 65 lbs/30 kg when the child
is restrained by the internal harnesses.
Seats equipped with lower an-
chors are marked with a pair
(2) of LATCH icons.
Safety information
For vehicles equipped with a
middle seat:
Warning
It is not recommended to use
the inner lower anchors of
standard outer LATCH posi-
tions to fasten a child restraint
system on the middle seat.
Use the vehicle seat belt in-
stead for the middle seat.
If the lower anchors on child restraint system
are not engaged correctly, the child restraint
system will not be able to provide suitable
protection. There is a risk of injury or danger
to life. Make sure that the lower anchors are
correctly engaged and that the child restraint
system fits securely against the backrest.
Before installing the LATCH child
restraint systems
Pull the seat belt away from the area of the
child seat mountings.
Warning
The mounts for the lower anchors and at-
tachment points of the child restraint system
are intended for attaching child restraint sys-
tems only. If other objects are attached, the
mounts or attachment points can be dam-
aged. There is a risk of injury or risk of dam-
age to property. Only attach child restraint
systems at the corresponding mounts for the
lower anchors or attachment points.
Installation of the LATCH child
restraint systems
1. Mount child restraint system, see manufac-
turer's information.
2. Ensure that both LATCH anchors are prop-
erly engaged.
Child restraint systems with
tether strap
General information
When attaching child restraint systems to the
upper attachment points, observe the specifi-
cations and the operating and safety informa-
tion of the child restraint system manufacturer.
129
Online Edition for Part no. 01405B381F1 - II/24
Transporting children safely
CONTROLS
Safety information
Attachment points
Icon
Meaning
Warning
The respective icon shows the
attachment point for the upper
retaining strap. Seats with an
upper top tether are marked
with this icon. It is located on
the rear seat backrest, the rear
shelf or the rear seat.
If the upper retaining strap is incorrectly used
for the child restraint system, the protective
effect is reduced. There is a risk of injury. En-
sure that the upper retaining strap is guided
to the upper attachment point without twist-
ing and not over sharp edges.
Routing the retaining strap
Warning
If the rear seat backrest is not locked, the
protective effect of the child restraint system
is limited or nonexistant. In certain situations,
for instance braking maneuvers or in case of
an accident, the rear seat backrest can fold
forward. There is a risk of injury or danger to
life. Make sure that the rear seat backrests
are locked.
1
Driving direction
Warning
2
3
4
5
6
Head restraint
The mounts for the lower anchors and at-
tachment points of the child restraint system
are intended for attaching child restraint sys-
tems only. If other objects are attached, the
mounts or attachment points can be dam-
aged. There is a risk of injury or risk of dam-
age to property. Only attach child restraint
systems at the corresponding mounts for the
lower anchors or attachment points.
Hook for upper retaining strap
Attachment point/eye
Seat backrest
Upper retaining strap
Attaching the upper retaining strap
to the attachment point
1. Release the backrest, and tilt it forward.
2. Guide the upper retaining strap over the
head restraint to the anchor.
3. Attach the hook of the retaining strap to the
attachment point.
4. Fold back the backrest of the rear seat.
Make sure that the retaining strap cannot
be jammed when folding back and locking
the rear seat backrest.
130
Online Edition for Part no. 01405B381F1 - II/24
Transporting children safely
CONTROLS
5. Tighten the retaining strap.
6. Push the seat backrest rearward and lock it
131
Online Edition for Part no. 01405B381F1 - II/24





