Controls and features -> Automatic climate control for your BMW 7 Series 2001-2007

104nAutomatic climate control  
Online Edition for Part No. 01 41 0 004 597 - © 08/99 BMW Group  
Automatic climate control  
105n  
1 Air flow directed against windshield 11 Automatic air distribution –  
and door windows  
right-hand side 106  
2 Air flow toward the upper body  
The rotary dials allow infinitely-vari-  
able regulation of the air supply,  
changes in the air-flow direction,  
and temperature regulation.  
12 Air supply – right-hand side 107  
13 Automatic recirculated-air control  
(AUC) 107  
14 Air conditioner 106  
15 Rear window defroster 74, 107  
(Change air-flow direction in the  
rear passenger area with the levers  
in the center of the vent.) In the  
closed position, air flows out at the  
upper center of the instrument  
panel only 108  
16 Defrosting the windows and remove  
condensation 106  
17 Air grill for interior temperature  
sensor – please keep clear and  
unobstructed  
3 Front footwell ventilation  
There are corresponding air vents in  
the rear footwell as well  
18 Air supply – left-hand side 107  
4 Automatic air distribution –  
left-hand side 106  
5 Individual air distribution –  
left-hand side 106  
6 Temperature control –  
left-hand side 107  
7 Temperature and air flow display,  
left- and right-hand sides 107, 108  
8 Temperature control –  
right-hand side 107  
9 Maximum cooling 107  
Residual heat mode 108  
10 Individual air distribution –  
right-hand side 106  
Online Edition for Part No. 01 41 0 004 597 - © 08/99 BMW Group  
106nAutomatic climate control  
Tips for pleasant driving  
Automatic air distribution  
To defrost windshield and door  
windows  
Use the automatic system, i.e., press  
AUTO button 4. Select an interior tem-  
perature that is comfortable for you –  
The AUTO program as-  
sumes the adjustment of  
the air distribution and the air supply for  
This program quickly removes  
ice and condensation from the  
we recommend 727 (226) as a com- you and in addition adapts the temper- windshield and the side windows.  
fortable setting. When the outside tem- ature to external influences (summer,  
perature is above 417 (56), you can  
winter) to meet preferences you can  
Air conditioner  
also use the air conditioning system 14. specify. This program maintains a com-  
This will dry the air and prevent window fortable in-car climate regardless of the  
fogging, for example if people are wear- season. Select an interior temperature  
ing damp clothes in the vehicle. Set the that is comfortable for you – we recom-  
The air is cooled and dehumidi-  
fied and – depending on the tem-  
perature setting – warmed again when  
the air conditioner system is switched  
on.  
outlets 2 so that the air flows past you  
and does not flow directly at you. Set  
the rotary dial between the air outlets 2 The temperature setting and the word  
mend 727 (226) as a comfortable  
setting.  
Depending on the weather, the wind-  
shield may fog over briefly when the en-  
gine is started.  
for the upper body to a medium posi-  
tion, since air that is somewhat cooler  
promotes driving without fatigue.  
"AUTO" for the air flow appear in the  
display 7 (refer to the overview on  
page 104). Open the ventilation outlet  
for the upper body area. Switch on the  
air conditioner in warm weather. The  
maximum cooling capacity is achieved  
when you set the rotary dial 3 (refer to  
page 108) to cold.  
At outside temperatures below approx.  
417 (56), switch off the air condi-  
tioner. This will help to prevent the win-  
dows from fogging up.  
The following description will guide you  
through additional individual settings.  
If the windows fog over immediately af-  
ter the air conditioner is switched off,  
switch it back on.  
Your BMW center can adjust the  
settings of your vehicle in such a  
manner that, when you unlock the vehi-  
cle via remote control with your person-  
alized key, your own setting for the au-  
tomatic climate control is initiated.<  
Individual air distribution  
Condensation forms in the air  
conditioner system during opera-  
tion, which then exits under the vehicle.  
You can cancel the AUTO  
program by selecting spe-  
cific distribution patterns to Traces of condensed water of this kind  
suit your own individual re-  
quirements. You can direct  
are thus normal.<  
air to flow onto the windows , toward  
the upper body , and into the footwell  
.
Online Edition for Part No. 01 41 0 004 597 - © 08/99 BMW Group  
Automatic climate control  
107n  
perature is achieved as quickly as pos-  
permanently blocked. The system  
then recirculates the air currently  
within the vehicle.  
Maximum cooling  
sible. It then maintains this tempera-  
ture, regardless of the season.  
You will get maximum  
cooling capacity using this  
program if the engine is running and  
the outside temperature is above  
+41 7 (+5 6).  
If you have a multi-function steering  
wheel with the AUC button (refer to  
page 23), you can also switch between  
"OFF" and AUC from there.  
You can set uncontrolled heater  
output at up to 90 7 (326). Full  
cooling output is available from the air  
conditioner down to 60 7 (166).<  
If the temperature display 9 jumps to  
+61 7 (+16 6), the system switches  
over to the recirculated-air mode, and  
the air will only stream out of the venti-  
lation grill with the maximum amount of  
air flow. That is why you need to keep  
these open if you select this program.  
If the windows fog over in the re-  
circulated-air mode, switch this  
mode off and increase the air supply as  
required.<  
Air supply  
The air flow is controlled  
automatically in the "AUTO"  
program. AUTO will appear in the dis-  
play 7. Refer to the overview on  
page 104. Use "+" and "" to vary the  
air flow. When your setting is displayed  
by bars, the automatic air flow is  
switched off. Automatic air distribution  
maintains its setting. You can reactivate  
the automatic air flow by pressing the  
"AUTO" button.  
Automatic recirculated-air control  
(AUC)  
Rear window defroster  
When the rear window defroster  
is activated, the indicator lamp  
comes on. The rear window defroster  
switches off automatically.  
You can respond to unpleasant  
external odors by temporarily  
stopping the flow of outside air. The  
system then recirculates the air cur-  
rently within the vehicle. Press the but-  
ton repeatedly to run through the fol-  
lowing control sequence:  
Temperature  
You can make individual  
temperature settings on the  
When you press "–" during operation at  
minimum blower speed, all displays are  
canceled: The fan, heating and air con-  
ditioner are switched off. The outside  
air supply is closed. You can reactivate  
the system by pressing any button of  
the automatic climate control.  
> Indicator lamps off: Fresh air flows  
into the vehicle  
driver's side and the front passenger  
side. Your settings will be shown in the  
display 7. The displayed temperatures  
are reference values for the interior  
temperature. We recommend 727  
(226) as a comfortable setting,  
> Left-hand indicator lamp on – AUC  
mode: The system detects pollutants  
in the outside air and responds by  
deactivating the outside air flow  
when required. The system then re-  
circulates the air currently within the  
vehicle  
whether the air conditioner is operating  
or not. When you start the vehicle, the  
system ensures that the selected tem-  
> Right-hand indicator lamp on: The  
flow of external air into the vehicle is  
Online Edition for Part No. 01 41 0 004 597 - © 08/99 BMW Group  
108nAutomatic climate control  
Rotary dial 3 allows you to temper the  
air flow from these outlets by adding  
heat or cooling as desired:  
Residual heat mode  
The heat which is stored in  
the engine is utilized for  
heating the interior when the engine  
has been switched off (while waiting at  
a railroad crossing, for instance).  
> Turn toward blue – colder  
> Turn toward red – warmer  
To adjust the rear compartment vents:  
Use the rotary dial on the left to close or  
open the vent for any desired air flow.  
You can adjust the temperature with the  
right rotary dial in the same manner as  
the adjustment for the front ventilation  
outlets.  
In ignition key position 1, you can alter  
the settings of the automatic climate  
control. In ignition key position 0, the  
system automatically directs heated air  
to the windshield, side windows and  
footwells.  
Draft-free ventilation  
Use the levers at the centers of the vent  
outlets to control the direction of the  
emerging air.  
You can adjust the vent outlets for the  
upper body area for individual selection  
of air-flow rates and directions:  
This function may be activated  
when the outside temperature is  
below approx. 59 7 (156), the engine  
is at operating temperature, and the  
battery is adequately charged. The LED  
in the button lights up when all the op-  
tions are fulfilled.<  
You can open and close the ventilation  
outlets with infinitely-variable adjust-  
ments and direct them up or down with  
the rotary dials 1. In the closed position,  
air exits only at the upper center of the  
instrument panel. You can use the le-  
vers (2) to adjust the flow direction from  
side to side.  
Set the outlets so that the air flows past  
you and is not directed straight at you.  
Online Edition for Part No. 01 41 0 004 597 - © 08/99 BMW Group  
Automatic climate control Rear passenger-area air conditioning*  
109n  
Microfilter, activated-charcoal  
filter  
2 Temperature  
The rear passengers can adjust the  
The microfilter removes dust and pollen  
from the incoming air. The activated-  
charcoal filter provides additional pro-  
tection by filtering gaseous pollutants  
from the outside air. Your BMW center  
replaces the filter assemblies as a stan-  
dard part of your scheduled mainte-  
nance. A substantial reduction in air  
flow indicates that the filter needs to be  
replaced early.  
temperature for the ventilation outlets  
which are positioned above the con-  
trols as desired. The figures in the dis-  
play provide a general indication of in-  
terior temperature. We recommend  
727 (226) as a comfortable setting,  
whether the air conditioner is operating  
or not. When you start the vehicle, the  
system ensures that the selected tem-  
perature is achieved as quickly as pos-  
sible. It then maintains this tempera-  
ture, regardless of the season.  
1 Display for temperature and air  
supply  
2 Temperature/  
Switching the system on  
3 Air supply  
When you press "" in the lowest  
3 Air supply/  
Switching the system on  
blower speed, all of the displays are  
canceled: This setting deactivates the  
blower and shuts off the air supply. You  
can then switch the rear air conditioner  
back on by pressing the button again.  
The air flow in the rear will vary accord-  
ing to the settings selected at the front.  
Online Edition for Part No. 01 41 0 004 597 - © 08/99 BMW Group