Saving fuel -> Use coasting for your BMW 6 Series 2011-2017
Driving tips
Saving fuel
accelerating, shift up before reaching high en‐
gine speeds.
Switch off any functions that
are not currently needed
Functions such as seat heating and the rear
window defroster require a lot of energy and
reduce the range, especially in city and stop-
and-go traffic.
When you reach the desired speed, shift into
the highest applicable gear and drive with the
engine speed as low as possible and at a con‐
stant speed.
If necessary, observe the gear shift indicator of
the vehicle, refer to page 94.
Reel off these functions if they are not needed.
The ECO PRO driving program supports the
energy conserving use of comfort features.
These functions are automatically deactivated
partially or completely.
Use coasting
When approaching a red light, take your foot
off the accelerator and let the vehicle coast to
a halt.
Have maintenance carried
out
For going downhill take your foot off the accel‐
erator and let the vehicle roll.
Have vehicles maintained regularly to achieve
optimal vehicle efficiency and operating life.
The maintenance should be carried out by
your service center.
The flow of fuel is interrupted while coasting.
Switch off the engine during
longer stops
Also note the BMW Maintenance System, refer
to page 220.
Switch off the engine during longer stops, e.g.,
at traffic lights, railroad crossings or in traffic
congestion.
ECO PRO
Auto Start/Stop function
The concept
The Auto Start/Stop function of your vehicle
automatically switches off the engine during a
stop.
ECO PRO supports a driving style that saves
on fuel consumption. For this purpose, the en‐
gine control and comfort features, e. g. the cli‐
mate control output, are adjusted.
If the engine is switched off and then restarted
rather than leaving the engine running con‐
stantly, fuel consumption and emissions are
reduced. Savings can begin within a few sec‐
onds of switching off the engine.
Under certain conditions the engine is auto‐
matically decoupled from the transmission in
the D selector lever position. The vehicle con‐
tinues traveling with the engine idling to re‐
duce fuel consumption. Selector lever position
D remains engaged.
In addition, fuel consumption is also deter‐
mined by other factors, such as driving style,
road conditions, maintenance or environmental
factors.
In addition, context-sensitive instructions are
displayed to assist with an optimized fuel con‐
sumption driving style.
The achieved extended range is displayed in
the instrument cluster as bonus range.
186





