MOBILITY -> Engine oil for your BMW 4 Series 2013-2020

Engine oil  
MOBILITY  
Engine oil  
Vehicle features and  
options  
NOTE  
Too much engine oil can damage the engine or  
the catalytic converter. There is a risk of dam‐  
age to property. Do not add too much engine  
oil. When too much engine oil is added, have  
the engine oil level corrected by a dealer’s serv‐  
ice center or another qualified service center or  
repair shop.  
This chapter describes all standard, country-spe‐  
cific and optional features offered with the series.  
It also describes features that are not necessarily  
available in your vehicle, e. g., due to the selected  
options or country versions. This also applies to  
safety-related functions and systems. When us‐  
ing these functions and systems, the applicable  
laws and regulations must be observed.  
Electronic oil measurement  
General information  
General information  
The electronic oil measurement has two measur‐  
ing principles:  
The engine oil consumption is dependent on  
your driving style and driving conditions.  
Monitoring.  
Therefore, regularly check the engine oil level af‐  
ter refueling by taking a detailed measurement.  
Detailed measurement.  
The engine oil consumption can increase in the  
following situations, for example:  
When making frequent short-distance trips or  
using a dynamic driving style, for instance when  
taking curves aggressively, regularly perform a  
detailed measurement.  
Sporty driving style.  
Break-in of the engine.  
Idling of the engine.  
Monitoring  
Concept  
The engine oil level is monitored electronically  
while driving and can be shown on the Control  
Display.  
With use of engine oil types that are classified  
as not suitable.  
Different Check Control messages appear on the  
Control Display depending on the engine oil  
level.  
If the engine oil level is outside its permissible  
operating range, a Check Control message is  
displayed.  
Safety information  
A red indicator light indicates that the en‐  
gine oil pressure is too low.  
NOTE  
An engine oil level that is too low causes en‐  
gine damage. There is a risk of damage to  
property. Immediately add engine oil.  
Functional requirements  
A current measured value is available after ap‐  
prox. 30 minutes of normal driving.  
268  
Engine oil  
MOBILITY  
Displaying the engine oil level  
Performing a detailed measurement  
Via iDrive:  
Via iDrive:  
1. "My Vehicle"  
1. "My Vehicle"  
2. "Vehicle status"  
2. "Vehicle status"  
3.  
"Engine oil level"  
3.  
"Engine oil level"  
The engine oil level is displayed.  
4. "Measure engine oil level"  
5. "Start measurement"  
System limits  
The engine oil level is checked and displayed via  
a scale.  
When making frequent short-distance trips or  
using a dynamic driving style, it may not be pos‐  
sible to calculate a measured value. In this case,  
the measured value for the last, sufficiently long  
trip is displayed.  
Adding engine oil  
General information  
Detailed measurement  
Concept  
The engine oil level is checked when the vehicle  
is stationary and displayed via a scale.  
Only add engine oil when the message is dis‐  
played in the instrument cluster. The quantity to  
be added is indicated in the message displayed  
in the instrument cluster.  
Only add suitable types of engine oil, refer to  
page 270.  
If the engine oil level is outside its permissible  
operating range, a Check Control message is  
displayed.  
Safely park the vehicle and switch off the ignition  
before adding engine oil.  
Take care not to add too much engine oil.  
General information  
During the measurement, the idle speed is in‐  
creased somewhat.  
Safety information  
Functional requirements  
WARNING  
Vehicle is parked in a horizontal position.  
Operating materials, for instance oils, greases,  
coolants, fuels, can contain harmful ingredients.  
There is a risk of injuries or danger to life. Fol‐  
low the instructions on the containers. Avoid  
the contact of articles of clothing, skin or eyes  
with operating materials. Do not refill operating  
materials into different bottles. Store operating  
materials out of reach of children.  
Manual transmission: shift lever in neutral po‐  
sition, clutch and accelerator pedals not de‐  
pressed.  
Steptronic transmission: selector lever in se‐  
lector lever position N or P and accelerator  
pedal not depressed.  
Engine is running and is at operating temper‐  
ature.  
269  
Engine oil  
MOBILITY  
NOTE  
Only add the types of engine oil which are listed.  
Safety information  
An engine oil level that is too low causes en‐  
gine damage. There is a risk of damage to  
property. Immediately add engine oil.  
NOTE  
Oil additives can damage the engine. There is a  
risk of damage to property. Do not use oil addi‐  
tives.  
NOTE  
Too much engine oil can damage the engine or  
the catalytic converter. There is a risk of dam‐  
age to property. Do not add too much engine  
oil. When too much engine oil is added, have  
the engine oil level corrected by a dealer’s serv‐  
ice center or another qualified service center or  
repair shop.  
NOTE  
Incorrect engine oil can cause malfunctions in  
the engine or damage it. There is a risk of dam‐  
age to property. When selecting an engine oil,  
make sure that the engine oil has the correct oil  
rating.  
Overview  
The oil filler neck is located in the engine com‐  
partment, refer to page 265.  
Suitable engine oil types  
Add engine oils that meet the following oil rating  
standards:  
Adding engine oil  
1. Open the hood, refer to page 266.  
Gasoline engine  
2. Open the lid counterclockwise.  
BMW Longlife-01 FE.  
BMW Longlife-14 FE+.  
Alternative engine oil types  
If an engine oil suitable for continuous use is not  
available, up to 1 US quart/liter of an engine oil  
with the following oil rating can be added:  
Oil rating  
API SL.  
3. Add engine oil.  
4. Close the cap.  
API SM.  
API SN.  
Engine oil types to add  
General information  
The engine oil quality is critical for the life of the  
engine.  
270  
Engine oil  
MOBILITY  
Viscosity grades  
Viscosity grades  
SAE 0W-20.  
SAE 0W-30.  
More information about suitable engine oil rat‐  
ings and viscosities of engine oils can be re‐  
quested from a dealer’s service center or another  
qualified service center or repair shop.  
Engine oil change  
NOTE  
Engine oil that is not changed in timely fashion  
can cause increased engine wear and thus en‐  
gine damage. There is a risk of damage to  
property. Do not exceed the service data indi‐  
cated in the vehicle.  
The vehicle manufacturer recommends that you  
have a dealer’s service center or another quali‐  
fied service center or repair shop change the en‐  
gine oil.  
271