Deutsch
EnglishControls -> Adjusting for your BMW 3 Series 2013-2019
Controls
Opening and closing
▷
With Comfort Access: if you are carrying
the remote control on your person, grasp
the driver side or front passenger side door
handle completely.
▷
▷
Pull the switch to the resistance
point.
The window closes while the switch is
held.
Pull the switch beyond the resistance
point.
Power windows
Hint
The window closes automatically. Pulling
again stops the motion.
Take the remote control with you
See also: closing by means of Comfort Access,
refer to page 41.
Take the remote control with you when
leaving the vehicle so that children, e.g., can‐
not operate the power windows and injure
themselves.◀
Pinch protection system
Danger of jamming even with pinch pro‐
tection
Even with the pinch protection system, check
that the window's closing path is clear; other‐
wise, the closing action may not stop in certain
situations, e.g., if thin objects are present.◀
No window accessories
Do not install any accessories in the win‐
dow's range of movement; otherwise, the
pinch protection system will be impaired.◀
Opening
If closing force exceeds a specific margin as a
window closes, closing is interrupted.
▷
Press the button to the resistance
point.
The window reopens slightly.
The window opens while the switch is held.
Closing without the pinch protection
system
▷
Press the switch beyond the resist‐
ance point.
Keep the closing path clear
The window opens automatically. Pressing
the switch again stopse the motion.
Monitor closing and make sure that the
closing path of the window is clear; otherwise,
injuries may result.◀
See also: Convenient opening, refer to
page 37, via remote control.
E.g. danger from the outside or ice might pre‐
vent window from closing properly - proceed
as follows:
Closing
Keep the closing path clear
1. Pull the reel past the resistance point and
hold it there.
Monitor closing and make sure that the
closing path of the window is clear; otherwise,
injuries may result.◀
46
Opening and closing
Controls
The pinch protection is limited and the
window reopens slightly if the closing force
exceeds a certain margin.
Extending or retracting roller sunblind
for rear window
Press button.
2. Pull the reel past the resistance point again
within approx. 4 seconds and hold it there.
Roller sunblinds for the rear side
windows
The window closes without jam protection.
Safety switch
Pull out the roller sunblind at the loop and hook
it onto the bracket.
General information
Do not open the window while the roller
sunblind is tilted
The safety switch in the driver's door can be
used to prevent children, e.g., from opening
and closing the rear windows using the
switches in the rear.
Do not open the window while the roller sun‐
blind is tilted; otherwise, there is a risk of dam‐
age at high speeds that may result in personal
injury.◀
Switching on and off
Press button.
The LED lights up if the safety func‐
tion is switched on.
Glass sunroof, powered
General information
The glass sunroof is operational when the igni‐
tion is switched on.
Safety switch for rear operation
Press the safety switch when transport‐
ing children in the rear; otherwise, injury may
result if the windows are closed without super‐
vision.◀
Keep the closing path clear
Monitor closing and make sure that the
closing path of the glass sunroof is clear; oth‐
erwise, injuries may result.◀
Roller sunblinds
Take the remote control with you
Take the remote control with you when
leaving the vehicle so that children, e.g., can‐
not operate the glass sunroof and injure them‐
selves.◀
Roller sunblind for rear window
General information
If you are no longer able to move the roller sun‐
blind for the rear window after having activated
it a number of times in a row, the system is
blocked for a limited time to prevent overheat‐
ing. Let the system cool.
The roller sunblind for the rear window cannot
be moved at low interior temperatures.
47
Controls
Opening and closing
Tilting the glass sunroof
Pinch protection system
If the closing force when closing the glass sun‐
roof exceeds a certain value, the closing move‐
ment is stopped, beginning at approximately
the middle of the opening in the roof, or from
the tilted position during closing.
Push switch briefly upward.
▷
The closed glass sunroof is
tilted.
▷
The opened glass sunroof
closes until it is in its tilted
position. The sliding visor
does not move.
The glass sunroof reopens slightly.
Danger of jamming even with pinch pro‐
tection
Despite the pinch protection system, check
that the glass sunroof's closing path is clear;
otherwise, the closing action may not be inter‐
rupted in certain extreme situations, such as
when thin objects are present.◀
Opening/closing the glass sunroof and
sliding visor together
▷
Press the reel in the desired
direction to the resistance
point and hold it there.
Glass sunroof and sliding vi‐
sor open together as long as
the reel is held down.
Closing from the open position
without pinch protection
E. g. if there is an external danger, proceed as
follows:
The glass sunroof closes as
long as the reel is held
down. The sliding visor can
be manually closed.
1. Press the reel forward beyond the resist‐
ance point and hold.
The pinch protection is limited and the
glass sunroof reopens slightly if the closing
force exceeds a certain margin.
▷
Press the reel in the desired direction past
the resistance point.
The glass sunroof and sliding visor open
automatically.
2. Press the reel forward again beyond the re‐
sistance point and hold until the glass sun‐
roof closes without jam protection. Make
sure that the closing area is clear.
The glass sunroof closes automatically.
The sliding visor can be manually closed.
Pressing the reel upward stops the motion.
Closing from the raised position
without pinch protection
If there is an external danger, push the reel for‐
ward past the resistance point and hold it.
Additional options:
▷
Convenient opening, refer to page 37, via
the remote control.
▷
Closing by means of Comfort Access, refer
to page 41.
The glass sunroof closes without jam protec‐
tion.
Comfort position
Initializing after a power failure
If the glass sunroof is not automatically com‐
pletely opened, the comfort position has been
attained. In this position the wind noises in the
interior are the least.
After a power failure during the opening or
closing process, the glass sunroof can only be
operated to a limited extent.
If desired, continue the movement by pressing
the reel.
48
Opening and closing
Controls
Initializing the system
The system can be initialized when the vehicle
is stationary and the engine is running.
During the initialization, the glass sunroof
closes without jam protection.
Keep the closing path clear
Monitor closing and make sure that the
closing path of the glass sunroof is clear; oth‐
erwise, injuries may result.◀
Press the reel up and hold it until
the initialization is complete:
▷
Initialization begins within
15 seconds and is com‐
pleted when the glass sun‐
roof is completely closed.
▷
The glass sunroof closes without jam pro‐
tection.
49
Controls
Adjusting
Adjusting
Keep the movement area unobstructed
Vehicle features and options
When changing the seat position, keep
the seat's area of movement unobstructed;
otherwise, people might get injured or objects
damaged.◀
This chapter describes all standard, country-
specific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.
Manually adjustable seats
At a glance
Sitting safely
The ideal seating position can make a vital
contribution to relaxed, fatigue-free driving.
The seating position plays an important role in
an accident in combination with:
▷
▷
▷
Safety belts, refer to page 53.
Head restraints, refer to page 54.
Airbags, refer to page 98.
1
2
3
4
5
6
Forward/backward
Seat tilt
Backrest width
Lumbar support
Height
Seats
Backrest tilt
Hints
Do not adjust the seat while driving
Forward/backward
Do not adjust the driver's seat while driv‐
ing, or the seat could respond with unexpected
movement and the ensuing loss of vehicle
control could lead to an accident.◀
Do not incline the backrest too far to the
rear
Do not incline the backrest too far to the rear
while driving, or there is a risk of slipping under
the safety belt in the event of an accident. This
would eliminate the protection normally pro‐
vided by the belt.◀
Pull the lever and slide the seat in the desired
direction.
50
Adjusting
Controls
After releasing the lever, move the seat for‐
ward or back slightly making sure it engages
properly.
to the seat or lift it off to make sure the seat
engages properly.
Electrically adjustable seats
At a glance
Height
Pull the lever and apply your weight to the seat
or lift it off, as necessary.
1
2
3
4
5
Seat and mirror memory
Backrest width
Backrest tilt
Lumbar support
Backrest tilt
Forward/backward, height, seat tilt
General information
The seat setting for the driver's seat is stored
for the profile currently in use. When the vehi‐
cle is unlocked via the remote control, the po‐
sition is automatically retrieved if the Function,
refer to page 44, is activated for this purpose.
Pull the lever and apply your weight to the
backrest or lift it off, as necessary.
Adjustments in detail
1. Forward/back.
Seat tilt
Pull the lever and move the seat to the desired
tilt. After releasing the lever, apply your weight
51
Controls
Adjusting
2. Height.
The curvature is shifted up/
down.
Backrest width
Change the width of the back‐
rest using the side wings to ad‐
just the lateral support.
Front seat heating
3. Seat tilt.
4. Backrest tilt.
Switching on
Press button once for each tempera‐
ture level.
The maximum temperature is reached when
three LEDs are lit.
If the journey is continued within approx. 15
minutes, the seat heating is activated automat‐
ically with the temperature selected last.
Switch off
Lumbar support
Press button longer.
The LEDs go out.
The curvature of the seat backrest can be ad‐
justed in a way that it supports the lumbar re‐
gion of the spine. The lower back and the
spine are supported for upright posture.
▷
Press the front/rear section
of the switch.
The curvature is increased/
decreased.
▷
Press the upper/lower sec‐
tion of the switch.
52
Adjusting
Controls
The upper shoulder strap's anchorage point
will be correct for adult seat occupants of ev‐
ery build if the seat is correctly adjusted.
Rear seat heating
▷
The two outer safety belt buckles,
integrated into the rear seat, are for pas‐
sengers sitting on the left and right.
▷
The center rear safety belt buckle is solely
intended for the center passenger.
Hints
One person per safety belt
Switching on
Never allow more than one person to
wear a single safety belt. Never allow infants or
small children to ride on a passenger's lap.◀
Press button once for each tempera‐
ture level.
The maximum temperature is reached when
three LEDs are lit.
Putting on the belt
Lay the belt, without twisting, snugly
across the lap and shoulders, as close to the
body as possible. Make sure that the belt lies
low around the hips in the lap area and does
not press on the abdomen. Otherwise, the belt
can slip over the hips in a frontal impact and in‐
jure the abdomen.
If the journey is continued within approx. 15
minutes, the seat heating is activated automat‐
ically with the temperature selected last.
Switch off
Press button longer.
The LEDs go out.
The safety belt must not lie across the neck,
rub on sharp edges, be routed over breakable
objects, or be pinched.◀
What reduces the restraining effect
Safety belts
Avoid wearing bulky clothing, and pull
the shoulder belt periodically to readjust the
tension. Make sure that the belt is not jammed;
otherwise, the belt can be damaged and the
restraining effect is reduced.◀
Seats with safety belt
The vehicle has five seats, each of which is
equipped with a safety belt.
General information
Always make sure that safety belts are being
worn by all occupants before driving off.
For the occupants' safety the belt locking
mechanism triggers early. Slowly guide the
belt out of the holder when applying it.
Although airbags enhance safety by providing
added protection, they are not a substitute for
safety belts.
53
