Deutsch
EnglishBEDIENELEMENTE -> Sitze, Spiegel und Lenkrad for your BMW i7 2022-2025
Seats, mirrors and steering wheel
CONTROLS
Seats, mirrors and steering wheel
Vehicle features and options
Warning
With a backrest inclined too far to the rear,
the protective effect of the seat belt can no
longer be ensured. There is a risk of sliding
under the seat belt in an accident. There is a
risk of injury or danger to life. Adjust the seat
prior to starting the trip. Adjust the backrest
so that it is in the most upright position as
possible and do not adjust again while driv-
ing.
This chapter describes model-specific equip-
ment, systems, and functions that are currently
available, or may become available in the fu-
ture, even if they are not present in the vehicle.
Additional information:
Vehicle equipment, refer to page 8.
Sitting safely
An ideal seat position that meets the needs of
the occupants can make a vital contribution to
relaxed, fatigue-free driving.
Warning
There is a danger of jamming when moving
the seats. There is a risk of injury and risk of
property damage. Make sure that the travel
path of the seat is clear prior to any adjust-
ment.
In the event of an accident, the correct seat
position plays an important role. Follow the in-
formation in the following chapters.
Additional information:
▷
▷
▷
▷
Seats, refer to page 111.
Adjusting seats
Seat belts, refer to page 117.
Head restraints, refer to page 120.
Airbags, refer to page 184.
General information
The current seat position can be stored using
the memory function.
Seats, front
Safety information
Warning
Overview
Seat setting while driving can lead to unex-
pected movements of the seat. Vehicle con-
trol could be lost. There is a risk of accident,
injury, and property damage. Only adjust the
seat on the driver's side when the vehicle is
stationary.
The switches for the seat settings are located
at the front doors.
111
Online Edition for Part no. 01405B464B6 - VI/24
Seats, mirrors and steering wheel
CONTROLS
Seat settings menu
Adjusting seat tilt
The seat adjustment menu button is located
on the front door.
Tilt switch up or down.
Adjusting backrest tilt
Press the button to go directly to the
seat settings menu on the control dis-
play.
Setting the longitudinal direction
Tilt switch forward or backward.
Adjusting the seat position
automatically
Press switch forward or backward.
General information
The seat setting for the driver's seat is stored
in the active BMW ID or in the active driver
profile. If the BMW ID or the driver profile is
reactivated at a later time, the saved position
will be called up automatically.
Adjusting the height
Activate/deactivate the function
1.
Apps menu
2. "Vehicle"
3. "Seat comfort"
4. Select driver’s seat.
5. "Use automatically"
6. Select the desired setting.
Press switch up or down.
112
Online Edition for Part no. 01405B464B6 - VI/24
Seats, mirrors and steering wheel
CONTROLS
The curvature is increased/decreased.
Press arrow up/down:
Thigh support
▷
Multifunctional seat
The curvature is shifted up/down.
1.
Apps menu
Functional limitation
2. "Vehicle"
The lumbar support cannot be adjusted at very
low temperatures.
3. "Seat comfort"
4. Select desired seat.
5. Select the desired function.
6. Select the desired setting.
Backrest width
Principle
Comfort adjustment
Adjusting the backrest width may improve side
support when cornering.
Principle
The thigh rest adjusts automatically when the
longitudinal direction is adjusted.
General information
The backrest width is changed by adjusting
the side sections of the backrest.
Activate/deactivate the function
When exiting the vehicle, the backrest width
opens completely. The last set position is au-
tomatically applied before you start driving.
1.
Apps menu
2. "Vehicle"
3. "Seat comfort"
4. Select desired seat.
5. "Comfort adjustment"
Adjusting the backrest width
1.
Apps menu
2. "Vehicle"
Lumbar support
3. "Seat comfort"
4. Select desired seat.
5. Select the desired function.
6. Select the desired setting.
Principle
The curvature of the seat backrest can be ad-
justed in a way that it supports the lumbar
region of the spine. The lower back and the
spine are supported for upright sitting position.
Upper backrest
Principle
Adjusting the lumbar support
The upper backrest supports the back in the
shoulder region. A correct setting leads to a
relaxed seat position and reduces strain on the
shoulder muscles.
1.
Apps menu
2. "Vehicle"
3. "Seat comfort"
4. Select desired seat.
5. Select the desired function.
6. Select the desired setting:
General information
When exiting the vehicle, the upper backrest
moves all the way back. The last set position is
automatically applied before you start driving.
▷
Press arrow left/right:
113
Online Edition for Part no. 01405B464B6 - VI/24
Seats, mirrors and steering wheel
CONTROLS
Adjusting the upper backrest
Safety information
1.
Apps menu
2. "Vehicle"
Warning
3. "Seat comfort"
There is a danger of jamming when moving
the seats. There is a risk of injury and risk of
property damage. Make sure that the travel
path of the seat is clear prior to any adjust-
ment.
4. Select desired seat.
5. Select the desired function.
6. Select the desired setting.
Seat massage
Calibrating the front seats
1. Press the longitudinal direction switch for-
ward for approx. 2 seconds until the seat
stops.
Principle
The seat massage keeps your muscles relaxed
and improves blood circulation in the lumbar
region, which can help avoid fatigue.
2. Repeat step 1 until the seat stops then
moves slightly forward.
Turning the seat massage on/off
3. Press the switch forward for approx. 2 sec-
onds again until the seat stops.
1.
Apps menu
2. "Vehicle"
4. Repeat step 3 until the seat stops then
moves slightly backward.
3. "Seat comfort"
As soon as the message on the control dis-
play disappears, the calibration is complete.
If the message remains active, repeat the cali-
bration.
4. Select desired seat.
5. "Massage"
6. "Massage"
7. If necessary, select the desired setting.
If the message is still shown after repeated
calibration, have the vehicle checked by an
authorized service center or another qualified
service center or repair shop.
The seat massage is stopped when the lumbar
support is operated.
Functional limitation
The massage function is not available at very
low temperatures.
If the vehicle is equipped with Executive
Lounge Seating, have the front passenger seat
calibrated by an authorized service center or
another qualified service center or repair shop.
Calibrating the front seats
Rear seats
General information
As soon as the electric seat setting no longer
functions precisely, a Check Control message
is displayed on the control display.
General information
Adjust the seat settings using BMW Touch
Command.
To restore the accuracy of the electric seat set-
ting, the front seats must be calibrated.
Depending on vehicle equipment, the following
seat settings are available:
114
Online Edition for Part no. 01405B464B6 - VI/24
Seats, mirrors and steering wheel
CONTROLS
▷
▷
▷
▷
▷
▷
▷
Longitudinal direction.
Seat tilt.
Adjusting the seats
1. "Seats"
Backrest tilt.
2. "Adjustment"
3. Select desired seat.
Upper backrest.
Lumbar support.
Executive Lounge Seating.
Seat massage.
4. Select the desired function.
5. Select the desired setting.
Upper backrest
Safety information
The upper backrest supports the back in the
shoulder region. A correct setting leads to a
relaxed seat position and reduces strain on the
shoulder muscles.
Warning
There is a danger of jamming when moving
the seats. There is a risk of injury and risk of
property damage. Make sure that the travel
path of the seat is clear prior to any adjust-
ment.
Lumbar support
General information
The curvature of the seat backrest can be ad-
justed in a way that it supports the lumbar re-
gion of the spine. The lower back and spine
are supported to promote an upright sitting po-
sition.
Warning
There is a danger of jamming when folding
down the center armrest in the rear. There
is a risk of injury. Make sure that the area
of movement of the center armrest is clear
when folding down.
Functional limitation
The lumbar support cannot be adjusted at very
low temperatures.
Executive Lounge Seating
Overview
Principle
The Executive Lounge Seating function ena-
bles rear passengers on the front passenger’s
side to travel more comfortably, e.g., by adjust-
ing different seat functions.
Safety information
Warning
BMW Touch Command is located in the door
handle of the rear doors.
If the front passenger seat is set too far for-
ward, the view from the front passenger win-
dow may be restricted, e.g., on the exterior
mirror. There is a risk of accident. Adjust
the front passenger seat such that the view
115
Online Edition for Part no. 01405B464B6 - VI/24
Seats, mirrors and steering wheel
CONTROLS
from the front passenger window is not ob-
structed.
Leg rest
If there is sufficient distance between the front
passenger seat and rear seat, the leg rest in
the rear can be folded out electrically using
BMW Touch Command.
NOTICE
The leg rest folds down with excessive load,
for instance when a heavy object is placed on
it. To return to the initial position, grasp the leg
rest with both hands and lift until it clicks into
place.
The seat surface may be damaged if the
front passenger seat is always set forward.
There is a risk of property damage. After us-
ing this function, move the front passenger
seat to the base position.
Footrest
Retrieving the seat position
1. "Seats"
If there is sufficient distance between the front
passenger seat and rear seat, the footrest in
the rear can be folded out using BMW Touch
Command.
2. "Adjustment"
3.
Tap on the icon.
Base position
Adjusting the seat position
1. "Seats"
Principle
The passenger side seats can be moved to a
basic position to make it easier to get in and
out of the vehicle.
2. "Adjustment"
3. Select desired seat.
4. Select the desired function.
5. Select the desired setting.
Moving to the base position
1. "Seats"
2. "Adjustment"
Adjusting the front passenger seat
from the rear
3. Select the desired setting.
The front passenger seat can be operated
from the rear, for instance to increase the leg-
room in the rear.
If vehicle is equipped with Executive Lounge
Seating: The seats move automatically to the
base position. This function can be deactivated
for the front passenger seat.
The front passenger seat can only be adjusted
if no one is sitting on it.
1. "Seats"
1. "Seats"
2. "Adjustment"
2. "Adjustment"
3. "Comfort exit"
4. Select the desired setting.
3. Select desired seat.
4. Select the desired function.
5. Select the desired setting.
116
Online Edition for Part no. 01405B464B6 - VI/24
Seats, mirrors and steering wheel
CONTROLS
Seat massage
General information
Front seats:
Principle
▷
The backrest width completely opens tem-
porarily.
The seat massage keeps your muscles relaxed
and improves blood circulation in the lumbar
region, which can help avoid fatigue.
▷
The seat moves back.
Rear seats:
▷
▷
The seat moves to the base position.
The leg rest and foot rest move down.
Turning the seat massage on/off
1. "Seats"
2. "Massage"
Safety information
3. "On"
4. Select the desired setting.
Warning
Functional limitation
The massage function is not available at very
low temperatures.
Because the leg rest folds in automatically
when the door is opened, there is a risk that
your leg may be trapped. There is a risk of
injury and risk of property damage. Before
opening the door, make sure that the leg
rest’s travel path is clear.
Locking the rear seats
Principle
The rear seat adjustment functions can be
locked via the control display. Locking func-
tions is useful, for instance, when children or
animals are carried in the rear.
Activating/deactivating the setting
Front seats:
1.
Apps menu
2. "Vehicle"
Activating/deactivating the setting
3. "Seat comfort"
4. "Comfort exit"
5. Select the desired setting.
Rear seats:
1.
Apps menu
2. "Vehicle"
3. "Seat comfort"
4. "Lock rear seats"
5. Select the desired setting.
Depending on vehicle equipment, settings are
applied automatically.
Comfort exit
Seat belts
Principle
General information
The vehicle is fitted with five seat belts to en-
sure occupant safety. However, they can only
offer protection when adjusted correctly.
The seat position can be adjusted automati-
cally to make it easier to get in and out of the
vehicle.
Always make sure that seat belts are being
worn by the occupants before driving off. The
117
Online Edition for Part no. 01405B464B6 - VI/24
Seats, mirrors and steering wheel
CONTROLS
airbags supplement the seat belts as an ad-
ditional safety device. The airbags do not re-
place seat belts.
Warning
The protective effect of safety gear, including
seat belts, may not be fully operational or fail
in the following situations:
All seat belt anchorage points are designed to
achieve the best possible protective effect for
the seat belts when used properly and with the
correct seat settings.
▷
The seat belts or seat belt buckles are
damaged, soiled, or changed in any
other way.
The two outer seat belt buckles of the rear
seats are intended for the persons sitting on
the left and right.
▷
Seat belt tensioners or seat belt winders
were modified.
The center seat belt buckle of the rear seats is
intended for the person sitting in the middle.
Seat belts can be imperceptibly damaged in
the event of an accident. There is a risk of
injury or danger to life. Keep clean and do
not modify: seat belts, seat belt buckles, seat
belt tensioners, seat belt winders, and seat
belt anchors. After an accident, have the seat
belts checked by an authorized service center
or another qualified service center or repair
shop.
Additional information:
Notes on sitting safely, refer to page 111.
Safety information
Warning
Use of a seat belt to buckle more than one
person will potentially defeat the ability of
the seat belt to serve its protective function.
There is a risk of injury or danger to life.
Do not strap in more than one person per
single seat belt. Infants and children are not
allowed on an occupant's lap, and must be
transported and secured in designated child
restraint systems.
Correct use of seat belts
▷
Wear the seat belt tight to your body over
your lap and shoulders, without twisting it.
▷
Wear the seat belt deep on your hips over
your lap. The seat belt must not press on
your stomach.
▷
Do not rub the seat belt against sharp
edges, or guide it or jam it in across hard
or fragile objects.
Warning
▷
▷
Avoid thick clothing.
The protective effect of safety gear, including
seat belts, can be limited or lost when seat
belts are fastened incorrectly. An incorrectly
fastened seat belt can cause additional inju-
ries, for instance in the event of an accident,
braking or evasive maneuvers. There is a risk
of injury or danger to life. Make sure that all
occupants are wearing seat belts correctly.
Re-tighten the seat belt frequently upward
around your upper body area.
118
Online Edition for Part no. 01405B464B6 - VI/24
Seats, mirrors and steering wheel
CONTROLS
A Check Control message is displayed where
applicable. Check whether the seat belt has
been fastened correctly.
Buckling the seat belt
1. Guide the seat belt slowly over shoulder
and hip to put it on.
Icon
Meaning
2. Insert the buckle tongue into the seat belt
buckle. The seat belt buckle must engage
audibly.
Seat belt on the driver's seat is
not buckled.
Seat belt on the passenger
seat or another seat in the ve-
hicle is not buckled.
Seat belt is buckled on the cor-
responding seat.
Seat belt is not buckled on the
corresponding seat.
To ease accessibility to the seat belt buckle, an
adjustable slider is available on the belt to help
position the buckle when not in use.
Rear Occupant Alert
Unbuckling the seat belt
Principle
1. Hold down the seat belt firmly.
At the end of a trip, the system informs the
driver of the possible presence of occupants on
the rear seats.
2. Press the red button in the seat belt buckle.
3. Guide the seat belt back into the seat belt
winder.
General information
If a door with access to the rear seat row is
operated within 30 minutes before starting a
drive, a notice appears on the control display
and a signal tone sounds at the end of the
drive.
Seat belt reminder
General information
Make sure that the seat belts are positioned
correctly.
If the drive is continued within 30 minutes, the
notice is displayed again after the drive is com-
plete.
The seat belt reminder becomes active in the
following situations:
▷
▷
▷
When the seat belt on the driver's side or
on the passenger's side is not fastened.
Activate/deactivate the function
When the seat belt is unfastened while driv-
ing.
1.
Apps menu
2. "System settings"
When objects are lying on a seat.
3. "Rear Occupant Alert"
4. Select the desired setting.
Display in the instrument cluster
The indicator light in the instrument cluster illu-
minates after turning on the drive-ready state
when the seat belt reminder is active.
119
Online Edition for Part no. 01405B464B6 - VI/24
Seats, mirrors and steering wheel
CONTROLS
Safety mode
Warning
Depending on vehicle equipment, the driver
and front passenger seat belt straps are auto-
matically tightened once after driving off, if the
seat belt is fastened.
Body parts can be jammed when moving the
head restraint. There is a risk of injury. Make
sure that the area of movement is clear when
moving the head restraint.
If necessary, in critical driving situations, e.g.,
during emergency braking, the front seat belts
are automatically pretensioned.
Warning
After a critical driving situation without an acci-
dent, the front seat belts are loosened again. If
the belt tension does not loosen automatically,
stop the vehicle and unbuckle the seat belt us-
ing the red button in the buckle. Fasten the
seat belt before continuing to drive.
Objects on the head restraint reduce the pro-
tective effect in the head and neck area.
There is a risk of injury.
▷
▷
Do not use seat or head restraint covers.
Do not hang objects, for instance clothes
hangers, directly on the head restraint.
Front head restraints
Safety information
Warning
▷
▷
Only use accessories that have been de-
termined to be safe for attachment to a
head restraint.
Do not use any accessories, for instance
pillows, while driving.
Removal or incorrect adjustment of head re-
straints can cause injuries in the head and
neck area. There is a risk of injury.
Active head restraint
In the event of a rear-end collision with a
certain severity, the active head restraint auto-
matically reduces the distance from the head.
▷
Before driving, install the removed head
restraints on the occupied seats.
Have the active head restraint checked and if
necessary replaced in the case of damage or if
it was exposed to an accident.
▷
Adjust the head restraint so its center
supports the back of the head at as
close to eye level as possible.
▷
▷
Adjust the distance so that the head re-
straint is as close as possible to the back
of the head. Adjust the distance via the
backrest tilt as needed.
Adjusting the height
For manually adjustable head restraints:
After adjusting, make sure that the head
restraint is correctly engaged.
Press switch up or down.
120
Online Edition for Part no. 01405B464B6 - VI/24
Seats, mirrors and steering wheel
CONTROLS
▷
▷
Adjust the distance so that the head re-
straint is as close as possible to the back
of the head. Adjust the distance via the
backrest tilt as needed.
Adjusting the distance: Manual
head restraints
For manually adjustable head restraints:
After adjusting, make sure that the head
restraint is correctly engaged.
Warning
Body parts can be jammed when moving the
head restraint. There is a risk of injury. Make
sure that the area of movement is clear when
moving the head restraint.
▷
▷
Back: press the button and push the head
restraint toward the rear.
Forward: pull the head restraint toward the
front.
Warning
Setting the distance: Multi-function
seat
The distance to the back of the head is ad-
justed via the backrest inclination.
Objects on the head restraint reduce the pro-
tective effect in the head and neck area.
There is a risk of injury.
▷
▷
Do not use seat or head restraint covers.
Adjust the distance so that the head restraint
is as close as possible to the back of the head.
Do not hang objects, for instance clothes
hangers, directly on the head restraint.
▷
▷
Only use accessories that have been de-
termined to be safe for attachment to a
head restraint.
Removing the head restraints
The head restraints cannot be removed.
Do not use any accessories, for instance
pillows, while driving.
Rear head restraints
Safety information
Warning
Folding down the middle head
restraint
General information
Removal or incorrect adjustment of head re-
straints can cause injuries in the head and
neck area. There is a risk of injury.
To improve the view to the rear, the center
head restraint can be folded down. Only fold
down the head restraint if no one will be sitting
in the center seat.
▷
Before driving, install the removed head
restraints on the occupied seats.
▷
Adjust the head restraint so its center
supports the back of the head at as
close to eye level as possible.
121
Online Edition for Part no. 01405B464B6 - VI/24
Seats, mirrors and steering wheel
CONTROLS
Folding down the head restraint
Adjusting the height
1. "Seats"
2. Select desired seat.
3. Select the desired function.
4. Select the desired setting.
Removing the head restraint
The head restraints cannot be removed.
Cushions for head restraints in rear
Press button, arrow 1, and fold the head re-
straint back.
General information
Cushions can be attached to the outer head
restraints for increased comfort while driving.
To return the head restraint to its initial posi-
tion, fold the head restraint forward as far as
it will go. Make sure that the head restraint
engages correctly.
Safety information
Adjusting the height: manual head
restraints
Warning
The protective effect of the head restraints
may be limited or counteracted if the cushion
is incorrectly fitted. There is a risk of injury.
Make sure that the top edge of the cushion is
below the mark.
▷
▷
To lower: press the button, arrow 1, and
push the head restraint down.
To raise: push the head restraint up.
Adjusting the height: Electric head
restraints
General information
The height adjustment of the head restraint is
deactivated when the safety switch for the rear
windows has been pressed.
Additional information:
Safety switch, refer to page 107.
122
Online Edition for Part no. 01405B464B6 - VI/24
Seats, mirrors and steering wheel
CONTROLS
Attaching cushions
1. Attach the cushion with the clip to the tab
on the back of the head restraint.
Exterior mirrors
General information
The front passenger's side exterior mirror is
more curved than the driver's side mirror.
The exterior mirror adjustment is stored in the
active BMW ID or in the active driver profile. If
the BMW ID or the driver profile is reactivated
at a later time, the stored position is called up
automatically.
The current exterior mirror adjustment can be
stored using the memory function.
2. Bring the head restraint to a sufficiently
high position.
Depending on vehicle equipment, the driver's
side exterior mirror also dims automatically.
Photocells in the interior mirror are used to
control this.
3. Close the push-buttons.
Depending on vehicle equipment, both exterior
mirrors are heated automatically as necessary
and when drive-ready state is on.
Safety information
Warning
Objects in the mirror are closer than they ap-
pear. The distance to the road users behind
could be incorrectly estimated, for instance
while changing lanes. There is a risk of acci-
dent, injury, and property damage. Estimate
the distance to the traffic behind by looking
over your shoulder.
Adjusting the height
Overview
Grasp the cushion with both hands and slide it
up or down.
Adjust the height so that the top edge of the
cushion is below the mark, arrow 1.
123
Online Edition for Part no. 01405B464B6 - VI/24
Seats, mirrors and steering wheel
CONTROLS
Meaning
Press the button.
Icon
Fold the exterior mirror in and out.
Folding is possible at vehicle speeds of up to
approx. 12 mph/20 km/h.
Adjust the exterior mirrors.
Folding the exterior mirrors in and out is help-
ful in the following situations:
▷
▷
In car washes.
Select left exterior mirror, Automatic
Curb Monitor.
On narrow roads.
Exterior mirrors that were folded in are folded
out automatically at a speed of approx.
25 mph/40 km/h.
Select right exterior mirror.
Automatic heating
Both exterior mirrors are automatically heated
as needed and when the drive-ready state is
switched on.
Adjusting the exterior mirrors
Press the button.
The selected exterior mirror moves
along with the button movement.
Automatic dimming
The exterior mirror on the driver's side is au-
tomatically dimmed. Photocells in the interior
mirror are used to control this.
Selecting the exterior mirror
▷
Press the button to select the left
exterior mirror. The LED illuminates.
Automatic Curb Monitor
▷
Press the button to select the right
exterior mirror. The LED illuminates.
Principle
If reverse gear is engaged, the mirror glass on
the passenger's side is tilted downward. This
improves your view of the curb and other low-
lying obstacles when parking, for instance.
Malfunction
In case of an electrical malfunction, adjust the
exterior mirror by pressing on the edges of the
mirror glass.
Activating the Automatic Curb Monitor
Folding in/folding out the exterior
mirrors
1.
Press the button. The LED illumi-
nates.
2. Engage selector lever position R.
NOTICE
Depending on the vehicle width, the vehicle
can be damaged in car washes. There is a
risk of property damage. Before washing, fold
in the mirrors by hand or with the button.
Deactivating the Automatic Curb
Monitor
Press the button. The LED illuminates
and the LED of the driver’s side outside
mirror goes out.
124
Online Edition for Part no. 01405B464B6 - VI/24
Seats, mirrors and steering wheel
CONTROLS
Electric steering wheel adjustment
Interior mirror, automatic
dimming feature
General information
The steering wheel adjustment is stored in the
active BMW ID or in the active driver profile. If
the BMW ID or the driver profile is reactivated
at a later time, the stored position is called up
automatically.
General information
The interior mirror is dimmed automatically.
Photocells are used for control:
▷
▷
In the mirror glass.
The current steering wheel position can be
stored using the memory function.
On the rear of the mirror.
To make it easier to enter and get out of the
vehicle, the steering wheel moves temporarily
into the upper position.
Overview
Adjusting the steering wheel position
Functional requirements
▷
Keep the photocells clean.
▷
Do not cover the area between the interior
mirror and the windshield.
Press the switch to adjust the steering wheel
forward/back position and height to the seat
position.
Steering wheel
Safety information
Warning
Memory function
Principle
The following settings can be stored and, if
necessary, retrieved using the memory func-
tion:
Steering wheel adjustments while driving
can lead to unexpected steering wheel move-
ments. Vehicle control could be lost. There
is a risk of accident, injury, and property dam-
age. Adjust the steering wheel while the vehi-
cle is stationary only.
▷
▷
▷
▷
▷
Seat position.
Exterior mirror adjustment.
Steering wheel position.
Lumbar support position.
Height of the Head-up display.
125
Online Edition for Part no. 01405B464B6 - VI/24
Seats, mirrors and steering wheel
CONTROLS
Safety information
Icon
Meaning
SET button.
Warning
Using the memory function while driving can
lead to unexpected seat or steering wheel
movements. Vehicle control could be lost.
There is a risk of accident, injury, and prop-
erty damage. Only retrieve the memory func-
tion when the vehicle is stationary.
Memory button 1.
Memory button 2.
Storing settings
Using the button:
Warning
There is a danger of jamming when moving
the seats. There is a risk of injury and risk of
property damage. Make sure that the travel
path of the seat is clear prior to any adjust-
ment.
1. Set the desired position.
2.
Press the button. The LED illumi-
nates.
3. Press the desired memory button as long
as the LED is illuminated. A signal sounds.
Memory function, front
Via iDrive:
Overview
1.
Apps menu
2. "Vehicle"
3. "Seat comfort"
4. Select desired seat.
5. "Seat position"
6. Save the desired seat position.
Calling up settings
Using the button:
The memory buttons are located on the front
doors.
Press the desired memory button 1 or 2.
The stored position is called up.
The procedure stops when a seat setting
switch or one of the memory buttons is
pressed again.
The adjustment of the seat position on the
driver's side is interrupted after a short time
while driving.
126
Online Edition for Part no. 01405B464B6 - VI/24
Seats, mirrors and steering wheel
CONTROLS
Via iDrive:
The stored position is called up.
The procedure stops when a seat setting
switch or one of the memory buttons is
pressed again.
1.
Apps menu
2. "Vehicle"
3. "Seat comfort"
4. Select desired seat.
5. "Seat position"
6. Select the desired seat position.
Seat climate control
Various climate control functions are available
for the seats.
Memory function, rear
Additional information:
Climate control, refer to page 287.
Overview
The memory function is operated via BMW
Touch Command.
Icon
Meaning
SET button
Memory button 1
Memory button 2
Storing settings
1. Set the desired position.
2. "SET"
3. Press the desired memory button 1 or 2.
Calling up settings
Press the desired memory button 1 or 2.
127
Online Edition for Part no. 01405B464B6 - VI/24
