Deutsch
EnglishBEDIENELEMENTE -> Sensoren des Fahrzeugs for your BMW i7 2022-2025
Sensors of the vehicle
CONTROLS
Sensors of the vehicle
Vehicle features and options Cameras
This chapter describes model-specific equip-
Front camera
ment, systems, and functions that are currently
available, or may become available in the fu-
ture, even if they are not present in the vehicle.
Additional information:
Vehicle equipment, refer to page 8.
Overview
Depending on the equipment, the following
cameras and sensors are installed in the vehi-
cle:
The front camera is located in the radiator
grille.
▷
▷
▷
▷
▷
▷
▷
▷
Front camera.
Camera behind the windshield
Camera behind the windshield.
Top view cameras.
Rearview camera.
Front radar sensor.
Radar sensors, side, front.
Radar sensors, side, rear.
Ultrasonic sensors in the front/rear bump-
ers.
▷
Ultrasonic sensors, side.
The camera behind the windshield is located
near the interior mirror.
38
Online Edition for Part no. 01405B464B6 - VI/24
Sensors of the vehicle
CONTROLS
▷
When the camera field of view is covered,
for instance by a fogged up windshield or
labels.
Top view cameras
▷
▷
▷
▷
If the camera lens is dirty or damaged.
With exterior mirrors folded in.
With open doors or open cargo area.
When driving toward bright lights or strong
reflections, e.g., setting sun.
▷
▷
When it is dark outside.
The camera has overheated due to exces-
sive temperatures and temporarily turned
off.
One exterior mirror camera is located at the
bottom of each exterior mirror housing.
▷
During calibration of the camera immedi-
ately after vehicle delivery.
Rearview camera
If applicable, a Check Control message will be
displayed when the system limits are reached.
Radar sensors
Safety information
Warning
The rearview camera is located in the badge
on the rear of the vehicle.
The vehicle radar sensors and thus also the
driver assistance systems can be impaired by
external influences, e.g., interference. There
is a risk of accident, injury, or property dam-
age. Watch the surrounding traffic situation
closely, be ready to take over steering and
braking at any time, and actively intervene
where appropriate.
Functional requirement of the
cameras
The areas of the cameras are clean and clear.
Additional information:
▷
▷
Washing the vehicle, refer to page 392.
Vehicle care, refer to page 394.
System limits of the cameras
The cameras may not work properly, e.g.,
show something that is incorrect, in the follow-
ing situations:
▷
▷
In heavy fog, wet conditions, or snowfall.
On steep hills, in steep depressions or in
tight curves.
39
Online Edition for Part no. 01405B464B6 - VI/24
Sensors of the vehicle
CONTROLS
Front radar sensor
Functional requirement of the radar
sensors
The areas of the radar sensors are clean and
clear.
Additional information:
▷
▷
Washing the vehicle, refer to page 392.
Vehicle care, refer to page 394.
System limits of the radar sensors
The function of the radar sensors may be re-
stricted or not available, for instance in the fol-
lowing situations:
The front radar sensor is located in the radiator
grille.
▷
▷
▷
In case of dirty sensors.
Radar sensors, side, front
In case of iced-up sensors.
If sensors are covered such as by labels,
films or a license-plate carrier.
▷
▷
▷
If the sensor is not aligned correctly, for in-
stance due to parking damage.
If the radiation range of the sensors is cov-
ered, e.g., by protruding cargo.
When the field of view of the sensors is cov-
ered, e.g., by garage walls, hedges, snow
hills, vehicles or trailers.
The radar sensors are located on the side of
the front bumper.
▷
▷
After improper paint work on the vehicle in
the area of the sensors.
On steep hilltops or in sharp dips in the
road.
Radar sensors, side, rear
If applicable, a Check Control message will be
displayed when the system limits are reached.
The radar sensors are located on the side of
the rear bumper.
40
Online Edition for Part no. 01405B464B6 - VI/24
Sensors of the vehicle
CONTROLS
Ultrasonic sensors
Ultrasonic sensors, front
The ultrasonic sensors for the automatic doors
are located near the door handles and below
the door opening in the sill.
The ultrasonic sensors of the parking assis-
tance systems are located in the front bumper.
Functional requirement of the
ultrasonic sensors
The areas of the ultrasonic sensors are clean
and clear.
Ultrasonic sensors, rear
Additional information:
▷
▷
Washing the vehicle, refer to page 392.
Vehicle care, refer to page 394.
System limits of the ultrasonic
sensors
The detection of objects with ultrasonic meas-
urements can run into physical limits, e.g., in
the following situations:
The ultrasonic sensors of the parking assis-
tance systems are located in the rear bumper.
▷
▷
▷
▷
For piles of snow and ice as well as snow-
covered objects.
If the sensors are dirty or covered, e.g., by
stickers.
Ultrasonic sensors, side
If the sensor is not aligned correctly, for in-
stance due to parking damage.
After improper paint work on the vehicle in
the area of the sensors.
▷
▷
For small children and animals.
For persons with certain clothing, for in-
stance jacket.
▷
▷
For objects covered by fabric, e.g., tents.
The ultrasonic sensors for the parking assis-
tance systems are located on the sides of the
front and rear bumpers.
With obstacles and persons at the edge of
the lane.
41
Online Edition for Part no. 01405B464B6 - VI/24
Sensors of the vehicle
CONTROLS
▷
▷
In case of external interference with the
ultrasonics, for instance from passing ve-
hicles, loud machines or other ultrasonic
sources.
▷
▷
Due to heavy exhaust.
Cargo that extends beyond the perimeter of
the vehicle is not taken into account by the
ultrasonic sensors.
Under certain weather conditions, e.g., high
moisture, wet conditions, snowfall, cold, ex-
treme heat, or strong wind.
If applicable, a Check Control message will be
displayed when the system limits are reached.
▷
▷
▷
With tow bars and trailer hitches of other
vehicles.
For handlebars, pedals, or other bicycle or
motorcycle attachments.
For thin or wedge-shaped objects, e.g., ad-
jacent parked vehicle with open door, pillars
turned 45°.
▷
▷
With moving objects.
With elevated, protruding objects such as
ledges.
▷
▷
With objects with corners, edges, and
smooth surfaces.
For objects with fine surfaces or structures,
e.g., wire mesh fences, shopping carts, lad-
ders, scaffolding.
▷
▷
For objects with porous surfaces.
With small and low objects, for instance
boxes.
▷
For protruding objects, e.g., handles on
strollers or wheelchairs, mirrors on adjacent
vehicles.
▷
▷
For horizontal objects without support
structure on ground, e.g., chains, tables.
Low objects already displayed, for instance
curbs, can be outside of the detection
ranges of the sensors.
▷
For soft obstacles or obstacles covered
with foam, e.g., hoses.
▷
▷
▷
With plants and bushes.
In automatic car washes.
For uneven surfaces, e.g., speed bumps,
damaged curbstones.
42
Online Edition for Part no. 01405B464B6 - VI/24
